1、BRITISH STANDARD BS EN 62148-6:2003 Fibre optic active components and devices Package and interface standards Part 6: ATM-PON transceivers The European Standard EN 62148-6:2003 has the status of a British Standard ICS 33.180.20 BS EN 62148-6:2003 This British Standard was published under the authori
2、ty of the Standards Policy and Strategy Committee on 7 November 2003 BSI 7 November 2003 ISBN 0 580 42902 4 National foreword This British Standard is the official English language version of EN 62148-6:2003. It is identical with IEC 61248-6:2003. The UK participation in its preparation was entruste
3、d by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems and active devices, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which impleme
4、nt international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does
5、not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European
6、committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2
7、 to 12, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 62148-6 NORME EUROPENNE EUROPISCHE NORM October 2003 CENELEC European Committ
8、ee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC me
9、mbers. Ref. No. EN 62148-6:2003 E ICS 33.180.20 English version Fibre optic active components and devices Package and interface standards Part 6: ATM-PON transceivers (IEC 62148-6:2003) Composants et dispositifs actifs en fibres optiques Normes de botier et dinterface Partie 6: Emetteurs-rcepteurs P
10、ON-ATM (CEI 62148-6:2003) Aktive Lichtwellenleiterbauelemente und -gerte Gehuse- und Schnittstellennormen Teil 6: ATM-PON Sende- und Empfangsmodule (IEC 62148-6:2003) This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regul
11、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. Thi
12、s European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC member
13、s are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of
14、document 86C/538/FDIS, future edition 1 of IEC 62148-6, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62148-6 on 2003-10-01. The following dates were fixed: latest date by which
15、 the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-10-01 Annexes designated “normative“ are part of the body of the sta
16、ndard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62148-6:2003 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes hav
17、e to be added for the standards indicated: IEC 60130 NOTE Harmonized in EN 60130 series (not modified). IEC 60191 NOTE Harmonized in EN 60191 series (not modified). IEC 60603 NOTE Harmonized in EN 60603 series (not modified). IEC 60794 NOTE Harmonized in EN 60794 series (not modified). IEC 60825 NOT
18、E Harmonized in EN 60825 series (not modified). EC 61076 NOTE Harmonized in EN 61076 series (not modified). IEC 61281-1 NOTE Harmonized as EN 61281-1:1999 (not modified). IEC 61754 NOTE Harmonized in EN 61754 series (not modified). _ Page2 EN621486:2003CONTENTS INTRODUCTION.4 1 Scope5 2 Normative re
19、ferences5 3 Terms, definitions and abbreviations5 3.1 Terms and definitions5 3.2 Abbreviations.6 4 Classification.6 5 Optical interface6 5.1 General.6 5.2 Pigtail interface6 6 Electrical interface.7 6.1 General.7 6.2 Numbering of electrical terminals .7 6.3 Electrical terminal assignment.7 7 Outline
20、9 7.1 Drawing of case outline9 7.2 Drawing of case footprint .10 Annex ZA (normative) Normative references to international publications with their corresponding European publications11 Bibliography .12 Figure 1 Numbering assignments of electrical terminals (viewed from above with pins underneath) .
21、7 Figure 2 Case outline .9 Figure 3 Case footprint .10 Table 1 Pin function definitions: transmitter section of the transceiver .8 Table 2 Pin function definitions: receiver section of the transceiver .8 Page3 EN621486:2003INTRODUCTION Fibre optic transceivers are used to convert electrical signals
22、into optical signals and vice versa. This standard covers the physical interface for transceivers for ATM-PON systems. This transceiver is designed as a 24-pin package for use with through holes on the printed circuit board. Page4 EN621486:2003FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PACKAGE AND IN
23、TERFACE STANDARDS Part 6: ATM-PON transceivers 1 Scope This part of IEC 62148 covers the physical interface specification of optical transceivers for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU) as ITU Recommendat
24、ion G.983.1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793: al
25、l parts, Optical fibres IEC 60874: all parts, Connectors for optical fibres and cables IEC 62148-1: Fibre optic active components and devices Package and interface standards Part 1: General and guidance ITU-T Recommendation G.652: Characteristics of a single-mode optical fibre cable ITU-T Recommenda
26、tion G.983.1: Broadband optical access systems based on Passive Optical Networks (PON) 3 Terms, definitions and abreviations 3.1 Terms and definitions For the purpose of this document, the definitions given in IEC 62148-1 (for physical concepts, types of devices, general terms and terms related to r
27、atings and characteristics) in ITU-T Recommendation G.983.1, as well as the following definitions are applicable. 3.1.1 OAN (optical access network) set of access links sharing the same network-side interfaces and supported by optical access transmission systems. The OAN may include a number of ODNs
28、 connected to the same OLT 3.1.2 ODN (optical distribution network) apparatus or component that provides the optical transmission means from the OLT to the users, and vice versa. It utilizes passive optical components Page5 EN621486:20033.1.3 OLT (optical line termination) apparatus that provides th
29、e network-side interface of the OAN, and is connected to one or more ODNs 3.1.4 ONU (optical network unit) apparatus that provides (directly or remotely) the user-side interface of the OAN, and is connected to the ODN 3.2 Abbreviations ATM-PON asynchronous-transfer-mode passive optical network CDR c
30、lock and data recovery LD laser diode IC integrated circuit 4 Classification This part of IEC 62148, which gives the interface standards of optical transceiver modules for ATM-PON systems specifies the interface of a type 3 module with LD driver circuits and clock and data recovery (CDR) ICs for ONU
31、 module. Fibre optic transceiver modules are classified into 5 types of forms according to the combination of mating types of electrical and optical interfaces. Details are described in IEC 62148-1. The 5 types are as follows: Type 1: Fibre optic connector interface with direct solderable type elect
32、rical terminals. Type 2: Fibre optic connector interface with plug-in type electrical terminals. Type 3: Fibre optic pigtail interface with direct solderable type electrical terminals. Type 4: Fibre optic pigtail interface with plug-in type electrical terminals. Type 5: Modules are not classified in
33、to type 1 type 4. (A typical example is a module that has both electrical connectors and non-connector type terminals as an electrical interface such as a coaxial connector for signal and lead terminals for the power supply.) 5 Optical interface 5.1 General The intent of this document is to adequate
34、ly specify the physical requirements of an optical transceiver that will enable mechanical interchangeability of transceivers to this specification both at the printed circuit board and for any panel mounting requirement. 5.2 Pigtail interface All optical fibres which are defined in IEC 60793 and th
35、e ITU-T Recommendation G.652 are applicable. All optical connectors which are defined in IEC 60874 are applicable, if a pigtail is to be terminated with an optical connector. Page6 EN621486:20036 Electrical interface 6.1 General The electrical interface in this specification defines only the basic f
36、unctionality of each pin. 6.2 Numbering of electrical terminals Pin numbering assignments are shown in Figure 1 (electrical terminals viewed from the top of the module with pins underneath). 1 24 13 12 IEC 1900/03 Figure 1 Numbering assignments of electrical terminals (viewed from above with pins un
37、derneath) 6.3 Electrical terminal assignment Electrical terminal assignment is based on Tables 1 and 2 which provide the definitions of the pin functions for the transmitter section and the receiver section of the transceiver, respectively. Page7 EN621486:2003Table 1 Pin function definitions: transm
38、itter section of the transceiver Pin number Terminal identification Functional description Notes 1T x V CC Transmitter power supply 2 Tx GND Transmitter ground 3 Bias cont (p) Transmitter bias control, positive Optional 4 Bias cont (n) Transmitter bias control, negative Optional 5N C 6 Clock in (p)
39、Transmitter clock in, positive 7 Clock in (n) Transmitter clock in, negative 8 Tx GND Transmitter ground 9 Data in (p) Transmitter data in, positive 10 Data in (n) Transmitter data in, negative 11 Shut down Transmitter shut down 12 Tx V cc Transmitter power supply Table 2 Pin function definitions: r
40、eceiver section of the transceiver Pin number Terminal identification Functional description 13 Rx V CC Receiver power supply 14 NC 15 Data out (n) Receiver data out, negative 16 Data out (p) Receiver data out, positive 17 Rx GND Receiver ground 18 Clock out (n) Receiver clock out, negative 19 Clock
41、 out (p) Receiver clock out, positive 20 Rx alarm Receiver alarm 21 NC 22 NC 23 Rx GND Receiver ground 24 Rx V CC Receiver power supply Page8 EN621486:20037 Outline 7.1 Drawing of case outline The case outline drawing, as well as the dimensions, are shown in Figure 2. A B 24 E 1 13 12 F Y X D G M K
42、J H C L Z Y Y X Y 0,0 M Z 24 J IEC 1901/03 Dimensions of case outline Dimension Minimum mm Maximum mm Notes A 55,00 B 43,00 C8 , 9 0 D 35,56 Basic dimension E3 , 7 2 F 35,56 a G 24,52 H 27,94 Basic dimension b J 0,45 0,70 K 0,15 8,75 L3 , 1 0 M 40,00 Strain relief c aThis item shall be specified by
43、each vendor. bAll 24 pins are treated as a single pattern. cSome vendors do not use the strain relief. Figure 2 Case outline Page9 EN621486:20037.2 Drawing of case footprint The drawing of the case footprint and the dimensions are shown in Figure 3. a b d 24 e x Y g 1 13 12 h Hole pattern f Reserved
44、 area for pigtail fibre treatment 1)These items shall be specified by each vendor. 1) 1) X Y 0,1 M 24 J IEC 1902/03 Dimensions of case footprint Dimension Minimum mm Maximum mm Notes a 55,00 b 43,00 d 35,56 Basic dimension e3 , 7 2 f 0,0 35,56 g2 , 5 4 h 27,94 Basic dimension a j0 , 81 , 0 aPin hole
45、s 11 2,54 pitch Figure 3 Case footprint Page10 EN621486:2003 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative r
46、eferences are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references
47、the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793 Series Optical fibres EN 60793 Series IEC 60
48、874 Series Connectors for optical fibres and cablesEN 60874 Series IEC 62148-1 - 1)Fibre optic active components and devices - Package and interface standards Part 1: General and guidance EN 62148-1 2002 2)ITU-T Recommendation G.652 2000 Characteristics of a single-mode optical fibre cable - - ITU-T
49、 Recommendation G.983.1 1998 Broadband optical access systems bases on Passive Optical Networks (PON) - - 1)Undated reference. 2)Valid edition at date of issue. Page11 EN621486:2003Bibliography IEC 60130: all parts, Connectors for frequencies below 3 MHz IEC 60191: all parts, Mechanical standardization of semiconductor devices IEC 60603: all parts, Connectors for frequencies below 3 MHz for use with printe
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1