BS EN 62056-6-2-2013 Electricity metering data exchange The DLMS COSEM suite COSEM interface classes《电量测量数据交换 DLMS COSEM套件 COSEM接口类》.pdf

1、BSI Standards PublicationElectricity metering data exchange TheDLMS/COSEM suitePart 6-2: COSEM interface classesBS EN 62056-6-2:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted withou

2、t license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62056-6-2:2013. It isidentical to IEC 62056-6-2:2013. It supersedes BS EN 62056-62:2007 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/13, Electricity Meter

3、s.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standa

4、rds Limited 2013ISBN 978 0 580 73950 7ICS 17.220.01; 35.110; 91.140.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2013.Amendments/corrigenda issue

5、d since publicationDate Text affectedBRITISH STANDARDBS EN 62056-6-2:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62056-6-2 NORME

6、 EUROPENNE EUROPISCHE NORM August 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of expl

7、oitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62056-6-2:2013 E ICS 17.220; 35.110; 91.140.50 Supersedes EN 62056-62:2007 English version Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes (IEC 62056-6-2:2013) Echa

8、nge de donnes dans les quipements de comptage de lnergie lectrique - La suite DLMS/COSEM - Partie 6-2: Classes dinterfaces COSEM (CEI 62056-6-2:2013) Datenkommunikation der elektrischen Energiemesseung - DLMS/COSEM - Teil 6-2: Interface-Klassen (IEC 62056-6-2:2013) This European Standard was approve

9、d by CENELEC on 2013-07-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa

10、l standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own

11、language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

12、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62056-6-2:2013Copyright European Committee for Electrotechnical St

13、andardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62056-6-2:2013 - 2 - Foreword The text of document 13/1525/FDIS, future edition 1 of IEC 62056-6-2, prepared by IEC/TC 13 “Electrical energy measurement, tari

14、ff- and load control“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62056-6-2:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-04

15、-04 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-07-04 EN 62056-6-2:2013 cancels and replaces EN 62056-62 published in 2007. It constitutes a technical revision. The significant technical changes with respect to EN 62056-62 are listed in A

16、nnex A. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62056-6-2:2013 w

17、as approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61334-6:2000 NOTE Harmonized as EN 61334-6:2000 (not modified). IEC 62053-23:2003 IEC 62056-8-3:2013 NOTE Harmonize

18、d as EN 62053-23:2003 (not modified). NOTE Harmonized as EN 62056-8-3:2013 (not modified). BS EN 62056-6-2:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-

19、,- 3 - EN 62056-6-2:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, o

20、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year

21、 IEC 61334-4-32 1996 Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 32: Data link layer - Logical link control (LLC) EN 61334-4-32 1996 IEC 61334-4-41 1996 Distribution automation using distribution line carrier systems - Part 4: Data

22、 communication protocols - Section 41: Application protocols - Distribution line message specification EN 61334-4-41 1996 IEC 61334-4-511 2000 Distribution automation using distribution line carrier systems - Part 4-511: Data communication protocols - Systems management - CIASE protocol EN 61334-4-5

23、11 2000 IEC 61334-4-512 2001 Distribution automation using distribution line carrier systems - Part 4-512: Data communication protocols - System management using profile 61334-5-1 - Management Information Base (MIB) EN 61334-4-512 2002 IEC 61334-5-1 2001 Distribution automation using distribution li

24、ne carrier systems - Part 5-1: Lower layer profiles - The spread frequency shift keying (S-FSK) profile EN 61334-5-1 2001 IEC/TR 62051 1999 Electricity metering - Glossary of terms - - IEC/TR 62051-1 + corr. June 2004 2005 Electricity metering - Data exchange for meter reading, tariff and load contr

25、ol - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM - - IEC 62056-3-1 201X1Electricity metering data exchange The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling EN 62056-3-1 201X2IEC 62056-5-3 2013

26、Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer EN 62056-5-3 2013 1To be published. 2At draft stage. BS EN 62056-6-2:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo rep

27、roduction or networking permitted without license from IHS-,-,-EN 62056-6-2:2013 - 4 - IEC 62056-6-1 2013 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: COSEM Object Identification System (OBIS) EN 62056-6-1 2013 IEC 62056-21 2002 Electricity metering - Data exchange for meter

28、 reading, tariff and load control - Part 21: Direct local data exchange EN 62056-21 2002 IEC 62056-46 +A1 2002 2006 Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol EN 62056-46 2002 ISO/IEC 8802-2 + corr. October 1998 2000

29、 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 2: Logical link control - - ISO/IEC/IEEE 60559 2011 Information technology - Microprocessor Systems - Floating-Point arithmetic - - EN 13757-2 2

30、004 Communication systems for and remote reading of meters - Part 2: Physical and link layer - - EN 13757-3 2004 Communication systems for and remote reading of meters - Part 3: Dedicated application layer - - EN 13757-5 2008 Communication systems for meters and remote reading of meters - Part 5: Wi

31、reless relaying - - ANSI C12.19:1997/IEEE 1377 1997 Utility Industry End Device Data Tables - - IETF RFC 1332 1992 The PPP Internet Protocol Control Protocol (IPCP) - - IETF RFC 1570 1994 PPP LCP Extensions - - IETF RFC 1661 1994 Point-to-Point Protocol (PPP) - - IETF RFC 1662 1994 PPP in HDLC Frami

32、ng - - IETF RFC 1700 1994 Assigned Numbers request for comments 1700 (STD 2) - - IETF RFC 2507 1999 IP Header Compression - - IETF RFC 3241 2002 Robust Header Compression (ROHC) over PPP - - STD 0005 1981 Internet Protocol - - STD 0051 1994 The Point-to-Point Protocol (PPP) - - BS EN 62056-6-2:2013C

33、opyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 62056-6-2 IEC:2013 CONTENTS INTRODUCTION . 9 1 Scope 10 2 Normative references . 10 3 Abbreviations . 12 4

34、Basic principles 14 General . 14 4.1Referencing methods . 15 4.2Reserved base_names for special COSEM objects . 15 4.3Class description notation 15 4.4Common data types . 18 4.5Data formats 19 4.6Date and time formats 19 4.6.1Floating point number formats 21 4.6.2The COSEM server model . 23 4.7The C

35、OSEM logical device 24 4.8General . 24 4.8.1COSEM logical device name 24 4.8.2The “association view” of the logical device 24 4.8.3Mandatory contents of a COSEM logical device 24 4.8.4Management logical device 25 4.8.5Data security . 25 4.95 The COSEM interface classes 25 Overview . 25 5.1Interface

36、classes for parameters and measurement data 27 5.2Data (class_id: 1, version: 0) 27 5.2.1Register (class_id: 3, version: 0) 28 5.2.2Extended register (class_id: 4, version: 0) 32 5.2.3Demand register (class_id: 5, version: 0) 33 5.2.4Register activation (class_id: 6, version: 0) . 36 5.2.5Profile ge

37、neric (class_id: 7, version: 1) . 38 5.2.6Utility tables (class_id: 26, version: 0) 43 5.2.7Register table (class_id: 61, version: 0) 44 5.2.8Status mapping (class_id: 63, version: 0) 47 5.2.9Interface classes for access control and management 48 5.3Association SN (class_id: 12, version: 2) 48 5.3.1

38、Association LN (class_id: 15, version: 1) 52 5.3.2SAP assignment (class_id: 17, version: 0) 58 5.3.3Image transfer (class_id: 18, version: 0) . 59 5.3.4Security setup (class_id: 64, version: 0) . 67 5.3.5Interface classes for time- and event bound control 68 5.4Clock (class_id: 8, version: 0) 68 5.4

39、.1Script table (class_id: 9, version: 0) 71 5.4.2Schedule (class_id: 10, version: 0) . 72 5.4.3Special days table (class_id: 11, version: 0) . 75 5.4.4Activity calendar (class_id: 20, version: 0) 76 5.4.5BS EN 62056-6-2:2013Copyright European Committee for Electrotechnical Standardization Provided b

40、y IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62056-6-2 IEC:2013 3 Register monitor (class_id: 21, version: 0) 79 5.4.6Single action schedule (class_id: 22, version: 0) . 80 5.4.7Disconnect control (class_id: 70, version: 0) . 81 5

41、.4.8Limiter (class_id: 71, version: 0) . 84 5.4.9Sensor manager interface class (class_id:67, version: 0) 86 5.4.10Interface classes for setting up data exchange via local ports and modems . 90 5.5IEC local port setup (class_id: 19, version: 1) . 90 5.5.1IEC HDLC setup (class_id: 23, version: 1) 92

42、5.5.2IEC twisted pair (1) setup (class_id: 24, version: 0) . 94 5.5.3Modem configuration (class_id: 27, version: 1) . 95 5.5.4Auto answer (class_id: 28, version: 0) 96 5.5.5Auto connect (class_id: 29, version: 1) . 98 5.5.6Interface classes for setting up data exchange via M-Bus . 99 5.6M-Bus slave

43、port setup (class_id: 25, version: 0) 99 5.6.1M-Bus client (class_id: 72, version: 0) 100 5.6.2Wireless Mode Q channel (class_id: 73, version: 1) 105 5.6.3M-Bus master port setup (class_id: 74, version: 0) 105 5.6.4Interface classes for setting up data exchange over the Internet . 106 5.7TCP-UDP set

44、up (class_id: 41, version: 0) . 106 5.7.1IPv4 setup (class_id: 42, version: 0) . 107 5.7.2MAC address setup (class_id: 43, version: 0) . 111 5.7.3PPP setup (class_id: 44, version: 0) . 111 5.7.4GPRS modem setup (class_id: 45, version: 0) 115 5.7.5SMTP setup (class_id: 46, version: 0) . 116 5.7.6Inte

45、rface classes for setting up data exchange using S-FSK PLC 117 5.8General . 117 5.8.1Definitions and abbreviations related to the S-FSK PLC profile . 117 5.8.2Overview . 119 5.8.3S-FSK Phy instead, the standardized objects and interface classes (ICs) form an extensible library from which the manufac

46、turer can assemble (model) its products according to national specifications or contract requirements. As a key element, the server offers means to retrieve its particular structural model (the list of logical devices and the list of objects visible through the interface). The library is designed so

47、 that the entire range of products (from residential to commercial, industrial, and transmission and distribution applications) can be covered. The choice of the subset of ICs used to build a meter, and the instantiation and implementation of those ICs are part of the product design and therefore le

48、ft to the manufacturer. The concept of the standardized metering interface class library provides the different users and manufacturers with a maximum of diversity without having to sacrifice interoperability. BS EN 62056-6-2:2013Copyright European Committee for Electrotechnical Standardization Prov

49、ided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 10 62056-6-2 IEC:2013 ELECTRICITY METERING DATA EXCHANGE THE DLMS/COSEM SUITE Part 6-2: COSEM interface classes 1 Scope This part of IEC 62056 specifies a model of a meter as it is seen