BS EN 61883-1-2009 Consumer audio video equipment Digital interface General《消费性音频 视频设备 数字接口 概述》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationConsumer audio/video equipment Digital interfacePart 1: GeneralBS EN 61883-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 22/11/2011 07:52, Uncontrolled Copy, (c) B

2、SINational forewordThis British Standard is the UK implementation of EN 61883-1:2009. It is identical to IEC 61883-1:2008. It supersedes BS EN 61883-1:2003, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video and multimedia systems an

3、d equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 76164 5 ICS 33.160.01; 35.2

4、00Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61883-1:2009Li

5、censed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 22/11/2011 07:52, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61883-1 NORME EUROPENNE EUROPISCHE NORM August 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komite

6、e fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61883-1:2009 E ICS 33.160.01; 35.200 Supersedes EN 61883-1:2003English version Consumer a

7、udio/video equipment - Digital interface - Part 1: General (IEC 61883-1:2008) Matriel audio/vido grand public - Interface numrique - Partie 1: Gnralits (CEI 61883-1:2008) Audio/Video-Gerte der Unterhaltungselektronik - Digitale Schnittstelle - Teil 1: Allgemeines (IEC 61883-1:2008) This European Sta

8、ndard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concer

9、ning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into i

10、ts own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

11、 Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61883-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 22/11/2011 07:52, Uncontrolled Copy, (c) BSIEN 61883-1:200

12、9 Foreword The text of document 100/1236/CDV, future edition 3 of IEC 61883-1, prepared by technical area 4, Digital system interfaces and protocols, of IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 618

13、83-1 on 2009-07-01. This European Standard supersedes EN 61883-1:2003. The significant technical changes with respect to EN 61883-1:2003 are as follows: allocation of a new FMT code for the 1394 Trade Association specification 601 over 1394; clarification of the meaning of FMT code; harmonization of

14、 EN 61883-1 with IEEE 1394.1 for speeds over S400. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-04-01 latest date by which the national standards conflicting with the

15、EN have to be withdrawn (dow) 2012-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61883-1:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 61883-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS

16、, 22/11/2011 07:52, Uncontrolled Copy, (c) BSIEN 61883-1:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only t

17、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEEE

18、 212 2001 Standard for a Control and Status Registers (CSR) - Architecture for microcomputer buses - - IEEE 1394 1995 Standard for a High Performance Serial Bus - - IEEE 1394a 2000 Standard for a High Performance Serial Bus - Amendment 1 - - BS EN 61883-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CH

19、INA STANDARDS, 22/11/2011 07:52, Uncontrolled Copy, (c) BSI61883-1 IEC:2008(E) CONTENTS 1 Scope and object. 7 2 Normative references 7 3 Abbreviations . 7 4 High-performance serial bus layers 8 4.1 Cable physical layer 8 4.2 Link layer 8 4.3 Transaction layer. 8 5 Minimum node capabilities .8 5.1 Se

20、rial bus management. .8 5.2 Command and status registers 8 5.2.1 CSR core registers . .8 5.2.2 Serial bus node registers . .9 5.2.3 Configuration ROM requirements.9 6 Real time data transmission protocol . 12 6.1 Common isochronous packet (CIP) format 12 6.1.1 Isochronous packet structure. 12 6.1.2

21、Packet header structure. .12 6.1.3 CIP header structure .13 6.2 Transmission of fixed length source packet . .13 6.2.1 Two-quadlet CIP header (form_0=0, form_1=0) . 14 6.2.2 Isochronous packet transmission .17 7 Isochronous data flow management17 7.1 General .17 7.2 Plugs and plug control registers

22、. 18 7.3 Connections . 19 7.4 Plug states . 20 7.5 OUTPUT_MASTER_PLUG register definition .22 7.6 INPUT_MASTER_PLUG register definition . 23 7.7 OUTPUT_PLUG_CONTROL register definition . .23 7.8 INPUT_PLUG_CONTROL register definition.25 7.9 Plug control register modification rules 26 7.10 Bus reset.

23、27 7.11 Plug control register access rules .27 8 Connection management procedures (CMP). 28 8.1 Introduction . .28 8.2 Managing point-to-point connections . 29 8.2.1 Procedure for establishing a point-to-point connection 29 8.2.2 Procedure for overlaying a point-to-point connection . . 30 8.2.3 Proc

24、edure for breaking a point-to-point connection 31 8.3 Managing broadcast-out connections . .32 8.3.1 Procedure for establishing a broadcast-out connection . 32 8.3.2 Procedure for overlaying a broadcast-out connection. . 33 8.3.3 Procedure for breaking a broadcast-out connection . 33 8.4 Managing br

25、oadcast-in connections34 BS EN 61883-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 22/11/2011 07:52, Uncontrolled Copy, (c) BSI61883-1 IEC:2008(E) 8.4.1 Procedure for establishing a broadcast-in connection . 34 8.4.2 Procedure for overlaying a broadcast-in connection. 35 8.4.3 Procedu

26、re for breaking a broadcast-in connection . 35 8.5 Managing connections after a bus reset 36 8.5.1 Procedure for restoring a point-to-point connection after a bus reset . 36 8.5.2 Procedure for restoring a broadcast-out connection after a bus reset 37 8.5.3 Procedure for restoring a broadcast-in con

27、nection after a bus reset . . 38 9 Function control protocol (FCP) .38 9.1 Introduction . .38 9.2 Asynchronous packet structure. 39 9.3 FCP frame structure 40 9.3.1 Vendor unique command/transaction set . 41 9.3.2 Extended command/transaction set . .42 Figure 1 Configuration ROM 10 Figure 2 Isochron

28、ous packet 12 Figure 3 CIP header. .13 Figure 4 Model of transmission of source packets . 14 Figure 5 Two quadlets CIP header (Form_0, Form_1=0) . .14 Figure 6 Source packet header format .15 Figure 7 Plug and PR usage 19 Figure 8 Connections 20 Figure 9 Plug state diagram .21 Figure 10 oMPR format

29、.22 Figure 11 iMPR format 23 Figure 12 oPCR format .24 Figure 13 iPCR format 26 Figure 14 PCR address map 27 Figure 15 Point-to-point and broadcast connection counter modifications . . 29 Figure 16 Establishing a point-to-point connection 30 Figure 17 Overlaying a point-to-point connection .31 Figur

30、e 18 Breaking a point-to-point connection . .32 Figure 19 Establishing a broadcast-out connection . 33 Figure 20 Overlaying a broadcast-out connection. . 33 Figure 21 Breaking a broadcast-out connection . . 34 Figure 22 Establishing a broadcast-in connection . 35 Figure 23 Overlaying a broadcast-in

31、connection. . 35 Figure 24 Breaking a broadcast-in connection 36 Figure 25 Time chart of connection management and PCR activities .36 Figure 26 Restoring a point-to-point connection .37 Figure 27 Restoring a broadcast-out connection 38 Figure 28 Restoring a broadcast-in connection . .38 Figure 29 Co

32、mmand register and response register . .39 Figure 30 Write request for data block packet of IEEE 1394.40 Figure 31 Write request for data quadlet packet of IEEE 1394 . .40 BS EN 61883-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 22/11/2011 07:52, Uncontrolled Copy, (c) BSI61883-1 IEC

33、:2008(E) Figure 32 FCP frame structure . .41 Figure 33 Vendor unique frame format .42 Table 1 Unit_SW_Version code assignment 11 Table 2 Code allocation of FN. 15 Table 3 Time stamp field of source packet header . .16 Table 4 Placing of data block sequence . .16 Table 5 Code allocation of FMT 16 Tab

34、le 6 Time stamp of SYT field .17 Table 7 oMPR/iMPR/oPCR speed encoding spd and extended speed encoding xspd22 Table 8 oPCR overhead ID encoding .25 Table 9 CTS: Command/transaction set encoding . 41 BS EN 61883-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 22/11/2011 07:52, Uncontroll

35、ed Copy, (c) BSI61883-1 IEC:2008(E) 7 CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE Part 1: General 1 Scope and object This part of IEC 61883 specifies a digital interface for consumer electronic audio/video equipment using IEEE 1394. It describes the general packet format, data flow management a

36、nd connection management for audio-visual data, and also the general transmission rules for control commands. The object of this standard is to define a transmission protocol for audio-visual data and control commands which provides for the interconnection of digital audio and video equipment, using

37、 IEEE 1394. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEEE 212:2001,

38、 Standard for a Control and Status Registers (CSR) Architecture for microcomputer buses IEEE 1394:1995, Standard for a High Performance Serial Bus IEEE 1394a:2000, Standard for a High Performance Serial Bus Amendment 1 NOTE Throughout this document, the term “IEEE 1394” indicates a reference to the

39、standard that is the result of the editorial combination of IEEE 1394:1995 and IEEE 1394a:2000. Devices conforming solely to IEEE 1394:1995 may conform to IEC 61883. Devices conforming to IEC 61883 should conform to IEEE 1394a:2000. 3 Abbreviations For the purpose of this document, the following abb

40、reviations apply. AV/C Audio Video Control CHF CIP Header Field CIP Common Isochronous Packet CMP Connection Management Procedures CSR Command and Status Register CTS Command/Transaction Set CRC Cyclic Redundancy Check Code DVCR Digital Video Cassette Recorder EOH End of CIP Header FCP Function Cont

41、rol Protocol iPCR Input Plug Control Register iMPR Input Master Plug Register MPEG Motion Picture Experts Group oPCR Output Plug Control Register BS EN 61883-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 22/11/2011 07:52, Uncontrolled Copy, (c) BSI 8 61883-1 IEC:2008(E) oMPR Output Ma

42、ster Plug Register ROM Read Only Memory spd Speed Encoding xspd Extended Speed Encoding For clarity, field names are shown in italics in this standard. 4 High-performance serial bus layers 4.1 Cable physical layer All cable physical layer implementations conforming to this standard shall meet the pe

43、rformance criteria specified by IEEE 1394. Either the cable and connector defined in IEEE 1394:1995, or the cables and connector defined in IEEE 1394a:2000, shall be used. When necessary for an AV device to generate a bus reset, it shall follow the requirements of IEEE 1394a:2000, 8.2.1. An AV devic

44、e that initiates a bus reset should generate an arbitrated (short) bus reset, as specified by IEEE 1394a:2000, in preference to the long bus reset defined by IEEE 1394:1995. 4.2 Link layer All link layer implementations conforming to this standard shall meet the specifications of IEEE 1394. 4.3 Tran

45、saction layer All transaction layer implementations conforming to this standard shall meet the specifications of IEEE 1394. 5 Minimum node capabilities A node shall conform to the following requirements. A node shall be cycle master capable. This is because every node has the possibility to be assig

46、ned as a root. A node shall be isochronous resource manager capable, as specified by IEEE 1394:1995, and shall implement the additional isochronous resource manager facilities and responsibilities specified by IEEE 1394a:2000 in 8.3.1.5, 8.3.2.3.8, 8.3.2.3.11, 8.4.2.3 and 8.4.2.6A. A node which tran

47、smits or receives isochronous packets shall have plug control registers (see 7.2). 5.1 Serial bus management Bus manager capability is optional for AV devices, but, if implemented by devices conforming to this standard, shall conform to IEEE 1394. 5.2 Command and status registers 5.2.1 CSR core regi

48、sters This standard conforms to the CSR architecture. Details of its registers are specified by IEEE 1394. The STATE_CLEAR.cmstr bit shall be implemented as specified by IEEE 1394a:2000, 8.3.2.2.1. BS EN 61883-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 22/11/2011 07:52, Uncontrolle

49、d Copy, (c) BSI61883-1 IEC:2008(E) 9 NOTE The cmstr bit is set automatically (see IEEE 1394a:2000, 8.3.2.2.1) by system software or hardware when a node becomes the new root after the bus reset process is completed. In this manner, it is possible to ensure the fast resumption and continuity of data transmission where the time scale is critical at the level of microseconds. The rapid activation of a new cycle