1、BRITISH STANDARDBS EN 61988-3-1:2005Plasma display panels Part 3-1: Mechanical interfaceThe European Standard EN 61988-3-1:2005 has the status of a British StandardICS 31.260g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g
2、51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSIBS EN 61988-3-1:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 April 2006 B
3、SI 2006ISBN 0 580 48195 6National forewordThis British Standard is the official English language version of EN 61988-3-1:2005. It is identical with IEC 61988-3-1:2005.The UK participation in its preparation was entrusted to Technical Committee EPL/47, Semiconductors, which has the responsibility to:
4、 A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Sta
5、ndards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standar
6、d does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European deve
7、lopments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 13 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAm
8、d. No. Date CommentsLicensed Copy: Wang Bin, na, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61988-3-1 NORME EUROPENNE EUROPISCHE NORM November 2005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europi
9、sches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61988-3-1:2005 E ICS 31.260 English version Plasma display panels Part 3-1:
10、 Mechanical interface (IEC 61988-3-1:2005) Panneaux daffichage plasma Partie 3-1: Interface mcanique (CEI 61988-3-1:2005) Plasmabildschirme Teil 3-1: Mechanische Schnittstelle (IEC 61988-3-1:2005) This European Standard was approved by CENELEC on 2005-11-01. CENELEC members are bound to comply with
11、the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat
12、 or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the off
13、icial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slove
14、nia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSIForeword The text of document 110/62/FDIS, future edition 1 of IEC 61988-3-1, prepared by IEC TC 110, Flat panel display devices, was submitted to the IEC-CENELEC
15、parallel vote and was approved by CENELEC as EN 61988-3-1 on 2005-11-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-08-01 latest date by which the national standards
16、 conflicting with the EN have to be withdrawn (dow) 2008-11-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61988-3-1:2005 was approved by CENELEC as a European Standard without any modification. _ EN 61988-3-1:2005 2 Licensed Copy: Wang Bin, na
17、, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSICONTENTS 1 Scope 4 2 Normative references .4 3 Terms and definitions .4 4 General requirements .5 5 Mechanical drawings 5 5.1 General .5 5.2 Assembled view and exploded view .5 5.3 Front view and side view8 5.4 Rear view9 5.5 Height map11 5.6
18、 Total list of parameters and dimensions .11 Figure 1 Assembled view of an example PDP module .6 Figure 2 Exploded view of an example PDP module7 Figure 3 Front view and side view of the PDP module including flex cables .8 Figure 4 Rear view of the PDP module including flex cables .10 Figure 5 Heigh
19、t map (rear view and side view)11 Table 1 List of parameters defined in the front view and side view (Figure 3).9 Table 2 List of parameters defined in the rear view (Figure 4) .10 Table 3 List of parameters defined in the height map (Figure 5) 11 Table 4 Total list of parameters and dimensions of t
20、he PDP module12 EN 61988-3-1:2005 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications 13 Licensed Copy: Wang Bin, na, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSIPLASMA DISPLAY PANELS Part 3-1: Mechanical interface 1 Sc
21、ope This part of IEC 61988 defines drawings and required dimensions of plasma display (PDP) modules, PDP components, PDP sub-assemblies and ancillary components. This standard serves as a basis to establish a set of PDP modules with a standard description of dimensions. 2 Normative references The fo
22、llowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61988-1, Plasma display panels Part 1: Terminology
23、and letter symbols3 Terms and definitions For the purposes of this document, the following terms and definitions apply in addition to those defined in IEC 61988-1. NOTE For easy recognition, the terms as shown below will be capitalized in the text. 3.1 clearance outline three-dimensional surface, co
24、ntaining all the elements of a module, including additional clearance recommended by the module maker 3.2 module chassis mechanical base of a module, on which a panel, drive electronics, other electronic units and mounting mechanisms for a set are mounted NOTE Usually the Module Chassis is used as t
25、he set chassis by mounting front and rear cabinets, a front optical filter and other components on it. 3.3 module outline three-dimensional surface, containing all the elements of a module, without additional clearance 3.4 mounting point any position used for mounting the set chassis, frame or cabin
26、et EN 61988-3-1:2005 4 Licensed Copy: Wang Bin, na, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSI3.5 screen centre centre point of the screen on the front surface of a panel 3.6 screen diagonal diagonal of the screen area 3.7 zero point centre of the X-Y-Z coordinate system of the module
27、NOTE It is chosen to coincide with the Screen Centre. 4 General requirements This standard prescribes the front, rear and side views and the typical diagrammatic drawings required for documenting a generic PDP design. Specimen drawings are shown in Figures 1, 2, 3, 4 and 5. The recommendations for v
28、alues to be included in each drawing are specified in Table 4. 5 Mechanical drawings 5.1 General Figures 1 and 2 show the different elements of an example PDP module. Figure 3 shows the front view and side view. Figure 4 shows the rear view; included are the relevant dimensions, Mounting Points Mi,
29、connector positions Ciand special points Pion the module and the Clearance Outline. The choice of the coordinate system is such that the X-Y-Z reference point in the drawings is identical to the Screen Centre. The number of Mounting Points as well as the number of connector points can be variable. T
30、he different Z dimensions of the module are given in the form of a height map, as shown in Figure 5. The directions of X-, Y- and Z-axes are as shown in Figure 3. The positive X direction is towards the left-side in the front view (to the right side in rear view); the positive Y and Z are upward and
31、 front-to-rear direction respectively. All the dimensions shown in these figures and tables shall be defined and/or measured at the standard environmental conditions; temperature of 25 C 3 C, humidity of 25 % RH to 85 % RH, and pressure of 86 kPa to 106 kPa. When different conditions are chosen, the
32、se shall be noted on the report. 5.2 Assembled view and exploded view Figure 1 and Figure 2 show an example plasma display (PDP) module. A PDP module is made of a panel, a Module Chassis, sustain units, address (data) units, scan units, a power supply unit, a control unit, etc. The panel is mounted
33、on the front side of the chassis, usually by using adhesive layers. The scan units are electrically connected to a vertical edge of the panel by using FPC (flexible printed circuit), while a sustain unit is connected to another vertical edge of the panel. Another sustain unit is electrically connect
34、ed to the panel through the scan units. The address (data) units are connected to a horizontal edge of the panel also by using FPC. Electric circuits (the sustain units, the power supply, the control unit, etc.) are mounted on the rear side of the chassis. The brackets are used to mount the module t
35、o a set. EN 61988-3-1:2005 5 Licensed Copy: Wang Bin, na, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSIFigures 1 and 2 may be included in each specification to help understanding each module design. Figure 1 Assembled view of an example PDP module PanelBrackets Control unitFPC (flexible p
36、rinted circuit) Sustain units Scan unit Address (data) unit Module chassisPower supply unit (PSU) IEC 1802/05 EN 61988-3-1:2005 6 Licensed Copy: Wang Bin, na, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSIFigure 2 Exploded view of an example PDP module Power supply unit (PSU) Panel Bracket
37、s Control unit FPC (flexible printed circuit) Sustain units Scan unit Address (data) unit Module chassis Adhesive layer IEC 1803/05 EN 61988-3-1:2005 7 Licensed Copy: Wang Bin, na, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSI5.3 Front view and side view Figure 3 shows examples of a front
38、 view and a side view. This figure shall show the screen dimensions and the total dimensions of the module, where D, H and V are the Screen Diagonal, the screen width and the screen height respectively, and Xt, Ytand Zt are the total dimensions (including flex cables) of width, height and thickness,
39、 respectively. The centre point of the screen on the front surface of the panel (Screen Centre) shall be defined as the Zero Point (see Definition 3.7). Xmdl,pos, Xmdl,neg, Ymdl,posand Ymdl,neg, which are the outline dimensions of the module from Screen Centre, shall also be shown. Positions Pifor s
40、pecial points on the module can be shown in this figure. Positions P1and P2are examples of special points on the Module Outline. Each special point Pishould not be shown both on front and rear views. The directions of X-, Y- and Z-axis are as shown in Figure 3. The positive X direction is towards th
41、e left-side in the front view (to the right side in rear view); the positive Y and Z are upward and front-to-rear direction, respectively. Table 1 defines the parameters shown in Figure 3. Figure 3 Front view and side view of the PDP module including flex cables Xmdl,negYmdl,posH Ymdl,negPositive Y-
42、axis Positive X-axis Screen centre D Xmdl,posP1(XP1YP1) P2(XP2YP2) YtXtZtPositive Z-axis V Positive Y-axis Screen Centre on the front surface of the panel IEC 1804/05 EN 61988-3-1:2005 8 Licensed Copy: Wang Bin, na, Wed Jul 19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSITable 1 List of parameters d
43、efined in the front view and side view (Figure 3) Symbol Definition V Screen height H Screen width D Screen diagonal XtTotal width of a module including flex cables YtTotal height of a module including flex cables ZtTotal thickness of a module including flex cables Xmdl,posDistance between positive
44、X-side of Module Outline and Screen Centre Xmdl,negDistance between negative X-side of Module Outline and Screen Centre Ymdl,posDistance between positive Y-side of Module Outline and Screen Centre Ymdl,negDistance between negative Y-side of Module Outline and Screen Centre PiSpecial point (i) XPiX-c
45、oordinate of a special point PiYPiY-coordinate of a special point Pi5.4 Rear view Figure 4 shows an example of a rear view including Clearance Outline. The Clearance Outline (see Definition 3.1) is indicated by a dotted line. This figure shall include all of the dimensions of the Clearance Outline.
46、Xclear and Yclearare the horizontal clearance and vertical clearance of the module respectively; Xclear,posand Yclear,pos are the distances in the positive X and Y directions between the Screen Centre and the Clearance Outline of the module. The positions of the connectors Ciand the Mounting Points
47、Mishall also be shown in this figure. Positions Pifor special points on the module can also be shown in this figure. Each special point Pi should not be shown both on the front and rear views. Table 2 defines the parameters shown in Figure 4. EN 61988-3-1:2005 9 Licensed Copy: Wang Bin, na, Wed Jul
48、19 08:22:48 BST 2006, Uncontrolled Copy, (c) BSIFigure 4 Rear view of the PDP module including flex cables Table 2 List of parameters defined in the rear view (Figure 4) Symbol Definition XclearHorizontal clearance YclearVertical clearance Xclear,posDistance between positive X-side of Clearance Outl
49、ine and Screen Centre Yclear,posDistance between positive Y-side of Clearance Outline and Screen Centre CiPosition of connector (i) XCiX-coordinate of connector position CiYCiY-coordinate of connector position CiMiMounting Point (i) XMiX-coordinate of Mounting Point MiYMiY-coordinate of Mounting Point MiPiSpecial point (i) XPiX-coordinate of special point PiYPiY-coordinate of special point PiXclear,posYclear,posC1(XC1 YC1) C2(XC2YC2) C3(XC3YC3) Y X Screen centre C4(XC4YC4) M1(XM1 YM1)M2(
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1