BS EN 62282-2-2012 Fuel cell technologies Fuel cell modules《燃料电池技术 燃料电池模件》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFuel cell technologiesPart 2: Fuel cell modulesBS EN 62282-2:2012National forewordThis British Standard is the UK implementation of EN 62282-2:2012. It isidentical to IEC 62282-2

2、:2012. It supersedes BS EN 62282-2:2004 which iswithdrawn.The UK participation in its preparation was entrusted to Technical CommitteeGEL/105, Fuel cell technologies.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to

3、include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012 Published by BSI Standards Limited 2012 ISBN 978 0 580 74607 9 ICS 27.070Compliance with a British Standard cannot confer immunity from legal obligations.This

4、British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62282-2:2012EUROPEAN STANDARD EN 62282-2 NORME EUROPENNE EUROPISCHE NORM August 2012 CENELEC Europea

5、n Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENEL

6、EC members. Ref. No. EN 62282-2:2012 E ICS 27.070 Supersedes EN 62282-2:2004 + A1:2007English version Fuel cell technologies - Part 2: Fuel cell modules (IEC 62282-2:2012) Technologies des piles combustible - Partie 2: Modules piles combustible (CEI 62282-2:2012) Brennstoffzellentechnologien - Teil

7、2: Brennstoffzellenmodule (IEC 62282-2:2012) This European Standard was approved by CENELEC on 2012-04-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alte

8、ration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language

9、 made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Cze

10、ch Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Ki

11、ngdom. BS EN 62282-2:2012EN 62282-2:2012 - 2 - Foreword The text of document 105/378/FDIS, future edition 2 of IEC 62282-2, prepared by IEC/TC 105 “Fuel cell technologies“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62282-2:2012. The following dates are fixed: latest

12、 date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-02-10 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-04-30 This document supersedes EN 62282-2:

13、2004 + A1:2007. EN 62282-2:2012 includes the following significant technical changes with respect to EN 62282-2:2004: - inclusion of definitions for hazards and hazardous locations based on the EN 60079 series; - the general safety strategy is modified to reflect the needs for different application

14、standards. The modifications are in line with similar modifications made to EN 62282-3-100; - the electrical components clause is modified to reflect the needs for different application standards. The modifications are in line with similar modifications made to EN 62282-3-100; - the marking and inst

15、ructions have been enlarged to provide the system integrator with the necessary information. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent r

16、ights. Endorsement notice The text of the International Standard IEC 62282-2:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60812 NOTE Harmonised as EN 6081

17、2. IEC 61025 NOTE Harmonised as EN 61025. IEC 60079-20-1 NOTE Harmonised as EN 60079-20-1. IEC 62282-3-100 NOTE Harmonised as EN 62282-3-100. ISO 1307:2006 NOTE Harmonised as EN ISO 1307:2006 (not modified). ISO 1402:2009 NOTE Harmonised as EN ISO 1402:2009 (not modified). BS EN 62282-2:2012- 3 - EN

18、 62282-2:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edi

19、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60079

20、Series Explosive atmospheres EN 60079 Series IEC 60079-10 Series Explosive atmospheres - Part 10: Classification of areas EN 60079-10 Series IEC 60204-1 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements EN 60204-1 - IEC 60335-1 - Household and similar electrical

21、 appliances Safety - Part 1: General requirements EN 60335-1 - IEC 60352 Series Solderless connections EN 60352 Series IEC 60512-15 Series Connectors for electronic equipment - Tests and measurements - Part 15:Connector tests (mechanical) EN 60512-15 Series IEC 60512-16 Series Connectors for electro

22、nic equipment - Tests and measurements - Part 16: Mechanical tests on contacts and terminations EN 60512-16 Series IEC 60529 - Degrees of protection provided by enclosures (IP Code) EN 60529 - IEC 60617 Graphical symbols for diagrams - - IEC 60695 Series Fire hazard testing EN 60695 Series IEC 60730

23、-1 - Automatic electrical controls for household and similar use - Part 1: General requirements EN 60730-1 - IEC 60950-1 - Information technology equipment - Safety - Part 1: General requirements EN 60950-1 - IEC 61508 Series Functional safety of electrical/electronic/programmable electronic safety-

24、related systems EN 61508-1 Series IEC 62040-1 - Uninterruptible Power Systems (UPS) - Part 1: General and safety requirements for UPS EN 62040-1 - IEC 62061 - Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems EN 62061 - ISO 1

25、3849-1 - Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design EN ISO 13849-1 - BS EN 62282-2:2012EN 62282-2:2012 - 4 - Publication Year Title EN/HD Year ISO 23550 - Safety and control devices for gas burners and gas-burning appliances - General requir

26、ements - - Electronic equipment for use in power installations EN 50178 - BS EN 62282-2:2012 2 62282-2 IEC:2012 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 8 3 Terms and definitions . 9 4 Requirements . 12 4.1 General safety strategy . 12 4.2 Design requirements . 14 4.2.1 General

27、 . 14 4.2.2 Behaviour at normal and abnormal operating conditions 14 4.2.3 Leakage 14 4.2.4 Pressurized operation 14 4.2.5 Fire and ignition. 15 4.2.6 Safeguarding . 16 4.2.7 Piping and fittings 16 4.2.8 Electrical components . 17 4.2.9 Terminals and electrical connections . 17 4.2.10 Live parts 18

28、4.2.11 Insulating materials, dielectric strength 18 4.2.12 Bonding . 18 4.2.13 Shock and vibration . 18 5 Type tests 19 5.1 General . 19 5.2 Shock and vibration test 19 5.3 Gas leakage test . 19 5.4 Normal operation . 20 5.5 Allowable working pressure test 21 5.6 Pressure withstanding test of coolin

29、g system 21 5.7 Continuous and short-time electrical rating 21 5.8 Overpressure test 21 5.9 Dielectric strength test . 22 5.10 Differential pressure test . 23 5.11 Gas leakage test (repeat) 24 5.12 Normal operation (repeat) . 24 5.13 Flammable concentration test 24 5.14 Tests of abnormal conditions

30、. 24 5.14.1 General . 24 5.14.2 Fuel starvation test 25 5.14.3 Oxygen/oxidant starvation test . 25 5.14.4 Short-circuit test 25 5.14.5 Lack of cooling/impaired cooling test . 25 5.14.6 Crossover monitoring system test 26 5.14.7 Freeze/thaw cycle tests . 26 6 Routine tests 26 6.1 General . 26 6.2 Gas

31、-tightness test . 26 BS EN 62282-2:201262282-2 IEC:2012 3 6.3 Dielectric strength withstand test . 27 7 Markings and instructions . 27 7.1 Nameplate . 27 7.2 Marking . 27 7.3 Warning label 27 7.4 Documentation 27 7.4.1 General . 27 7.4.2 Installation manual 29 7.4.3 Installation diagram . 29 7.4.4 O

32、peration manual 30 7.4.5 Maintenance manual . 30 7.4.6 Parts list 30 Annex A (informative) Additional information for the performance and evaluation of the tests . 32 Annex B (informative) List of notes concerning particular conditions in certain countries . 38 Bibliography 39 Figure 1 Fuel cell sys

33、tem components and scope of standard 8 Table 1 Dielectric strength test voltages (derived from EN 50178) . 23 Table A.1 Viscosity of gases at one atmosphere 35 BS EN 62282-2:2012 6 62282-2 IEC:2012 INTRODUCTION Fuel cell modules are electrochemical devices which convert continuously supplied fuel, s

34、uch as hydrogen or hydrogen rich gases, alcohols, hydrocarbons and oxidants to d.c. power, heat, water and other by-products. Fuel cell modules are sub-assemblies that are integrated into end-use products incorporating one or more fuel cell stacks and, if applicable, additional components. BS EN 622

35、82-2:201262282-2 IEC:2012 7 FUEL CELL TECHNOLOGIES Part 2: Fuel cell modules 1 Scope This part of IEC 62282 provides the minimum requirements for safety and performance of fuel cell modules and applies to fuel cell modules with the following electrolyte chemistry: alkaline; polymer electrolyte (incl

36、uding direct methanol fuel cells)1; phosphoric acid; molten carbonate; solid oxide; aqueous solution of salts. Fuel cell modules can be provided with or without an enclosure and can be operated at significant pressurization levels or close to ambient pressure. This standard deals with conditions tha

37、t can yield hazards to persons and cause damage outside the fuel cell modules. Protection against damage inside the fuel cell modules is not addressed in this standard, provided it does not lead to hazards outside the module. These requirements may be superseded by other standards for equipment cont

38、aining fuel cell modules as required for particular applications. This standard does not cover road vehicle applications. This standard is not intended to limit or inhibit technological advancement. An appliance employing materials or having forms of construction differing from those detailed in the

39、 requirements of this standard may be examined and tested according to the purpose of these requirements and, if found to be substantially equivalent, may be considered to comply with this standard. The fuel cell modules are components of final products. These products require evaluation to appropri

40、ate end-product safety requirements. 1Also known as proton exchange membrane fuel cell. BS EN 62282-2:2012 8 62282-2 IEC:2012 System boundary Power inputs Electrical Thermal Useable heat Mechanical Waste heat Fuel Useable power electrical mechanical Oxidant Condensate Ventilation Inert gas Exhaust g

41、ases Water EMI noise EMD vibration vibration, wind, rain, temperature etc. Fuel cell power system Automatic Ventilation system system system Oxidant system Thermal management Fuel processing processing Fuel cell module Power conditioning system system system Water treatment system Internal power nee

42、ds control Energy to elec./mech. conversion Scope IEC 331/12 Key EMD electromagnetic disturbance EMI electromagnetic interference Figure 1 Fuel cell system components This standard covers only up to the d.c. output of the fuel cell module. This standard does not apply to peripheral devices as illust

43、rated in Figure 1. This standard does not cover the storage and delivery of fuel and oxidant to the fuel cell module. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only

44、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60079 (all parts), Explosive atmospheres IEC 60079-10 (all Parts 10), Explosive atmospheres Part 10: Classification of areas IEC 60204-1, Safety of machinery Elec

45、trical equipment of machines Part 1: General requirements IEC 60335-1, Household and similar electrical appliances Safety Part 1: General requirements IEC 60352 (all parts), Solderless connections IEC 60512-15 (all parts), Connectors for electronic equipment Tests and measurements Part 15: Connector

46、 tests (mechanical) BS EN 62282-2:201262282-2 IEC:2012 9 IEC 60512-16 (all parts) Connectors for electronic equipment Tests and measurements Part 16: Mechanical tests on contacts and terminations IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60617, Graphical symbols for diagr

47、ams IEC 60695 (all parts), Fire hazard testing IEC 60730-1, Automatic electrical controls for household and similar use Part 1: General requirements IEC 60950-1, Information technology equipment Safety Part 1: General requirements IEC 61508 (all parts), Functional safety of electrical/electronic/pro

48、grammable electronic safety-related systems IEC 62040-1, Uninterruptible power systems (UPS) Part 1: General and safety requirements for UPS IEC 62061, Safety of machinery Functional safety of safety-related electrical, electronic and programmable electronic control systems ISO 13849-1, Safety of ma

49、chinery Safety related parts of control systems Part 1: General principles for design ISO 23550, Safety and control devices for gas burners and gas-burning appliances General requirements EN 50178, Electronic equipment for use in power installations 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 acceptance test contractual test to prove to the customer that the item meets certain conditions of