BS EN 62376-2011 Maritime navigation and radiocommunication equipment and systems Electronic chart system (ECS) Operational and performance requirements methods of testing and requ.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationMaritime navigation and radiocommunication equipment and systems Electronic chart system (ECS) Operational and performance requirements, methods of testing and required test resu

2、ltsBS EN 62376:2011National forewordThis British Standard is the UK implementation of EN 62376:2011. It is identical to IEC 62376:2010.The UK participation in its preparation was entrusted to Technical Committee EPL/80, Maritime navigation and radiocommunication equipment and systems.A list of organ

3、izations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 54320 3 ICS 47.020.70Compliance with a British Standar

4、d cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62376:2011EUROPEAN STANDARD EN 62376 NORME EUROPEN

5、NE EUROPISCHE NORM February 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any fo

6、rm and by any means reserved worldwide for CENELEC members. Ref. No. EN 62376:2011 E ICS 47.020.70 English version Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results

7、 (IEC 62376:2010) Matriels et systmes de navigation et de radiocommunication maritimes - Systme constitu par les cartes lectroniques (ECS) - Exigences dexploitation et de fonctionnement, mthodes dessai et rsultats dessai exigs (CEI 62376:2010) Navigations- und Funkkommunikationsgerte und -systeme fr

8、 die Seeschifffahrt - Elektronisches Kartensystem (ECS) - Betriebs- und Leistungsanforderungen, Prfverfahren und geforderte Prfergebnisse (IEC 62376:2010) This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

9、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European S

10、tandard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the na

11、tional electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, S

12、pain, Sweden, Switzerland and the United Kingdom. BS EN 62376:2011EN 62376:2011 - 2 - Foreword The text of document 80/598/FDIS, future edition 1 of IEC 62376, prepared by IEC/TC 80, Maritime navigation and radiocommunication equipment and systems, was submitted to the IEC-CENELEC parallel vote and

13、was approved by CENELEC as EN 62376 on 2011-01-02. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest

14、 date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-10-02 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-01-02 Annex ZA has been added by CENELEC. _ Endorsemen

15、t notice The text of the International Standard IEC 62376:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61162 series NOTE Harmonized in EN 61162 series (no

16、t modified). IEC 61162-2 NOTE Harmonized as EN 61162-2. IEC 61993-2:2002 NOTE Harmonized as EN 61993-2:2002 (not modified). IEC 62252:2004 NOTE Harmonized as EN 62252:2004 (not modified). IEC 62287-1:2006 NOTE Harmonized as EN 62287-1:2006 (not modified). ISO 9241-12:1998 NOTE Harmonized as EN ISO 9

17、241-12:1998 (not modified). _ BS EN 62376:2011- 3 - EN 62376:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, on

18、ly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year

19、IEC 60945 2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results EN 60945 2002 IEC 61162-1 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple

20、 listeners EN 61162-1 - IEC 61162-3 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3: Serial data instrument network EN 61162-3 - IEC 61174 2008 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information

21、 system (ECDIS) - Operational and performance requirements, methods of testing and required test results EN 61174 2008 IEC 62288 2008 Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General require

22、ments, methods of testing and required test results EN 62288 2008 IEC 62388 2007 Maritime navigation and radio-communication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results EN 62388 2008 IHO S-52 Annex A 2008 IHO Presentation Library f

23、or ECDIS - - IHO S-60 2003 Users Handbook on Datum Transformations involving WGS 84 - - IHO S-61 1999 Product specification for raster navigational charts (RNC) - - BS EN 62376:2011 2 62376 IEC:2010(E) CONTENTS 1 Scope.5 2 Normative references 5 3 Terms and definitions 6 4 General requirements 8 4.1

24、 Application of IEC 60945 8 4.1.1 Requirements . 8 4.1.2 Methods of test and required results.10 4.2 Application of IEC 62288 13 4.2.1 Requirements . 13 4.2.2 Methods of test and required results.18 5 Operational and performance requirements . .19 5.1 Chart information. 19 5.1.1 Provision of chart i

25、nformation . .19 5.1.2 Replacing an electronic chart database . 19 5.1.3 Automatically updating an electronic chart database. 19 5.1.4 Displaying the electronic chart database. .20 5.1.5 Displaying metadata . .21 5.1.6 Adjusting for differences in horizontal datum . .21 5.2 Position monitoring22 5.2

26、.1 Deriving own ships position . .22 5.2.2 Displaying own ships position . 22 5.2.3 Displaying own ships past track 23 5.3 Voyage related operation . .23 5.3.1 Route planning . 23 5.3.2 Route monitoring 24 5.3.3 Voyage recording .26 5.3.4 Distance and azimuth 26 5.4 Connections with other equipment2

27、7 5.4.1 General . 27 5.4.2 Electronic position-fixing system. 27 5.4.3 Heading sensor 29 5.4.4 Speed and distance measuring equipment.29 5.4.5 Echosounding equipment. .30 5.4.6 Radar target tracking system . 30 5.4.7 Automatic identification system31 Annex A (informative) Guidance for testing .32 Bi

28、bliography. 35 Table 1 IEC 60945 requirements.8 Table 2 IEC 60945 methods of testing .10 Table 3 IEC 62288 requirements.13 BS EN 62376:201162376 IEC:2010(E) 5 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS Electronic chart system (ECS) Operational and performance requirements, meth

29、ods of testing and required test results 1 Scope This International Standard specifies the minimum operational and performance requirements and methods of testing for ECS. ECSs are designed or adapted for use as navigation information systems on vessels not required to comply with Chapter V of the I

30、nternational Convention for the Safety of Life at Sea (SOLAS). Different types of vessels, for example, a non-SOLAS passenger vessel, a small fishing vessel or a recreational vessel, which operate in different environments, need to be equipped with navigational systems providing functionality to mee

31、t their needs. If the full functionality of ECDIS according to IEC 61174 is considered to be unnecessary, ECS may be suitable for a navigation information system for these vessels. Governments may consider requiring the carriage of ECS for these vessels under local arrangements. In order to provide

32、a standard that can be used to apply different levels of navigational functionality, three classes of ECS are defined. Class “A” ECS are designed or adapted for use as a primary navigation information system. Class “B” ECS are designed or adapted for use as a navigation information system where less

33、 navigational functionality is required than Class “A”. Class “C” ECS are designed or adapted for use as a navigation information system with minimal functionality intended to plot and monitor a vessels position. Within this International Standard, the beginning of each paragraph indicates the appli

34、cability to ECS Class(es). Paragraphs marked “(A B C)” apply to all Classes; paragraphs marked “(A B)” or “(B C)” apply only to those specific combinations of Classes; and paragraphs marked “(A)”, “(B)” or “(C)” apply only to those individual Classes. For a Class “A” and Class “B” ECS, adequate back

35、-up arrangements may be required to ensure safe navigation in the event of an ECS failure. For a Class “A” ECS, an additional Class “A” ECS may be used as the back-up. Alternatively, Class “B” ECS are intended to meet the minimum requirements for adequate back-up arrangements for Class “A” ECS. For

36、a Class “B” ECS, an additional Class “B” ECS may be used as the back-up. Class “C” ECS are not intended to meet the minimum requirements for adequate back-up arrangements for Class “A” or Class “B” ECS. Guidance for testing ECS is given in Annex A. 2 Normative references The following referenced doc

37、uments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. BS EN 62376:2011 6 62376 IEC:2010(E) IEC 60945:2002, Maritime navigation and

38、radiocommunication equipment and systems General requirements Methods of testing and required test results IEC 61162-1, Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 1: Single talker and multiple listeners IEC 61162-3, Maritime navigation and radiocommunica

39、tion equipment and systems Digital interfaces Part 3: Serial data instrument network IEC 61174:2008, Maritime navigation and radiocommunication equipment and systems Electronic chart display and information system (ECDIS) Operational and performance requirements, methods of testing and required test

40、 results IEC 62288:2008, Maritime navigation and radiocommunication equipment and systems Presentation of navigation related information on shipborne navigational displays General requirements, methods of testing and required test results IEC 62388:2007, Maritime navigation and radiocommunication eq

41、uipment and systems Shipborne radar Performance requirements, methods of testing and required test results IHO S-52 Annex A:2008, IHO ECDIS Presentation Library IHO S-60:2003 (as amended through 2008), Users handbook on datum transformation involving WGS 84 IHO S-61:1999, Product specification for r

42、aster navigational charts 3 Terms and definitions For the purposes of this document the following terms and definitions apply. 3.1 automatic identification system AIS system which complies with the requirements set forth in Annex 3 to IMO resolution MSC.74(69) and further specified in IEC 61993-2 (i

43、.e. for AIS Class-A) or IEC 62287-1 (i.e. for AIS Class-B “CS”) 3.2 consistent common reference point CCRP location on own ship to which measurements such as own ship position, heading, attitude, and target range, bearing, relative course, relative speed, closest point of approach (CPA) or time to c

44、losest point of approach (TCPA) are referenced, typically the conning position of the ship NOTE An alternative location (or multiple locations) may be used as necessary where clearly indicated or distinctively obvious, for example, the origin of the reference axis of the ship. 3.3 electronic chart d

45、isplay and information system ECDIS navigation information system which, with adequate back-up arrangements, can be accepted as complying with the up-to-date chart required by regulations V/19 and V/27 of the 1974 SOLAS Convention, as amended, by displaying selected information from a system electro

46、nic navigational chart (SENC) with positional information from navigation sensors to assist the mariner in route planning and route monitoring, and, if required, display additional navigation-BS EN 62376:201162376 IEC:2010(E) 7 related information as set forth in IMO resolution MSC.232(82) and furth

47、er specified in IEC 61174 3.4 ECDIS display base level of information which cannot be removed from the ECDIS display, consisting of information which is required at all times in all geographic areas and all circumstances NOTE It is not intended to be sufficient for safe navigation. 3.5 ECDIS standar

48、d display level of information that should be shown when a chart is first displayed on ECDIS NOTE The level of the information it provides for route planning or route monitoring may be modified by the user according to the users needs. 3.6 electronic chart system ECS navigation information system wh

49、ich complies with the requirements specified in this standard but does not comply with all of the requirements specified for ECDIS 3.7 electronic chart database standards-compliant electronic chart database derived from Nautical Charts and Nautical Publications (for example, ENCs, RNCs, and ISO 19379 ECS databases) 3.8 electronic navigational chart ENC database standardised as to content, structure and format according to IHO S-57 Appendix B.1 and iss