1、Electricity metering data exchange The DLMS/COSEM suitePart 6-1: Object Identification System (OBIS)BS EN 62056-6-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62056-6-1:2016. It isidentica
2、l to IEC 62056-6-1:2015. It supersedes BS EN 62056-6-1:2013 whichis withdrawn. The UK participation in its preparation was entrusted to TechnicalCommittee PEL/13, Electricity Meters.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does
3、 not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 86670 8ICS 17.220.01; 35.110; 91.140.50Compliance with a British Standard cannot confer i
4、mmunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62056-6-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NOR
5、M EN 62056-6-1 December 2016 ICS 17.220; 35.110; 91.140.50 Supersedes EN 62056-6-1:2013 English Version Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) (IEC 62056-6-1:2015) Echange des donnes de comptage de llectricit - La suite DLMS/COSEM -
6、Partie 6-1: Systme didentification des objets (OBIS) (IEC 62056-6-1:2015) Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 6-1: COSEM Object Identification System (OBIS) (IEC 62056-6-1:2015) This European Standard was approved by CENELEC on 2015-12-24. CENELEC members are bound
7、 to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN
8、-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management C
9、entre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, I
10、taly, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee f
11、r Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62056-6-1:2016 E BS EN 62056-6-1:2016EN 62056-6-1:2016 2 European foreword The text of
12、 document 13/1649/FDIS, future edition 2 of IEC 62056-6-1, prepared by IEC/TC 13 “Electrical energy measurement, tariff- and load control“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62056-6-1:2016. The following dates are fixed: latest date by which the document has
13、 to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-06-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-12-09 This document supersedes EN 62056-6-1:2013. Attention is drawn to t
14、he possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62056-6-1:2015 was approved by CENELEC as a Eur
15、opean Standard without any modification. BS EN 62056-6-1:2016EN 62056-6-1:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are in
16、dispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the
17、 relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year Communication system for meters and remote reading of meters - Part 1: Data exchange EN 13757-1 2002 IEC 6
18、2053-23 2003 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) EN 62053-23 2003 IEC 62056-6-2 - Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes EN 62056-6-2 - IEC 62056-21 2002
19、Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange EN 62056-21 2002 IEC/TR 61000-2-8 2002 Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with
20、 statistical measurement results - - IEC/TR 62051 1999 Electricity metering - Glossary of terms - - IEC/TR 62051-1 2004 Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSE
21、M - - BS EN 62056-6-1:2016 2 IEC 62056-6-1:2015 IEC 2015 CONTENTS FOREWORD. 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms, definitions and abbreviations 9 4 OBIS code structure 9 4.1 Value groups and their use 9 4.2 Manufacturer specific codes 10 4.3 Reserved ranges . 10 4.4 Summary
22、of rules for manufacturer, utility, consortia and country specific codes 10 4.5 Standard object codes . 11 5 Value group definitions overview . 11 5.1 Value group A . 11 5.2 Value group B . 12 5.3 Value group C . 12 5.3.1 General . 12 5.3.2 Abstract objects . 13 5.4 Value group D . 13 5.4.1 General
23、. 13 5.4.2 Consortia specific identifiers . 13 5.4.3 Country specific identifiers . 14 5.4.4 Identification of general and service entry objects . 15 5.5 Value group E . 15 5.6 Value group F . 15 5.6.1 General . 15 5.6.2 Identification of billing periods 16 6 Abstract objects (Value group A = 0) 16
24、6.1 General and service entry objects Abstract . 16 6.2 Error registers, alarm registers / filters / descriptor objects Abstract 20 6.3 List objects Abstract . 20 6.4 Register table objects Abstract . 20 6.5 Data profile objects Abstract . 21 7 Electricity (Value group A = 1) 21 7.1 Value group C co
25、des Electricity (see Table 12 and Figure 2) . 21 7.2 Value group D codes Electricity 23 7.2.1 Processing of measurement values (see Table 13) . 23 7.2.2 Use of value group D for identification of other objects 25 7.3 Value group E codes Electricity 25 7.3.1 General . 25 7.3.2 Tariff rates . 25 7.3.3
26、 Harmonics . 26 7.3.4 Phase angles . 26 7.3.5 Transformer and line loss quantities . 27 7.3.6 UNIPEDE voltage dips . 30 7.3.7 Use of value group E for the identification of other objects 30 BS EN 62056-6-1:2016IEC 62056-6-1:2015 IEC 2015 3 7.4 Value group F codes Electricity 30 7.4.1 Billing periods
27、 30 7.4.2 Multiple thresholds . 31 7.5 OBIS codes Electricity 31 7.5.1 General and service entry objects Electricity 31 7.5.2 Error register objects Electricity . 34 7.5.3 List objects Electricity 35 7.5.4 Data profile objects Electricity . 35 7.5.5 Register table objects Electricity 35 8 Other medi
28、a (Value group A= 15) . 36 8.1 General . 36 8.2 Value group C codes Other media 36 8.3 Value group D codes Other media 36 8.4 Value group E codes Other media 36 8.5 Value group F codes Other media . 36 Annex A (normative) Code presentation . 37 A.1 Reduced ID codes (e.g. for IEC 62056-21) . 37 A.2 D
29、isplay . 37 A.3 Special handling of value group F 37 A.4 COSEM 38 Annex B (informative) Significant technical changes with respect to IEC 62056-6-1:2013 39 Bibliography . 40 Index 41 Figure 1 OBIS code structure and use of value groups 10 Figure 2 Quadrant definitions for active and reactive power 2
30、3 Figure 3 Model of the line and the transformer for calculation of loss quantities . 27 Figure A.1 Reduced ID code presentation . 37 Table 1 Rules for manufacturer, utility, consortia and country specific codes . 11 Table 2 Value group A codes . 12 Table 3 Value group B codes . 12 Table 4 Value gro
31、up C codes Abstract objects . 13 Table 5 Value group D codes Consortia specific identifiers 13 Table 6 Value group D codes Country specific identifiers . 14 Table 7 OBIS codes for general and service entry objects . 16 Table 8 OBIS codes for error registers, alarm registers and alarm filters Abstrac
32、t . 20 Table 9 OBIS codes for list objects Abstract 20 Table 10 OBIS codes for register table objects Abstract . 20 Table 11 OBIS codes for data profile objects Abstract 21 Table 12 Value group C codes Electricity . 21 Table 13 Value group D codes Electricity . 23 Table 14 Value group E codes Electr
33、icity Tariff rates 26 Table 15 Value group E codes Electricity Harmonics . 26 Table 16 Value group E codes Electricity Extended phase angle measurement 27 BS EN 62056-6-1:2016 4 IEC 62056-6-1:2015 IEC 2015 Table 17 Value group E codes Electricity Transformer and line losses . 28 Table 18 Value group
34、 E codes Electricity UNIPEDE voltage dips . 30 Table 19 OBIS codes for general and service entry objects Electricity 31 Table 20 OBIS codes for error register objects Electricity . 34 Table 21 OBIS codes for list objects Electricity 35 Table 22 OBIS codes for data profile objects Electricity . 35 Ta
35、ble 23 OBIS codes for register table objects Electricity . 35 Table 24 Value group C codes Other media . 36 Table A.1 Example of display code replacement . 37 Table A.2 Value group F Billing periods . 38 BS EN 62056-6-1:2016IEC 62056-6-1:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ EL
36、ECTRICITY METERING DATA EXCHANGE THE DLMS/COSEM SUITE Part 6-1: Object Identification System (OBIS) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The objec
37、t of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specification
38、s (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaisin
39、g with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express,
40、as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees
41、in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Com
42、mittees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not pro
43、vide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the la
44、test edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, wh
45、ether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
46、indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The International Electrotec
47、hnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this International Standard may involve the use of a maintenance service concerning the stack of protocols on which the present standard IEC 62056-6-1 is based. The IEC takes no position concerning the eviden
48、ce, validity and scope of this maintenance service. The provider of the maintenance service has assured the IEC that he is willing to provide services under reasonable and non-discriminatory terms and conditions for applicants throughout the world. In this respect, the statement of the provider of t
49、he maintenance service is registered with the IEC. Information may be obtained from: DLMS User Association Zug/Switzerland International Standard IEC 62056-6-1 has been prepared by IEC technical committee 13: Electrical energy measurement and control. BS EN 62056-6-1:2016 6 IEC 62056-6-1:2015 IEC 2015 This second edition cancels and replaces the
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1