BS EN 62317-14-2008 Ferrite cores - Dimensions - EFD-cores for use in power supply applications《铁氧体磁芯 尺寸 电源设施中使用的EFD芯》.pdf

1、Ferrite cores Dimensions Part 14: EFD-cores for use in power supply applicationsBS EN 62317-14:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2009 09:06, Uncontroll

2、ed Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 62317-14:2008. It isidentical to IEC 62317-14:2008.The UK participation in its preparation was entrusted to Technical CommitteeEPL/51, Transformers, inductors, magnetic components and ferrite materials.A list of or

3、ganizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 200IISBN 978 0 580 58759 7ICS 29.100.10BRITISH STANDARDBS EN 62317-14:20

4、089Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 March 2009 Amendments issued since publicationAmd. No. Date Text affectedLicensed Copy: Wang Bin, ISO/EXCHANG

5、E CHINA STANDARDS, 07/07/2009 09:06, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 62317-14 NORME EUROPENNE EUROPISCHE NORM October 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung C

6、entral Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62317-14:2008 E ICS 29.100.10 English version Ferrite cores - Dimensions - Part 14: EFD-cores for use in power supply a

7、pplications (IEC 62317-14:2008) Noyaux ferrites - Dimensions - Partie 14 : Noyaux EFD utiliss dans des applications dalimentation lectrique (CEI 62317-14:2008) Ferritkerne - Mae - Teil 14: EFD-Kerne fr Stromversorgungsanwendungen (IEC 62317-14:2008) This European Standard was approved by CENELEC on

8、2008-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may

9、be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to t

10、he Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb

11、ourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62317-14:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2009 09:06, Uncontrolled Copy, (c) BSIEN 62317-14:2008 - 2 - Foreword The text of do

12、cument 51/934/FDIS, future edition 1 of IEC 62317-14, prepared by IEC TC 51, Magnetic components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62317-14 on 2008-09-01. The following dates were fixed: latest date by which the EN has to be imple

13、mented at national level by publication of an identical national standard or by endorsement (dop) 2009-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-09-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Internationa

14、l Standard IEC 62317-14:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 62317-14:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2009 09:06, Uncontrolled Copy, (c) BSI- 3 - EN 62317-14:2008 Annex ZA (normative) Normative references to internatio

15、nal publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendm

16、ents) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60205 - 1)Calculation of the effective parameters of magnetic piece parts EN 60205 2006 2)IEC 62317-1 - 1)Ferrite cor

17、es - Dimensions - Part 1: General specification EN 62317-1 2007 2)1)Undated reference. 2)Valid edition at date of issue. BS EN 62317-14:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2009 09:06, Uncontrolled Copy, (c) BSI 2 62317-14 IEC:2008(E) CONTENTS FOREWORD.3 1 Scope.5 2 Norma

18、tive references5 3 Primary standards.5 3.1 Dimensions of EFD-cores 5 3.1.1 Principal dimensions5 3.1.2 Effective parameter and Aminvalues 7 3.2 Main dimensions for coil formers7 3.3 Pin locations and base outlines8 3.4 Pin diameter 9 4 Mounting 9 Annex A (informative) EFDcore design .10 Figure 1 Dim

19、ensions of EFD-cores .6 Figure 2 Main dimensions of coil formers for EFD-cores .7 Figure 3 Pin location (SMD type) viewed from the upper side of the board.8 Figure 4 Pin locations (PTH type) viewed from the upper side of the board .9 Table 1 Dimensions of EFD-cores 6 Table 2 Effective parameter and

20、Aminvalues for EFD-cores7 Table 3 Main dimensions of coil formers for EFD-cores 7 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2009 09:06, Uncontrolled Copy, (c) BSI62317-14 IEC:2008(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FERRITE CORES DIMENSIONS Part 14: EFD-cores for use

21、in power supply applications FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions

22、concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“).

23、 Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborat

24、es closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the

25、 relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that

26、 the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the ma

27、ximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsi

28、ble for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical

29、committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publi

30、cations. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

31、patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62317-14 has been prepared IEC technical committee 51: Magnetic components and ferrite materials. The text of this standard is based on the following documents: FDIS Report on v

32、oting 51/934/FDIS 51/938/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62317 series, under the

33、 general title Ferrite cores Dimensions, can be found on the IEC website. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2009 09:06, Uncontrolled Copy, (c) BSI 4 62317-14 IEC:2008(E) The committee has decided that the contents of this publication will remain unchanged until the mainten

34、ance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this standard may be issued at a later date. L

35、icensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2009 09:06, Uncontrolled Copy, (c) BSI62317-14 IEC:2008(E) 5 FERRITE CORES DIMENSIONS Part 14: EFD-cores for use in power supply applications 1 Scope This part of IEC 62317 specifies the dimensions that are of importance for mechanical inte

36、rchangeability for a preferred range of EFD-cores, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them. The selection of core sizes for this standard is based on the philosophy of including those sizes which are

37、industrial standards, either by inclusion in national standards, or by broad-based use in industry. See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included. The general considerations that the design of this range of cores is based upon are given in Annex A.

38、2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60205, Calculation of

39、the effective parameters of magnetic piece parts IEC 62317-1, Ferrite cores Dimensions Part 1: General specification 3 Primary standards Compliance with the following requirements ensures mechanical interchangeability of complete assemblies and wound coil formers. 3.1 Dimensions of EFD-cores 3.1.1 P

40、rincipal dimensions The principal dimensions of EFD-cores shall be as given in Figure 1 and Table 1. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2009 09:06, Uncontrolled Copy, (c) BSI 6 62317-14 IEC:2008(E) KaC F2F1EA BDq KaF2CF1EA q B D IEC 1466/08 aThe K dimension designates, with

41、 respect to the base level of the core, the difference in height between the base level of the core and the underside of the centre leg. In the typical case, the underside of the centre leg is above the base level of the core, and the value of K is positive. In the case that the underside of the cen

42、tre leg is below the base level of the core, then the value of K will be negative. a) EFD 10/5/3, EFD 12/6/3,5 and EFD 15/8/5 b) EFD 20/10/7, EFD 25/13/9 and EFD 30/15/9Figure 1 Dimensions of EFD-cores Table 1 Dimensions of EFD-cores Size A mm B mm C mm D mm E mm F1mm F2mm Kamm q mm EFD 10/5/3 Min.

43、Max. 10,20 10,80 5,10 5,30 2,60 2,80 3,60 3,90 7,40 7,90 4,40 4,70 1,40 1,50 -0,20 0,20 EFD 12/6/3,5 Min. Max. 12,20 12,80 6,10 6,30 3,40 3,60 4,40 4,70 8,75 9,25 5,25 5,55 1,90 2,10 -0,20 0,20 EFD 15/8/5 Min. Max. 14,60 15,40 7,35 7,65 4,50 4,80 5,25 5,75 10,65 11,35 5,15 5,45 2,30 2,50 -0,20 0,45

44、EFD 20/10/7 Min. Max. 19,45 20,55 9,85 10,15 6,50 6,80 7,45 7,95 14,90 15,90 8,70 9,10 3,45 3,75 0,17 0,75 EFD 25/13/9 Min. Max. 24,35 25,65 12,35 12,65 8,90 9,30 9,05 9,55 18,10 19,30 11,20 11,60 5,05 5,35 0,60 1,00 EFD 30/15/9 Min. Max. 29,20 30,80 14,85 15,15 8,90 9,30 10,90 11,50 21,65 23,15 14,

45、35 14,85 4,75 5,05 0,75 1,00 NOTE The dimensions of the cores may be checked by means of gauges. aThe K dimension designates, with respect to the base level of the core, the difference in height between the base level of the core and the underside of the centre leg. In the typical case, the undersid

46、e of the centre leg is above the base level of the core, and the value of K is positive. In the case that the underside of the centre leg is below the base level of the core, then the value of K will be negative. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2009 09:06, Uncontrolled C

47、opy, (c) BSI62317-14 IEC:2008(E) 7 3.1.2 Effective parameter and Aminvalues The effective parameter values for cores having the dimensions given in 3.1.1 are as shown in Table 2. Table 2 Effective parameter and Aminvalues for EFD-cores Size C1mm1C2mm3Aemm2lemm Vemm3Aminamm2EFD 10/5/3 3,301 8 0,459 5

48、0 7,19 23,7 170 6,52 EFD 12/6/3,5 2,495 8 0,218 71 11,4 28,5 325 10,7 EFD 15/8/5 2,263 3 0,149 51 15,1 34,3 519 12,3 EFD 20/10/7 1,536 6 0,050 025 30,7 47,2 1 450 30,6 EFD 25/13/9 0,995 25 0,017 301 57,5 57,3 3 290 57,3 EFD 30/15/9 0,980 56 0,014 147 69,3 68,0 4 710 69,2 aSee 2.2 of IEC 60205. 3.2 M

49、ain dimensions for coil formers The main dimensions of coil formers suitable for use with a pair of EFD-cores shall be as given in Figure 2 and Table 3. f1S1S1S2S2e d R 4 C 4 f2S1S1IEC 1467/08 Figure 2 Main dimensions of coil formers for EFD-cores Table 3 Main dimensions of coil formers for EFD-cores e mm f1mm f2mm d mm S1mm S2mm Camm R mm Size Max. Min. Min. Max. Min. Min. Nom. Nom. EFD 10/5/3 7,3 4,8 1,6 7,1 0,35 0,30