BS EN 61935-2-20-2009 Testing of balanced communication cabling in accordance with series EN 50173 Patch cords and work area cords - Blank detail specification for class D applicat.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationTesting of balanced communication cabling in accordance with series EN 50173Part 2-20: Patch cords and work area cords Blank detail specification for class D applicationsBS EN 61

2、935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 61935-2-20:2009. Itwas derived by CENELEC from IEC 61935-2-20:2008.The CENELEC common modifications have been implemen

3、ted at the appropriate places in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted to Technical CommitteeEPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizations represente

4、d on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct applica-tion. BSI 2010 ISBN 978 0 580 57583 9 ICS 33.040.20; 33.120.20Compliance with a British Standard cannot

5、 confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2010.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE C

6、HINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61935-2-20 NORME EUROPENNE EUROPISCHE NORM December 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung C

7、entral Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61935-2-20:2009 E ICS 33.120.20 English version Testing of balanced communication cabling in accordance with series EN 50

8、173 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications (IEC 61935-2-20:2008, modified) Essais de cblage de tlcommunications symtrique selon la srie EN 50173 - Partie 2-20: Cordons de brassage et cordons de zones de travail - Spcification particulire ca

9、dre pour applications de classe D (CEI 61935-2-20:2008, modifie) Prfung der symmetrischen Kommunikationsverkabelung nach der Normenreihe EN 50173 - Teil 2-20: Rangierschnre und Gerteanschlussschnre - Vordruck fr Bauartspezifikation fr Anwendungen der Klasse D (IEC 61935-2-20:2008, modifiziert) This

10、European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer

11、ences concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC m

12、ember into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icela

13、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BS

14、IEN 61935-2-20:2009 - 2 - Foreword The text of document 46/270/FDIS, future edition 1 of IEC 61935-2-20, prepared by IEC TC 46, Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by CENELE

15、C as EN 61935-2-20 on 2008-06-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-07-01 latest date by which the national standards conflicting with the EN have to be wit

16、hdrawn (dow) 2011-06-01 Annex ZA has been added by CENELEC. _ BS EN 61935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BSI- 3 - EN 61935-2-20:2009 Endorsement notice The text of the International Standard IEC 61935-2-20:2008 was approved by

17、 CENELEC as a European Standard with agreed common modifications. BS EN 61935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BSIEN 61935-2-20:2009 - 4 - Annex ZA (normative) Normative references to international publications with their corres

18、ponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an intern

19、ational publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year Information technology - Generic cabling systems - Part 1: General requirements EN 50173-1 -1) Information technology - Generic cabling systems - Part 3: I

20、ndustrial premises EN 50173-3 -1) Communication cables - Specifications for test methods - Part 1-13: Electrical test methods - Coupling attenuation or screening attenuation of patch cords / coaxial cable assemblies / pre-connectorised cables EN 50289-1-13 -1)IEC 60603-7-2 -1)Connectors for electron

21、ic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz EN 60603-7-2 20092)IEC 60603-7-3 -1)Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connector

22、s, for data transmission with frequencies up to 100 MHz EN 60603-7-3 20092)IEC 60794-1-2 -1)Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures EN 60794-1-2 20032)IEC 61156-1 2007 Multicore and symmetrical pair/quad cables for digital communications - Part 1:

23、 Generic specification - - IEC 61156-6 2007 Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz -Work area wiring - Sectional specification - - IEC 61935-2 (mod) 2005 Testing of balanced commun

24、ication cabling in accordance with standards series EN 50173 - Part 2: Patch cords and work area cords EN 61935-2 + corr. December 2005 2005 1)Undated reference. 2)Valid edition at date of issue BS EN 61935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 23/07/2010 03:18, Uncontrolle

25、d Copy, (c) BSI- 5 - EN 61935-2-20:2009 Publication Year Title EN/HD Year IEC 62012-1 -1)Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification EN 62012-1 20022)BS EN 61935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE

26、CHINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BSI 2 CONTENTS 1 Scope.5 2 Normative references .5 3 Guidance for preparation of detail specifications 6 4 Blank detail specification for Work area cord for class D applications .8 Bibliography11 BS EN 61935-2-20:2009EN 61935-2-20:2009License

27、d Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BSI 5 TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH series EN 50173 Part 2-20: Patch cords and work area cords Blank detail specification for class D applications 1 Scope This blank detail specifi

28、cation describes work area cord for class D applications, as defined in EN 50173-1 as well as in the EN 50173-3 . This blank detail specification determines the layout and style for detail specifications describing cords with transmission characteristics up to 100 MHz for digital communications. Det

29、ail specifications, based on this blank detail specification, may be prepared by a national organization, a manufacturer, or a user. Test configuration applicable to cords is detailed in the IEC 61935-2. The designation “Category 5e“ is used herein to describe an enhanced category 5 cable (see 1 of

30、IEC 61156-6). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60603-7-

31、2, Connectors for electronic equipment Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz IEC 60603-7-3, Connectors for electronic equipment Part 7-3: Detail specification for 8-way, shielded, free and fixed connecto

32、rs, for data transmissions with frequencies up to 100 MHz IEC 60794-1-2, Optical fibre cables Part 1-2: Generic specification Basic optical cable test procedures IEC 61156-1:2007, Multicore and symmetrical pair/quad cables for digital communications Part 1: Generic specification IEC 61156-6:2007, Mu

33、lticore and symmetrical pair/quad cables for digital communications Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz Work area wiring Sectional specification IEC 61935-2:2005, Testing of balanced communication cabling in accordance with ISO/IEC 11801 Patch cords

34、 and work area cords IEC 62012-1, Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Part 1: Generic specifications BS EN 61935-2-20:2009 EN 50173-1, Information technology - Generic cabling systems Part 1: General requirements EN 50173-3, Informat

35、ion technology - Generic cabling systems Part 3: Industrial premises EN 61935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BSI 6 EN 50289-1-13, Electrical test methods Coupling attenuation or screening attenuation of patch cords / coaxial c

36、able assemblies / pre-connectorised cables13 Guidance for preparation of detail specifications It is necessary to keep the transmission characteristics indicated in the relevant sectional specification for the referenced category number, i.e. 5e and the characteristic impedance. The detail specifica

37、tion shall be written in accordance with the layout of the blank detail specification, which forms part of this standard. NOTE 1 When a characteristic does not apply, then “na” (for not applicable) should be entered in the appropriate space. NOTE 2 When a characteristic applies but a specific value

38、is not considered necessary, then “ns” (for not specified) should be entered in the appropriate space. When ns is used, the appropriate requirement in the sectional specification should apply. The numbers shown in brackets in this and the following pages correspond to the following items of required

39、 information, which should be entered in the spaces provided. 1 Name and address of the organization that has prepared the document. 2 IEC document number, issue number and date of issue. 3 Address of the organization from which the document is available. 4 Related documents. 5 Any other reference t

40、o the cable, national reference, trade name, etc. 6 A complete description of the cable which shall include a) type and number of elements; b) nominal impedance; c) screening; d) application; e) category; f) other distinguishing performance characteristics. Example: 4-pair, unshielded twisted pair c

41、able for use in work area wiring, having a nominal impedance of 100 , and meeting the transmission requirements of category 5e and the coupling attenuation requirements of type III. 7 Details of the cable material and construction. 8 Special requirements for bending radius or operating temperatures.

42、 9 List of cable characteristics. They are separated into electrical, transmission, mechanical and environmental characteristics. The recommended environmental severities are derived from the MICE table requirements of EN 50173-3 . These recommendations were made to better reflect the cable behaviou

43、r. It should be noted that ingress requirements using particles are not applicable to a cable. The temperature requirements are addressed in 8. Rapid change of temperature is irrelevant for cables. _ 1The EN 50289-1-13 will be replaced with equivalent IEC publication when available. BS EN 61935-2-20

44、:2009 EN 61935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BSI 7 Electromagnetic requirements coming from the MICE table of EN 50173-3 have been dealt with by using the requirements that are given for transfer impedance, screening attenuat

45、ion and coupling attenuation. ESD requirements are considered non-applicable 10 Appropriate subclause references in the generic specification IEC 61156-1/ 61935-2/ 62012-1/ 60794-1-2 and EN 50289-1-13. 11 Appropriate subclause references in the sectional specification IEC 61156-6/ 61935-2/ 62012-1 a

46、nd EN 50289-1-13. 12 Requirements applicable to this cable. The values shall meet the requirements of sectional specification IEC 61156-6 for category 5e. For those limits that are not related to the cable category and for which a choice is proposed, they have to be chosen to meet the related MICE t

47、able requirements 13 Comments Relevant remarks. BS EN 61935-2-20:2009 EN 61935-2-20:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 23/07/2010 03:18, Uncontrolled Copy, (c) BSI 8 4 Blank detail specification for Work area cord for class D applications 1 Prepared by: 2 Document: Issue: Dat

48、e: 3 Available from: 4 Sectional for the testing of cords: IEC 61935-2 Blank detail specification: IEC 61935-2-20 5 Additional references: EN 50173-1 6 Cord description: a) Category b) Nominal impedance c) Connector type d) Cable e) Screening f) Housing g) MICE 7 Cable assembly construction: IEC 611

49、56-1 IEC 61156-6 IEC 61935-2, 4.1 5.2.6 5.2.6 5.2.7.1 5.2.6 5.2.6 5.2.7 Sheath Material Nominal thicknessaColour Maximum overall Diameter Marking 2.2.13 2.2.13 Packaging: Visual inspection IEC 61935-2, 5.1 8 Minimum bending radius for static bending: mm Minimum bending radius for dynamic bending: mm Temperature range for installation C Operating temperature range unde