BS EN 62271-107-2012 High-voltage switchgear and controlgear Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV《高压开关装置和控制装置 额定电压大于1.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHigh-voltage switchgear and controlgearPart 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kVBS EN 62271-107:2012National f

2、orewordThis British Standard is the UK implementation of EN 62271-107:2012. It isidentical to IEC 62271-107:2012. It supersedes BS EN 62271-107:2005 whichis withdrawn.The UK participation in its preparation was entrusted by Technical CommitteePEL/17, Switchgear, controlgear, and HV-LV co-ordination,

3、 to SubcommitteePEL/17/1, High-voltage switchgear and controlgear.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application

4、. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 69928 3ICS 29.130.10 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on

5、30 September 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62271-107:2012EUROPEAN STANDARD EN 62271-107 NORME EUROPENNE EUROPISCHE NORM August 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechniq

6、ue Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62271-107:2012 E ICS 29.130.10 Supersedes EN 62271-107:2005English ver

7、sion High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV (IEC 62271-107:2012) Appareillage haute tension - Partie 107: Circuits-switchers fusibls pour courant alternatif de tension assigne suprieure 1

8、 kV et jusqu 52 kV inclus (CEI 62271-107:2012) Hochspannungs-Schaltgerte und -Schaltanlagen - Teil 107: Wechselstrom-Leistungsschalter-Sicherungs-Kombinationen fr Bemessungsspannungen ber 1 kV bis einschlielich 52 kV (IEC 62271-107:2012) This European Standard was approved by CENELEC on 2012-07-03.

9、CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained

10、on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the

11、 CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hun

12、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62271-107:2012EN 62271-107:2012 - 2 - Foreword The text of document 17A/997/FDIS, future editi

13、on 2 of IEC 62271-107, prepared by SC 17A, “High-voltage switchgear and controlgear“, of IEC TC 17, “Switchgear and controlgear“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62271-107:2012. The following dates are fixed: latest date by which the document has to be imp

14、lemented at national level by publication of an identical national standard or by endorsement (dop) 2013-04-03 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-07-03 This document supersedes EN 62271-107:2005. EN 62271-107:2012 includes the fo

15、llowing significant technical changes with respect to EN 62271-107:2005: the reference to EN 60694 has been changed to EN 62271-1; the new clauses and subclauses from EN 62271-1 have been added and where necessary new wording has been provided: 4.11 Rated filling levels for insulation and/or operati

16、on; 5.19 X-ray emission; 5.20 Corrosion; 6.10 Additional tests on auxiliary and control circuits; 6.11 X-radiation test procedure for vacuum interrupters; 12 Influence of the product on the environment; the normative references have been updated: EN 60265-1 to EN 62271-103, IEC 60787 to IEC/TR 60787

17、, IEC 60466 to EN 62271-201, and IEC/TR 60787 was moved to the bibliography; the figures and tables have been placed in the document where they are first cited; the numbering of figures and tables has been changed to obtain the correct order; the definition of NSDD was deleted. This definition is in

18、cluded in EN 62271-1; the acceptance criteria have been aligned with 6.101.4 of EN 62271-103:2011; the various provisions expressed about “extension of the validity of type tests“ have been grouped under 6.103: some of the rules were duplicated in Clauses 6 and 8, and it seems better fitted to deal

19、within each type test sub-clause only with the type test to be performed. Conditions have not been changed, but the wording is clearer; new numbering of subclauses in Clauses 8 and 9 to avoid conflict with clauses from EN 62271-1. BS EN 62271-107:2012- 3 - EN 62271-107:2012 This International Standa

20、rd is to be read in conjunction with EN 62271-1:2008, to which it refers and which is applicable unless otherwise specified. In order to simplify the indication of corresponding requirements, the same numbering of clauses and subclauses is used as in EN 62271-1. Amendments to these clauses and subcl

21、auses are given under the same numbering, whilst additional subclauses, are numbered from 101. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent

22、 rights. Endorsement notice The text of the International Standard IEC 62271-107:2012 was approved by CENELEC as a European Standard without any modification. BS EN 62271-107:2012EN 62271-107:2012 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding

23、European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendm

24、ents) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60282-1 2009 High-voltage fuses - Part 1: Current-limiting fuses EN 60282-1 2009 IEC 62271-1 2007 High-voltage switch

25、gear and controlgear - Part 1: Common specifications EN 62271-1 2008 IEC 62271-100 2008 High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers EN 62271-100 2009 IEC 62271-102 + corr. April + corr. February + corr. May 2001 2002 2005 2003 High-voltage switchgear and

26、controlgear - Part 102: Alternating current disconnectors and earthing switches EN 62271-102 + corr. July + corr. March 2002 2008 2005 IEC 62271-103 2011 High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV EN 62271-103 2011 IEC 62271-1

27、05 - High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations EN 62271-105 - IEC 62271-200 - High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV EN 62271-2

28、00 - IEC 62271-201 - High-voltage switchgear and controlgear - Part 201: AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV EN 62271-201 - BS EN 62271-107:2012 2 62271-107 IEC:2012 CONTENTS 1 General 7 1.1 Scope 7 1.2 Normative references 7

29、2 Normal and special service conditions 8 3 Terms and definitions . 8 3.1 General terms . 8 3.2 Assemblies of switchgear and controlgear 8 3.3 Parts of assemblies 8 3.4 Switching devices . 8 3.5 Parts of switchgear and controlgear 9 3.6 Operation . 9 3.7 Characteristic quantities . 10 3.101 Fuses .

30、12 4 Ratings . 12 4.1 Rated voltage (Ur) 13 4.2 Rated insulation level . 13 4.3 Rated frequency (fr) 13 4.4 Rated normal current and temperature rise . 13 4.4.1 Rated normal current (Ir) . 13 4.4.2 Temperature rise. 13 4.4.101 Rated maximum thermal current (Ith) 13 4.5 Rated short-time withstand cur

31、rent (Ik) . 13 4.6 Rated peak withstand current (Ip) . 13 4.7 Rated duration of short circuit (tk) . 14 4.8 Rated supply voltage of closing and opening devices and of auxiliary and control circuits (Ua) . 14 4.9 Rated supply frequency of closing and opening devices and of auxiliary circuits 14 4.10

32、Rated pressure of compressed gas supply for controlled pressure systems 14 4.11 Rated filling levels for insulation and/or operation . 14 4.101 Rated short-circuit breaking current Isc. 14 4.102 Rated transient recovery voltage 14 4.103 Rated short-circuit making current 14 4.104 Rated take-over cur

33、rent 15 5 Design and construction . 15 5.1 Requirements for liquids in fused circuit-switchers 15 5.2 Requirements for gases in fused circuit-switchers. 15 5.3 Earthing of fused circuit-switchers 15 5.4 Auxiliary and control equipment 15 5.5 Dependent power operation 16 5.6 Stored energy operation .

34、 16 5.7 Independent manual or power operation (independent unlatched operation) . 16 5.8 Operation of releases . 16 5.9 Low- and high- pressure interlocking and monitoring devices 16 5.10 Nameplates 16 BS EN 62271-107:201262271-107 IEC:2012 3 5.11 Interlocking devices 17 5.12 Position indication 17

35、5.13 Degrees of protection by enclosures . 17 5.14 Creepage distances for outdoor insulators 17 5.15 Gas and vacuum tightness 17 5.16 Liquid tightness 17 5.17 Fire hazard (flammability) . 17 5.18 Electromagnetic compatibility (EMC) 17 5.19 X-ray emission 17 5.20 Corrosion 17 5.101 Linkages between t

36、he fuse striker(s) and the circuit-switcher release . 18 5.102 Low over-current conditions (long fuse pre-arcing time conditions) . 18 6 Type tests 18 6.1 General 18 6.1.1 Grouping of tests 19 6.1.2 Information for identification of specimens 19 6.1.3 Information to be included in type-test reports

37、. 19 6.2 Dielectric tests 19 6.3 Radio interference voltage (r.i.v.) test . 19 6.4 Measurement of the resistance of circuits . 19 6.5 Temperature-rise tests 19 6.6 Short-time withstand current and peak withstand current tests 19 6.7 Verification of the protection . 19 6.8 Tightness tests . 20 6.9 El

38、ectromagnetic compatibility tests (EMC) 20 6.10 Additional tests on auxiliary and control circuits 20 6.11 X-radiation test procedure for vacuum interrupters . 20 6.101 Making and breaking tests 20 6.101.1 Conditions for performing the tests 20 6.101.2 Test duty procedures 25 6.101.3 Behaviour of th

39、e fused circuit-switcher during tests . 30 6.101.4 Condition of the apparatus after tests 30 6.102 Mechanical operation tests . 31 6.102.1 Condition of fused circuit-switcher during and after mechanical operation tests 32 6.102.2 Condition of the fuses during and after mechanical operation tests . 3

40、2 6.103 Extension of validity of type tests 32 6.103.1 Dielectric properties 32 6.103.2 Temperature rise. 32 6.103.3 Making and breaking . 33 7 Routine tests 33 7.101 Mechanical operating tests . 33 8 Guide for the selection of fused circuit-switchers 34 8.1 Selection of rated values 34 8.2 Continuo

41、us or temporary overload due to changed service conditions 34 8.101 Additional criteria 34 8.102 Short-circuit breaking current 34 8.103 Rated maximum thermal current . 35 8.104 Currents between thermal current and I3of the fuses . 35 BS EN 62271-107:2012 4 62271-107 IEC:2012 8.105 Transfer current

42、35 8.106 Take-over current . 35 8.107 Extension of the validity of type tests 35 8.108 Operation . 36 8.109 Comparison of performances of fused circuit-switchers with performances of switch-fuse combinations and circuit-breakers 36 9 Information to be given with enquiries, tenders and orders . 37 9.

43、1 Information to be given with enquiries and orders 37 9.2 Information to be given with tenders 37 10 Rules for transport, storage, installation, operation and maintenance . 38 11 Safety . 38 12 Influence of the product on the environment . 38 Annex A (informative) Applicability of the rated take-ov

44、er current test duty 39 Bibliography 47 Figure 1 Characteristics for determining the take-over current . 15 Figure 2 Arrangement of test circuits for test duties TDIth, TDIsc, TDItoand TDIlow. 22 Figure 3 Representation of a specified TRV by a two-parameter reference line and a delay line 24 Figure

45、4 Example of a two parameters envelope for a TRV 25 Figure 5 Measurement of the power frequency recovery voltage with striker operation . 27 Figure A.1 Visualization of the application margin for a given fuse . 41 Table 1 Nameplate markings 16 Table 2 Summary of test parameters for test duties . 29

46、Table 3 Comparison between switch-fuse combination and fused circuit-switcher 37 Table 4 Comparison between fused circuit-switcher and circuit breaker . 37 Table A.1 Minimum application margin Am according to fuse characteristic 44 Table A.2 Minimum protection time delay . 45 Table A.3 Examples of p

47、ossible need for time delay 45 BS EN 62271-107:201262271-107 IEC:2012 7 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV 1 General 1.1 Scope Subclause 1.1 of IEC 62271-1:2007 is not applicable, and i

48、s replaced as follows. This part of IEC 62271 applies to three-pole operated units for distribution systems that are functional assemblies of a circuit-switcher and current-limiting fuses designed so as to be capable of: breaking, at the rated recovery voltage, any load or fault current up to and in

49、cluding the rated short-circuit breaking current; making, at the rated voltage, circuits to which the rated short-circuit breaking current applies. They are intended to be used for circuits or applications requiring only a normal mechanical and electrical endurance capability. Such applications cover protection of HV/LV transformers for instance, but exclude distribution lines or cables, as well as motor circuits and capacitor bank circuits. Short-circuit conditions with low