BS EN 62343-1-2016 Dynamic modules Performance standards General conditions《动态模块 性能标准 一般条件》.pdf

1、Dynamic modulesPart 1: Performance standards General conditionsBS EN 62343-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62343-1:2016. It isidentical to IEC 62343-1:2016.The UK participatio

2、n in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems and active devices.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necess

3、ary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87436 9ICS 33.180.01; 33.180.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Sta

4、ndard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62343-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62343-1 July 2016 ICS 33.180.01; 33.180.99 Engl

5、ish Version Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-1:2016) Modules dynamiques - Partie 1 : Normes de performance - Conditions gnrales (IEC 62343-1:2016) Dynamische Module - Teil 1: Betriebsverhaltensnorm - Allgemeine Bedingungen (IEC 62343-1:2016) This Europe

6、an Standard was approved by CENELEC on 2016-03-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

7、concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENEL

8、EC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

9、Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardi

10、zation Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62343-1:20

11、16 E BS EN 62343-1:2016EN 62343-1:2016 2 European foreword The text of document 86C/1312/CDV, future edition 1 of IEC 62343-1, prepared by SC 86C “Fibre optic systems and active devices“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62343-1:

12、2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-01-15 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019

13、-07-15 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62343-1:2016 was

14、approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62343 NOTE Harmonized as EN 62343. IEC 62343-1 (series) NOTE Harmonized as EN 62343-1 (series). IEC 62343-2 NOTE Harmo

15、nized as EN 62343-2. BS EN 62343-1:2016EN 62343-1:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its appl

16、ication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.

17、 NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year ITU-T G.694-1 - Spectral grids for WDM applications: DWDM frequency grid - - BS EN 62343-1:2016 2 IEC 62343-1:2016 IEC 2016 CONTEN

18、TS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Requirements of operating conditions 6 4 Requirements of operating wavelength range (spectral band) . 7 Annex A (informative) Recommendations for other conditions on product specifications 8 A.1 Storage environmental conditions 8

19、 A.2 Absolute maximum ratings . 8 Bibliography . 9 Table 1 Operating conditions 7 Table 2 Spectral bands 7 Table A.1 Storage environmental conditions (typical) 8 Table A.2 Absolute maximum rating items (minimum list) 8 BS EN 62343-1:2016IEC 62343-1:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMM

20、ISSION _ DYNAMIC MODULES Part 1: Performance standards General conditions FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote int

21、ernational co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereaf

22、ter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also partic

23、ipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an

24、international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all r

25、easonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply

26、 IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of co

27、nformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publi

28、cation. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect,

29、or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the corr

30、ect application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62343-1 has been prepared b

31、y subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: CDV Report on voting 86C/1312/CDV 86C/1352/RVC Full information on the voting for the approval of this standard can be found in the

32、report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62343 series, published under the general title Dynamic modules, can be found on the IEC website. BS EN 62343-1:2016 4 IEC 62343-1:2016 I

33、EC 2016 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by

34、 a revised edition, or amended. A bilingual version of this publication may be issued at a later date. BS EN 62343-1:2016IEC 62343-1:2016 IEC 2016 5 INTRODUCTION Performance standards define standard electrical and optical performance under a set of prescribed conditions and contain a series or a se

35、t of tests and measurements with clearly defined conditions, severities and pass/fail criteria. The tests are intended to be run on initial design verification to prove the products ability to satisfy the requirements of a specific application, market sector or user group. Performance standards do n

36、ot specify the requirements on reliability, which is defined in IEC 62343-2. BS EN 62343-1:2016 6 IEC 62343-1:2016 IEC 2016 DYNAMIC MODULES Part 1: Performance standards General conditions 1 Scope This part of IEC 62343 provides a performance standard of general conditions for dynamic modules. All d

37、ynamic modules should satisfy required performance defined in individual performance standards on the general conditions defined in this document. Additional conditions may be included in individual performance standards. 2 Normative references The following documents, in whole or in part, are norma

38、tively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ITU-T G. 694.1, Spectral grids for WDM applications: DWDM freq

39、uency grid 3 Requirements of operating conditions Dynamic modules are generally installed in optical transmission equipment located in central offices that have a temperature and humidity controlled environment. It is required that all dynamic modules satisfy their required performance at the genera

40、l conditions specified in this standard. Table 1 specifies the minimum requirements of operating conditions for dynamic modules and devices for commercial use. All performance parameters shall satisfy the specifications defined in relevant performance standards on the operating condition in Table 1,

41、 unless otherwise stated. BS EN 62343-1:2016IEC 62343-1:2016 IEC 2016 7 Table 1 Operating conditions Items Conditions Operating temperature range -5 C to 70 C, case temperatureaOperating relative humidity range Under consideration Operating vibrationbFrequency: 5 Hz to 100 Hz, Acceleration: 1,0 g (9

42、,8 m/s2) or amplitude of 3 mm maximum, Sweep: 0,1 octave/min. 3 axis Frequency: 100 Hz to 200 Hz Acceleration: 2,0 g (19,8 m/s2) Sweep: 8 octave/min. 3 axis Operating shock Maximum input power Depending on individual performance standard aA position to measure the temperature on the surface of a mod

43、ule shall be defined. When a dynamic module does not emit heat, a position may not need to be defined. bThis operating vibration condition is based on a market survey result given in IEC TR 62343-6-5. 4 Requirements of operating wavelength range (spectral band) All individual performance standards s

44、hall define operating wavelength range to refer the spectral bands defined in ITU-T G. 694.1 as given in Table 2. Table 2 Spectral bands Band Descriptor Range nm O-band Original 1 260 to 1 360 E-band Extended 1 360 to 1 460 S-band Short wavelength 1 460 to 1 530 C-band Conventional 1 530 to 1 565 L-

45、band Long wavelength 1 565 to 1 625 U-band Ultra long wavelength 1 625 to 1 675 BS EN 62343-1:2016 8 IEC 62343-1:2016 IEC 2016 Annex A (informative) Recommendations for other conditions on product specifications A.1 Storage environmental conditions Storage environmental conditions are defined in rel

46、evant product specifications. Table A.1 shows the typical storage environmental conditions for dynamic modules and devices for commercial use. Non-operating test conditions which are defined in performance specifications are decided to consider these storage environmental conditions. Table A.1 Stora

47、ge environmental conditions (typical) Items Conditions Storage temperature range -40 C to 70 C, ambient Storage relative humidity range 5 % to 85 % RH The absolute humidity is within 24 g per 1 kg dry air. Non-operating shock (for components) 5 000 m/s2, 1 ms, half sine, for less than or equal to 0,

48、125 kg weight Non-operating shock (for modules) 2 000 m/s2, 1,33 ms, half sine for more than 0,125 kg weight, and less than or equal to 0,225 kg weight 500 m/s2, 5 ms, half sine for more than 0,225 kg weight, and less than or equal to 1 kg weight Non-operating vibration 10 Hz to 55 Hz for frequency;

49、 1,52 mm for amplitude Non-operating impact (drop, for modules) 100 mm height for more than 1 kg, and less than or equal to 10 kg weight; 75 mm height for more than 10 kg, and less than or equal to 25 kg weight. Transportation impact (drop, packed) 1 m height Transportation vibration (packed) 5 Hz to 20 Hz for frequency; 0,1 m/s2/Hz (2 m/s2at 20 Hz) 20 Hz to 200 Hz, -3 dB/octave A.2 Absolute maximum ratings Absolute maximum ratings are defined in relevant product specificatio