BS EN 62275-2015 Cable management systems Cable ties for electrical installations《电缆管理系统 电气设备用电缆接头》.pdf

1、BSI Standards PublicationCable management systems Cable ties for electrical installationsBS EN 62275:2015BS EN 62275:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 62275:2015. It is derived from IEC 62275:2013. It supersedes BS EN 62275:2009 which is withd

2、rawn.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags . The UK participation in its preparation was entrusted to Technical Committee PEL/213, Cable management.A list of orga

3、nizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2

4、015ISBN 978 0 580 76814 9ICS 29.120.10; 29.120.99Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2015.Amendments/corrigenda issued since publicationDate

5、 Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62275 February 2015 ICS 29.120.10; 29.120.99 Supersedes EN 62275:2009 English Version Cable management systems - Cable ties for electrical installations (IEC 62275:2013 , modified) Systmes de cblage - Colliers pour installations lect

6、riques (IEC 62275:2013 , modifie) Kabelfhrungssysteme - Kabelbinder fr elektrische Installationen (IEC 62275:2013 , modifiziert) This European Standard was approved by CENELEC on 2015-01-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions

7、for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists i

8、n three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national

9、 electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portuga

10、l, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000

11、Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62275:2015 E BS EN 62275:2015EN 62275:2015 - 2 - Foreword This document (EN 62275:2015) consists of the text of IEC 62275:2013 prepared by SC 23A “Cable management system

12、s” of IEC/TC 23 “Electrical accessories“, together with the common modifications prepared by CLC/TC 213 “Cable management systems“. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsem

13、ent (dop) 2016-01-19 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-01-19 This document supersedes EN 62275:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC a

14、nd/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Sta

15、ndard IEC 62275:2013 was approved by CENELEC as a European Standard with agreed common modifications. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 62275:2006 NOTE Harmonized as EN 62275:2009 (modified). COMMON MODIFICATIONS Annex A Rep

16、lace Annex A by: BS EN 62275:2015EN 62275:2015 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicat

17、ion. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOT

18、E 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60068-2-6 2007 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 2008 IEC 60695-11-5 2004 Fire

19、 hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 2005 IEC 60216-4-1 2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens EN 60216-4-1 2006 ISO 4892-

20、2 2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps EN ISO 4892-2 2006 ISO 9227 2012 Corrosion tests in artificial atmospheres - Salt spray tests EN ISO 9227 2012 BS EN 62275:2015 2 BS EN 62275:2015EN 62275:2015EN 62275:2015 - 2 - Foreword This document (EN 62

21、275:2015) consists of the text of IEC 62275:2013 prepared by SC 23A “Cable management systems” of IEC/TC 23 “Electrical accessories“, together with the common modifications prepared by CLC/TC 213 “Cable management systems“. The following dates are fixed: latest date by which the document has to be i

22、mplemented at national level by publication of an identical national standard or by endorsement (dop) 2016-01-19 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-01-19 This document supersedes EN 62275:2009. Attention is drawn to the possibili

23、ty that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Cer

24、tain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 62275:2013 was approved by CENELEC as a European Standard with agreed common modifications. In the official version, for Bibliography, the following note has to be added for the standard indicated:

25、IEC 62275:2006 NOTE Harmonized as EN 62275:2009 (modified). COMMON MODIFICATIONS Annex A Replace Annex A by: BS EN 62275:2015EN 62275:2015 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or

26、 in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication ha

27、s been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60068-2-6 2007 Environmental testing -

28、Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 2008 IEC 60695-11-5 2004 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 2005 IEC 60216-4-1 2006 Electrical insulating materials - Thermal endu

29、rance properties - Part 4-1: Ageing ovens - Single-chamber ovens EN 60216-4-1 2006 ISO 4892-2 2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps EN ISO 4892-2 2006 ISO 9227 2012 Corrosion tests in artificial atmospheres - Salt spray tests EN ISO 9227 2012 BS EN

30、 62275:2015 3 BS EN 62275:2015EN 62275:2015 2 62275 IEC:2013 CONTENTS 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 General requirements 7 5 General notes on tests 8 6 Classification . 12 6.1 According to material . 12 6.1.1 Metallic component . 12 6.1.2 Non-metallic component . 12

31、6.1.3 Composite component 12 6.2 According to loop tensile strength for cable ties and mechanical strength for fixing devices 12 6.2.1 Loop tensile strength for cable ties . 12 6.2.2 Type 1 Retains at least 50 % of declared loop tensile strength for cable ties and mechanical strength for fixing devi

32、ces after test conditions . 12 6.2.3 Type 2 Retains 100 % declared loop tensile strength for cable ties and mechanical strength for fixing devices after test conditions . 12 6.3 According to temperature . 13 6.3.1 According to maximum operating temperature for application given in Table 4 13 6.3.2 A

33、ccording to minimum operating temperature for application given in Table 5 13 6.3.3 According to minimum temperature during installation as declared by the manufacturer . 13 6.4 According to contribution to fire for non-metallic and composite cable ties only 13 6.4.1 Flame propagating 13 6.4.2 Non-f

34、lame propagating . 13 6.5 According to environmental influences . 14 6.5.1 According to resistance to ultraviolet light for non-metallic and composite components . 14 6.5.2 According to resistance to corrosion for metallic and composite components . 14 7 Marking and documentation . 14 8 Construction

35、 15 9 Mechanical properties 15 9.1 Requirements 15 9.2 Installation test 15 9.3 Minimum installation temperature test for cable ties . 15 9.4 Minimum operating temperature test for cable ties . 16 9.5 Loop tensile strength test for cable ties classified according to 6.2.2 . 18 9.5.1 As-received cond

36、ition . 18 9.5.2 After heat ageing 18 9.5.3 After temperature cycling 18 BS EN 62275:2015BS EN 62275:201562275 IEC:2013 4 2 62275 IEC:2013 CONTENTS 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 General requirements 7 5 General notes on tests 8 6 Classification . 12 6.1 According to

37、material . 12 6.1.1 Metallic component . 12 6.1.2 Non-metallic component . 12 6.1.3 Composite component 12 6.2 According to loop tensile strength for cable ties and mechanical strength for fixing devices 12 6.2.1 Loop tensile strength for cable ties . 12 6.2.2 Type 1 Retains at least 50 % of declare

38、d loop tensile strength for cable ties and mechanical strength for fixing devices after test conditions . 12 6.2.3 Type 2 Retains 100 % declared loop tensile strength for cable ties and mechanical strength for fixing devices after test conditions . 12 6.3 According to temperature . 13 6.3.1 Accordin

39、g to maximum operating temperature for application given in Table 4 13 6.3.2 According to minimum operating temperature for application given in Table 5 13 6.3.3 According to minimum temperature during installation as declared by the manufacturer . 13 6.4 According to contribution to fire for non-me

40、tallic and composite cable ties only 13 6.4.1 Flame propagating 13 6.4.2 Non-flame propagating . 13 6.5 According to environmental influences . 14 6.5.1 According to resistance to ultraviolet light for non-metallic and composite components . 14 6.5.2 According to resistance to corrosion for metallic

41、 and composite components . 14 7 Marking and documentation . 14 8 Construction 15 9 Mechanical properties 15 9.1 Requirements 15 9.2 Installation test 15 9.3 Minimum installation temperature test for cable ties . 15 9.4 Minimum operating temperature test for cable ties . 16 9.5 Loop tensile strength

42、 test for cable ties classified according to 6.2.2 . 18 9.5.1 As-received condition . 18 9.5.2 After heat ageing 18 9.5.3 After temperature cycling 18 BS EN 62275:201562275 IEC:2013 3 9.6 Loop tensile strength test for cable ties classified according to 6.2.3 . 19 9.6.1 As-received condition . 19 9.

43、6.2 After heat ageing 19 9.6.3 After temperature cycling 19 9.6.4 After vibration test for metallic cable ties 20 9.7 Mechanical strength test for fixing devices . 21 9.7.1 As-received 21 9.7.2 After heat ageing 24 9.7.3 After temperature cycling 24 10 Contribution to fire . 24 11 Environmental infl

44、uences . 27 11.1 Resistance to ultraviolet light . 27 11.2 Resistance to corrosion 29 12 Electromagnetic compatibility 30 Annex A (normative) Compliance checks to be carried out for cable ties and fixing devices complying with IEC 62275:2006 . 31 Bibliography 33 Figure 1 Reference thickness for cabl

45、e ties 9 Figure 2 Typical arrangements for cable tie orientation on split mandrel for tensile test 11 Figure 3 Test apparatus for cable tie impact test 17 Figure 4 Typical arrangement for the vibration test 21 Figure 5 Typical arrangement of test assembly for fixing device test 23 Figure 6 Arrangeme

46、nt for the needle flame test 26 Figure 7 Recommended sample repositioning for ultraviolet light and water exposure . 29 Table 1 Stabilisation time for samples 8 Table 2 Test mandrel diameter . 10 Table 3 Loop tensile strength . 12 Table 4 Maximum operating temperature for application 13 Table 5 Mini

47、mum operating temperature for application . 13 Table 6 Energy values of hammer 18 Table A.1 Required compliance checks 31 BS EN 62275:2015BS EN 62275:201562275 IEC:2013 5 32Annex A (normative) Compliance checks to be carried out for cable ties and fixing devices complying with EN 62275:2009 6 62275

48、IEC:2013 CABLE MANAGEMENT SYSTEMS CABLE TIES FOR ELECTRICAL INSTALLATIONS 1 Scope This International Standard specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installatio

49、ns. Cable ties and associated fixing devices may also be suitable for other applications and where so used, regard should be taken of any additional requirements. This standard does not contain requirements that evaluate any electrical insulation properties of the cable tie or mechanical protection of the cables provided by the cable tie. This standard does not consider the mechanical interface of a fixing device t