BS EN 62134-1-2009 Fibre optic interconnecting devices and passive components - Fibre optic closures - Generic specification《光纤互连设备和无源元件 光纤外封壳体 一般规范》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnecting devicesand passive components Fibreoptic closures Part 1: Generic specificationBS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS

2、, 14/04/2010 07:02, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 62134-1:2009. It isidentical to IEC 62134-1:2009. It supersedes BS EN 62134-1:2002 which iswithdrawn.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86,

3、 Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are respon

4、sible for its correct application. BSI 2010ISBN 978 0 580 58772 6ICS 33.180.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2010Amendments issued sinc

5、e publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 07:02, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 62134-1 NORME EUROPENNE EUROPISCHE NORM November 2009 CENELEC European Committee for Electrotechnical Stan

6、dardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62134-1:200

7、9 E ICS 33.180.99 Supersedes EN 62134-1:2002English version Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification (IEC 62134-1:2009) Dispositifs dinterconnexion et composants passifs fibres optiques - Boitiers fibres optiques - Partie 1: Sp

8、cification gnrique (CEI 62134-1:2009) Lichtwellenleiter -Verbindungselemente und passive Bauteile - Lichtwellenleitergarnituren - Teil 1: Fachgrundspezifikation (IEC 62134-1:2009) This European Standard was approved by CENELEC on 2009-10-01. CENELEC members are bound to comply with the CEN/CENELEC I

9、nternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELE

10、C member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. C

11、ENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slova

12、kia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 07:02, Uncontrolled Copy, (c) BSIEN 62134-1:2009 - 2 - Foreword The text of document 86B/2846/FDIS, future edition 2 of IEC 62134-1, prepared by SC 86

13、B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62134-1 on 2009-10-01. This European Standard supersedes EN 62134-1:2002. The main changes with respect to EN 62134-1:2002 are l

14、isted below: addition and rewording of some terms and definitions; reconsideration of type, style and variant in the requirements; removal of quality assessment procedures. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identi

15、cal national standard or by endorsement (dop) 2010-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-10-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62134-1:2009 was approved by CENELEC

16、as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61073-1 NOTE Harmonized as EN 61073-1:2009 (not modified). IEC 61756-1 NOTE Harmonized as EN 61756-1:2006 (not modified). IEC 61758-1 NOTE

17、 Harmonized as EN 61758-1:2008 (not modified). _ BS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 07:02, Uncontrolled Copy, (c) BSI- 3 - EN 62134-1:2009 Annex ZA (normative) Normative references to international publications with their corresponding European public

18、ations The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has

19、 been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60027 Series Letter symbols to be used in electrical technology EN 60027Series IEC 60050-731 -1)International Electrotechnical Vocabulary (IEV) - Chapter 731: Optical fibre c

20、ommunication - - IEC 60068 Series Environmental testing EN 60068 Series IEC 60068-2-10 -1)Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth EN 60068-2-10 20052)IEC 60617 Data-base Graphical symbols for diagrams - - IEC 60695 Series Fire hazard testing EN 60695 Series IEC 6

21、0695-1-1 -1)Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines EN 60695-1-1 20002)IEC 60793-2 -1)Optical fibres - Part 2: Product specifications - General EN 60793-2 20082)IEC 60794-2 -1)Optical fibre cables - Part 2: Indoor cable

22、s - Sectional specification EN 60794-2 20032)IEC 60825-1 -1)Safety of laser products - Part 1: Equipment classification and requirements EN 60825-1 20072)IEC 61300-2 Series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2: Tests EN 61300-2 S

23、eries IEC 61300-3 Series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3: Examinations and measurements EN 61300-3 Series IEC 61753-1 -1)Fibre optic interconnecting devices and passive components performance standard - Part 1: General and g

24、uidance for performance standards EN 61753-1 20072)IEC 61754 Series Fibre optic connector interfaces EN 61754 Series IEC/TR 61930 -1)Fibre optic graphical symbology - - 1)Undated reference. 2)Valid edition at date of issue. BS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/

25、04/2010 07:02, Uncontrolled Copy, (c) BSIEN 62134-1:2009 - 4 - Publication Year Title EN/HD Year IEC/TR 61931 -1)Fibre optic - Terminology - - IEC 62005 Series Reliability of fibre optic interconnecting devices and passive components EN 62005 Series IEC QC 001002-3 2005 IEC Quality Assessment System

26、 for Electronic Components (IECQ) - Rules of Procedure - Part 3: Approval procedures - - ISO 129-1 -1)Technical drawings - Indication of dimensions and tolerances - Part 1: General principles - - ISO 286-1 -1)ISO system of limits and fits - Part 1: Bases of tolerances, deviations and fitsEN 20286-1

27、19932)ISO 1101 -1)Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out EN ISO 1101 20052)ISO 4892-3 -1)Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps EN ISO 4892-3 20062)ISO 8601 -1)Data

28、elements and interchange formats - Information interchange - Representation of dates and times - - BS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 07:02, Uncontrolled Copy, (c) BSI 2 62134-1 IEC:2009 CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Te

29、rms and definitions .8 4 Requirements .10 4.1 Classification.10 4.1.1 General .10 4.1.2 Type10 4.1.3 Style11 4.1.4 Variant 11 4.1.5 Arrangement12 4.1.6 Normative reference extensions 12 4.1.7 Environmental category Service categories 13 4.2 Documentation 13 4.2.1 Specification system13 4.2.2 Symbols

30、 15 4.2.3 Drawings .15 4.2.4 Measurements.15 4.2.5 Tests .15 4.2.6 Test reports.16 4.2.7 Instructions for use16 4.3 Standardisation system .16 4.3.1 Specification standards .16 4.3.2 Interface standards16 4.3.3 Performance standards16 4.3.4 Reliability standards 17 4.4 Design and construction 18 4.4

31、.1 Materials .18 4.5 Workmanship 18 4.6 Quality 18 4.7 Performance19 4.8 Identification and marking .19 4.8.1 General .19 4.8.2 Variant identification number .19 4.8.3 Component marking 19 4.8.4 Package marking.19 4.9 Storage conditions 19 4.10 Safety .19 Bibliography21 Figure 1 Standardisation syst

32、em 18 BS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 07:02, Uncontrolled Copy, (c) BSI62134-1 IEC:2009 3 Table 1 Operating service environments 13 Table 2 Multilevel IEC specification structure.14 BS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAN

33、DARDS, 14/04/2010 07:02, Uncontrolled Copy, (c) BSI 6 62134-1 IEC:2009 INTRODUCTION Closures comprise a broad component family that functions to protect, secure and store passive fibre optic components (such as splices or connectors) or other non-interconnecting devices (such as optical branching de

34、vices). They are installed at either indoor or outdoor locations, and provide access to the optical path of one or more cabled optical fibres. They also generally provide a fibre management system for the orderly management, routing, and storage of optical fibres. Configuration definitions may speci

35、fy integrated functions, or permit grouped combinations of compatible independent sub-units. Specific classification requirements vary, and may or may not include isolation from environmental hazards (such as water ingress), structure codes (such as fire safety), or other appropriate considerations.

36、 Closures are not intended to provide the primary packaging or structure for uncabled optical fibre splices (such as a rigid mechanical splice shell, or a fusion splice protection sleeve). Specification for those devices is defined in IEC 61073-1. It is also intended that closures specified under th

37、is standard are not sufficiently characterized for continuous brine or deep-water submersion. Examples of this are oceanic or lake-crossing applications. Cables, closures and installation methods suited to this use are highly specialised and are not within the scope of this standard or supporting te

38、st procedures. BS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 07:02, Uncontrolled Copy, (c) BSI62134-1 IEC:2009 7 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CLOSURES Part 1: Generic specification 1 Scope This part of IEC 62134 establis

39、hes uniform generic requirements for fibre optic closures. This standard does not cover test and measurement procedures, which are described in IEC 61300 series. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, on

40、ly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IECQ 001002-3:2005, IEC Quality Assessment System for Electronic Components (IECQ) Rules of Procedure Part 3: Approval procedures IEC 60027 (all parts), Letter symb

41、ols to be used in electrical technology IEC 60050(731), International Electrotechnical Vocabulary Chapter 731: Optical fibre communication IEC 60068 (all parts), Environmental testing IEC 60068-2-10, Environmental testing Part 2-10: Tests Test J and guidance: Mould growth IEC 60617 (all parts), Grap

42、hical symbols for diagrams IEC 60695 (all parts), Fire hazard testing IEC 60695-1-1, Fire hazard testing Part 1-1: Guidance for assessing the fire hazard of electrotechnical products General guidelines IEC 60793-2, Optical fibres Part 2: Product specifications IEC 60794-2, Optical fibre cables Part

43、2: Indoor cables Sectional specification IEC 60825-1, Safety of laser products Part 1: Equipment classification and requirements IEC 61300-2 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2: Tests IEC 61300-3 (all parts), Fibre opti

44、c interconnecting devices and passive components Basic test and measurement procedures Part 3: Examinations and measurements BS EN 62134-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 07:02, Uncontrolled Copy, (c) BSI 8 62134-1 IEC:2009 IEC 61753-1, Fibre optic interconnecti

45、ng devices and passive components performance standard Part 1: General and guidance for performance standards IEC 61754 (all parts), Fibre optic connector interfaces IEC/TR 61930, Fibre optic graphical symbology IEC/TR 61931, Fibre optic Terminology IEC 62005 (all parts); Reliability of fibre optic

46、interconnecting devices and passive optical components ISO 129-1, Technical drawings Indication of dimensions and tolerances Part 1: General principles ISO 286-1, ISO system of limits and fits Part 1: Bases of tolerances, deviations and fits ISO 1101, Geometrical Product Specifications (GPS) Geometr

47、ical tolerancing Tolerances of form, orientation, location and run-out ISO 4892-3, Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps ISO 8601, Data elements and interchange formats Information interchange Representation of dates and times 3 Terms and definitions F

48、or the purposes of this document, the terms and definitions given in IEC 60050(731) and IEC 61931, as well as the following apply. 3.1 cable splice permanent or separable joint between two or more optical fibre cables. It may consist of optical fibre joints, fibre management systems, closures or oth

49、er safety devices 3.2 closure all external housings except, outdoor wall boxes, cabinets or pedestals 3.3 enclosure indoor and outdoor housings (wall boxes, cabinets, cases, distribution frames or pedestals) 3.4 fibre management system system to control, protect and store fibres from the incoming to the outgoing fibres. It is intended for installation within another closure 3.5 fibre splice permanent or separable splice between two o