1、Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN 62148-4:2003 Fibre optic active components and devices Package and interface standards Part 4: PN 1x9 plastic optical fibre transceivers The European Standard EN 6
2、2148-4:2003 has the status of a British Standard ICS 33.180.30 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSIBS EN 62148-4:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee o
3、n 21 April 2004 BSI 21 April 2004 ISBN 0 580 43664 0 National foreword This British Standard is the official English language version of EN 62148-4:2003. It is identical with IEC 62148-4:2003 The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcom
4、mittee GEL/86/3, Fibre optic systems and active devices, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in th
5、is document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a co
6、ntract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals
7、 for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover. The BSI copyright notice displayed
8、 in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 62148-4 NORME EUROPENNE EUROPISCHE NORM Jul
9、y 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means re
10、served worldwide for CENELEC members. Ref. No. EN 62148-4:2003 E ICS 33.180.30 English version Fibre optic active components and devices Package and interface standards Part 4: PN 1x9 plastic optical fibre transceivers (IEC 62148-4:2003) Composants et dispositifs actifs en fibres optiques Normes de
11、botier et dinterface Partie 4: Emetteurs-rcepteurs fibres optiques en plastique PN 1x9 (CEI 62148-4:2003) Aktive Lichtwellenleiterbauelemente und -gerte Gehuse- und Schnittstellennormen Teil 4: PN 1x9 Sende- und Empfangsmodule fr Kunststofffasern (IEC 62148-4:2003) This European Standard was approve
12、d by CENELEC on 2003-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa
13、l standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language a
14、nd notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherland
15、s, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSIEN 64128-:40023 - - 2 Foreword The text of document 86C/521/FDIS, future edition 1 of IEC 62148-4, prepared
16、by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62148-4 on 2003-07-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of
17、 an identical national standard or by endorsement (dop) 2004-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-07-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been
18、 added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62148-4:2003 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60191 NOTE Harmoni
19、zed in the EN 60191 series (not modified). IEC 61281-1 NOTE Harmonized as EN 61281-1:1999 (not modified). _ Page2 EN621484:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSI-841263002:CEI 4 3 CONTENTS FOREWORD 5 INTRODUCTION4 1 Scop
20、e 5 2 Normative references 5 3 Definitions and abbreviations. 5 4 Classification. 5 5 Specification of the fibre optic transceiver 5 5.1 General5 5.2 Optical connector interface. 5 5.3 Optical port assignment 6 6 Specification of the electrical interface. 6 6.1 General6 6.2 Electrical Interface . 6
21、7 Outline and footprint 7 7.1 Drawing of case outline. 7 7.2 Drawing of footprint. 9 7.3 Dimensions of footprint 9 Bibliography. 01 FiugrtcelE 1 ericet larmtpo dna laniicop larn tumebrgni assignmnets (veiwde from evoba wisnip ht ednurhtaen)6 C 2 erugiFase eniltuo 7 3 erugiF nirptooFt 9 T1 elba Optic
22、aop lra tssignmnets 6 T2 elba alP stic itpocla fibre trnascievnip re funcd noitefioitinns 7 T3 elba D imnesoins of case eniltuo . 8 Table 4 Dimensions of footprint.9 Page3 EN621484:2003 62148-4 IEC:2003 3 NOCETNST OFERWODR 5 INTROUDCTION4 1 Scpoe 5 2 Normaitve refenerces 5 3 Defoitinins bba dnarnoit
23、aives. 5 4 Calssificaoitn. 5 5 Sepcificnoita of eht fio erbpcit trancseiver 5 1.5 General5 2.5 Oitpcla crotcenno tnierface. 5 3.5 Oitpcp laotr assignmtne 6 6 Sepcificnoita of ele ehtctrictni laerface. 6 1.6 General6 2.6 EelcirtcaetnI lrafce . 6 7 Odna eniltu fptoortni 7 1.7 Darwifo gn case niltuoe.
24、7 2.7 Darwifo gn ftooprnit 9 3.7 Dimensisno otnirptoof f 10 Bibliography 11 Figure 1 Electrical terminal and optical port numbering assignments (viewed from above with pins underneath). 6 Figure 2 Case outline 7 Figure 3 Footprint 9 Table 1 Optical port assignments 6 Table 2 Plastic optical fibre tr
25、ansceiver pin function definitions 7 Table 3 Dimensions of case outline . 8 Table 4 Dimensions of footprint.9 3egaP 3002:484126NE Annex ZA (normative) Normative references to international publications with their corresponding European publications . 10 Licensed Copy: Wang Bin, ISO/Exchange China St
26、andards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSI-841263002:CEI 4 9 INTRODUCTION Fibre optic transceivers are used to convert electrical signals into optical signals and vice versa. Page4 EN621484:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 Jul
27、y 2004, Uncontrolled Copy, (c) BSI-841263002:CEI 4 11 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PACKAGE AND INTERFACE STANDARDS Part 4: PN 1x9 plastic optical fibre transceivers 1 Scope This part of IEC 62148 covers the physical interface specifications for the PN 1x9 transceiver family for plastic
28、optical fibre. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61754-1
29、6, Fibre optic connector interfaces Part 16: Type PN connector family IEC 62148-1, Fibre optic active components and devices Package and interface standards Part 1: General and guidance 3 Definitions and abbreviations For the purpose of this part of IEC 62148, the following abbreviation applies. 3.1
30、 PCB printed circuit board 4 Classification The transceiver described in this document is classified as type 1 according to the classification of IEC 62148-1. 5 Specification of the fibre optic transceiver 5.1 General The intent of this document is to specify the physical requirements of fibre optic
31、 transceivers that will enable mechanical interchangeability of transceivers at the PCB, including panel mounting requirements. 5.2 Optical connector interface This specification applies to the PN optical connector interface in accordance with IEC 61754-16. Page5 EN621484:2003Licensed Copy: Wang Bin
32、, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSI-841263002:CEI 4 31 5.3 Optical port assignment Assignment of the optical transmit and receive ports is aligned to the electrical pins. One half of the module is the “transmit: TX” side and another is the “rec
33、eive: RX” side. Optical port numbering assignments are shown in Figure 1. 1 2 3 4 5 6 7 8 9 TX RX MS MS No. 2 No. 1 IEC 1539/03 Figure 1 Electrical terminal and optical port numbering assignments (viewed from above with pins underneath) The assignment of optical ports is given in Table 1. Table 1 Op
34、tical port assignments Optical port Functional description No. 1 Transmitter optical output No. 2 Receiver optical input 6 Specification of the electrical interface 6.1 General The electrical interface in this specification defines only the functionality of each pin. 6.2 Electrical Interface 6.2.1 N
35、umbering of electrical terminals Pin numbering assignment are shown in Figure 1 (viewed from the top of the transceiver with pins underneath). TX = transmitter, RX = receiver. 6.2.2 Electrical termination assignment The assignment of the electrical terminals is given in Table 2. Page6 EN621484:2003L
36、icensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSI-841263002:CEI 4 51 Table 2 Plastic optical fibre transceiver pin function definitions Pin part Symbol Functional description 1 Veer Ground 2 RD+ Receiver data out 3R D Receiver data out
37、bar 4 SD Receiver signal detect out 5 Vccr Receiver positive power supply 6 Tone Tone signal in (or transmitter power supply ) 7T D Transmitter data in bar 8 TD+ Transmitter data in 9 Veet Ground MS MS Mounting studs The mounting studs are provided for transceiver mechanical attachment to the circui
38、t board. They shall not be tied to internal circuit of transceiver because they may also provide optional connections of the transceiver to the circuit board ground or to the equipment chassis ground. 7 Outline and footprint 7.1 Drawing of case outline A drawing of the case outline is provided in Fi
39、gure 2, and the dimensions in Table 3. B G J L No. 1 (9) K 1 9 PN duplex mechanical reference plane* (2) FD H E C A X Y Z M 0,25 N M No. 2 No. 2 No. 1 X Z Y M 0,15 X Z Y(8) IEC 1540/03 * see IEC 61754-16. Figure 2 Case outline Page7 EN621484:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards
40、Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSI-841263002:CEI 4 71 Table 3 Dimensions of case outline Dimensions mm Reference Minimum Maximum Notes A 11,98 12,48 B 39,12 C 25,40 D 11,60 E 2,00 5,80 F 1,20 1,55 Diameter G 15,70 16,90 H 20,32 Basic dimension J 20,32 Basic dimension K 0,45
41、 0,55 Diameter L 2,00 5,80 M 2,54 Basic dimension N 5,65 6,15 Page8 EN621484:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSI-841263002:CEI 4 91 7.2 Drawing of footprint A drawing of the footprint is provided in Figure 3. 1 Y h c
42、Hole pattern PN duplex plug * j m q k X Y Hole pattern M 0,00 X (8) (9) f (2) 234 5 6 7 8 9 X Y M 0,00 IEC 1541/03 * This dimension depends on the application. Figure 3 Footprint 7.3 Dimensions of footprint Table 4 Dimensions of footprint Dimensions mm Reference Minimum Maximum Notes c 25,40 Referen
43、ce dimension f 1,80 2,00 h 20,32 Basic dimension j 20,32 Basic dimension k 0,70 0,90 m 2,54 Basic dimension q3 , 0 0 Reference dimension Page9 EN621484:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSI - - 3 EN 64128-:40023 Annex Z
44、A (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the pu
45、blications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including
46、 amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61754-16 - 1)Fibre optic connector interfaces Part 16: Type PN connector family EN 61754-16 2000 2)IEC 62148-1 - 1)Fib
47、re optic active components and devices - Package and interface standards Part 1: General and guidance EN 62148-1 2002 2)1)Undated reference. 2)Valid edition at date of issue. 11egaP 3002:484126NEPage10 EN621484:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 200
48、4, Uncontrolled Copy, (c) BSI-841263002:CEI 4 12 Bibliography IEC 60191 (all parts), Mechanical standardization of semiconductor devices IEC 61281-1, Fibre optic communication subsystems Part 1: Generic specification ISO 1101, Technical drawings Geometrical tolerancing Tolerancing of form, orientation, location and run-out Generalities, definitions, symbols, indications on drawings _ 01egaP 3002:484126NEPage11 EN621484:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 26 July 2004, Uncontrolled Copy, (c) BSIBS EN 62148-4:2003 BSI 389 Chiswick High Road London W
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1