BS EN 61969-3-2012 Mechanical structures for electronic equipment Outdoor enclosures Environmental requirements tests and safety aspects《电子设备机械构造 室外外壳 环境要求 试验及安全性》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationMechanical structures for electronic equipment Outdoor enclosuresPart 3: Environmental requirements, tests and safety aspectsBS EN 61969-3:2012National forewordThis British Stand

2、ard is the UK implementation of EN 61969-3:2012. It isidentical to IEC 61969-3:2011. It supersedes BS EN 61969-3:2001 which iswithdrawn.The UK participation in its preparation was entrusted to Technical CommitteeEPL/48, Electromechanical components and mechanical structures for electronic equipment.

3、A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards

4、 Limited 2012ISBN 978 0 580 67587 4ICS 31.240Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 29 February 2012.Amendments issued since publicationAmd. No. Date Text

5、 affectedBRITISH STANDARDBS EN 61969-3:2012EUROPEAN STANDARD EN 61969-3 NORME EUROPENNE EUROPISCHE NORM February 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Av

6、enue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61969-3:2012 E ICS 31.240 Supersedes EN 61969-3:2001English version Mechanical structures for electronic equipment - Outdoor enclosures - Part

7、3: Environmental requirements, tests and safety aspects (IEC 61969-3:2011) Structures mcaniques pour quipement lectronique - Enveloppes de plein air - Partie 3: Exigences environnementales, essais et aspects de la scurit (CEI 61969-3:2011) Mechanische Bauweisen fr elektronische Einrichtungen - Aueng

8、ehuse - Teil 3: Umgebungsanforderungen, Prfungen und Sicherheitsaspekte (IEC 61969-3:2011) This European Standard was approved by CENELEC on 2011-12-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

9、status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, Fr

10、ench, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austri

11、a, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Un

12、ited Kingdom. BS EN 61969-3:2012EN 61969-3:2012 - 2 - Foreword The text of document 48D/483/FDIS, future edition 2 of IEC 61969-3, prepared by SC 48D, “Mechanical structures for electronic equipment“, of IEC/TC 48, “Electromechanical components and mechanical structures for electronic equipment“ was

13、 submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61969-3:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-09-22 latest date by which th

14、e national standards conflicting with the document have to be withdrawn (dow) 2014-12-22 This document supersedes EN 61969-3:2001. EN 61969-3:2012 includes the following significant technical changes with respect to EN 61969-3:2001: Table 1 and Table 6 have been extended with requirements and tests,

15、 relevant for outdoor conditions. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Sta

16、ndard IEC 61969-3:2011 was approved by CENELEC as a European Standard without any modification. BS EN 61969-3:2012- 3 - EN 61969-3:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part,

17、 are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modi

18、fied by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068 Series Environmental testing EN 60068Series IEC 60417 Data-base Graphical symbols for use on equipment - - IEC 60529 - Degrees of protection provided by enclosures (IP Code) - -

19、IEC 60695-11-10 - Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods EN 60695-11-10 - IEC 60721-3-2 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportatio

20、n EN 60721-3-2 - IEC 60721-3-4 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations EN 60721-3-4 - IEC 60825-1 - Safety of laser products - Part 1: Equipment clas

21、sification and requirements EN 60825-1 - IEC 60950 Series Information technology equipment - Safety EN 60950 Series IEC 61010 - Safety requirements for electrical equipment for measurement, control and laboratory use EN 61010 - IEC 61140 - Protection against electric shock - Common aspects for insta

22、llation and equipment EN 61140 - IEC 61439-5 - Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks EN 61439-5 - IEC 61587-1 - Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical

23、 tests and safety aspects for cabinets, racks, subracks and chassis EN 61587-1 - IEC 61587-2 - Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks EN 61587-2 - BS EN 61969-3:2012EN 61969-3:2012 - 4 - Publication Year Title

24、 EN/HD Year IEC 61587-3 - Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks EN 61587-3 - IEC 62194 - Method of evaluating the thermal performance of enclosures EN 62194 - IEC 62262

25、 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) EN 62262 - IEC 62305-4 - Protection against lightning - Part 4: Electrical and electronic systems within structures EN 62305-4 - ISO 2533 - Standard atmosphere - - ISO 3744 - Acoust

26、ics - Determination of sound power levels of noise sources using sound pressure -Engineering method in an essentially free field over a reflecting plane EN ISO 3744 - ISO 3864 - Safety colours and safety signs - - ISO 4892-2 - Plastics - Methods of exposure to laboratory light sources - Part 2: Xeno

27、n-arc lamps EN ISO 4892-2 - ETSI EN 300019-2-2 - Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2: Specification of environmental tests -Transportation - - BS EN 61969-3:2012 2 61969-3 IEC:2011 CONTENTS INTRODUCTION . 5 1 Scope

28、 . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Classification of environmental conditions 7 5 Test conditions . 8 5.1 General . 8 5.2 Climatic tests 8 5.3 Biological tests 8 5.4 Tests of resistance against chemically active substances 9 5.5 Tests of resistance against mechanically act

29、ive substances 9 6 Mechanical tests. 9 6.1 General . 9 6.2 Dynamic test . 10 6.3 Lifting and stiffness test 10 7 Safety aspects 11 7.1 General . 11 7.2 Locking devices . 11 7.3 Vandalism resistance 11 7.4 Bullet resistance (optional) 12 8 Seismic requirements . 12 9 Electromagnetic shielding perform

30、ance 12 10 Thermal management . 12 11 Noise emission . 12 Table 1 Climatic conditions for environmental classes 1 and 2 . 8 Table 2 Biological tests 8 Table 3 Tests of resistance against chemically active substances 9 Table 4 Tests of resistance against mechanically active substances 9 Table 5 Vibra

31、tion and shock test 10 Table 6 Safety aspects 11 BS EN 61969-3:201261969-3 IEC:2011 5 INTRODUCTION IEC 61969-3 Ed.2.0 provides basic environmental test requirements to be used in the absence of local regulatory or application specific environmental test requirements. This provides manufacturers and

32、users of generic outdoor enclosure solutions with minimum performance compliance criteria; thermal solutions pending on the environment an outdoor enclosure is subjected to. Since forced air heat dissipation and acoustic noise are closely related, noise limitations are typically defined by local reg

33、ulatory limitations. Typically, it becomes the responsibility of the outdoor enclosure vendor to provide a solution for thermal management within the local regulatory noise limitations. BS EN 61969-3:2012 6 61969-3 IEC:2011 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT OUTDOOR ENCLOSURES Part 3: En

34、vironmental requirements, tests and safety aspects 1 Scope This part of IEC 61969 specifies a set of basic environmental requirements and tests, as well as safety aspects for outdoor enclosures under conditions of non-weatherprotected locations above ground. The purpose of this standard is to define

35、 a minimum level of environmental performance in order to meet requirements of storage, transport and final installation. It is the intention to establish basic environmental performance criteria for outdoor enclosure compliance. 2 Normative references The following referenced documents are indispen

36、sable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068 (all parts), Environmental testing IEC 60417, Graphical symbols for use on equipment I

37、EC 60529, Degrees of protection provided by enclosures (IP code) IEC 60695-11-10, Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame test methods IEC 60721-3-2, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and the

38、ir severities Section 2: Transportation IEC 60721-3-4, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 4: Stationary use at non-weather-protected locations IEC 60825-1, Safety of laser products Part 1: Equipment spe

39、cification and requirements IEC 60950 (all parts), Information technology equipment Safety IEC 61010, Safety requirements for electrical equipment for measurement, control, and laboratory use IEC 61140 Protection against electric shock - Common aspects for installation and equipment IEC 61439-5, Low

40、-voltage switchgear and control gear assemblies Part 5: Assemblies for power distribution in public networks IEC 61587-1, Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 1, Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis B

41、S EN 61969-3:201261969-3 IEC:2011 7 IEC 61587-2, Mechanical structures for electronic equipment Tests for IEC 60917 and 60297 Part 2: Seismic tests for cabinets and racks IEC 61587-3, Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 3: Electromagnetic shielding p

42、erformance tests for cabinets, racks and subracks IEC 62194, Methods of evaluating the thermal performance of enclosures IEC 62262, Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) IEC 62305-4, Protection against lightning Part 4: El

43、ectrical and electronic systems within structures ISO 2533, Standard atmosphere ISO 3744, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engeneering methods for an essentially free field over a reflecting plane ISO 3864, Graphical symbols

44、Safety colours and safety signs ISO 4892-2, Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps ETSI EN 300019-2-2, Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental test

45、s; Transportation 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 outdoor enclosure enclosure exposed to the outdoor environment, for stationary use at non-weatherprotected locations, for the protection of electronic equipment installed insid

46、e against outdoor environmental conditions 3.2 non-weatherprotected location place with direct weather influence 4 Classification of environmental conditions The environmental conditions are derived from IEC 60721-3-4, with the focus on empty outdoor enclosures relevant requirements. Class 1: Non-we

47、atherprotected location: Covers all regions with a moderate climate. Class 2: Non-weatherprotected locations, extended: Covers all regions with severe climate. BS EN 61969-3:2012 8 61969-3 IEC:2011 The individual outdoor enclosure product solution tested to these basic environmental test requirement

48、s my claim compliance to either Class 1 or Class 2 or a combination of Class1/Class2. 5 Test conditions 5.1 General The basic test conditions shown in Table 1; Table 2; Table 3 and Table 4 reflect typical outdoor enclosure environments to be endured. 5.2 Climatic tests Table 1 Climatic conditions fo

49、r environmental classes 1 and 2 Environmental parameters Test severity Duration IEC method Class 1 Class 2 a Low air temperature -45 C -65 C 16 h 60068-2-1; A b High air temperature 80 C 90 C 16 h 60068-2-2: B c Damp heat 30 C, 93 % 30 C, 93 % 96 h 60068-2-78: Cb d Rate of change of temperature -50 C to + 23 C 1 C/min -50 C to + 23 C 1 C/min 2 cycles 60068-2-14: Nb e Solar radiation 1 120 W/m21 120 W/m272 h/ 40 C 60068-2-5 Sa f Condensation 40 C 90