BS EN 62453-301-2009 Field device tool (FDT) interface specification - Communication profile integration - IEC 61784 CPF 1《现场设备工具(FDT)接口规范 通讯属性集成 IEC 61784 CPF 1》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 301: Communication profile integration IEC 61784 CPF 1BS EN 62453-301:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARD

2、S, 14/04/2010 08:39, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 62453-301:2009. It isidentical to IEC 62453-301:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement

3、and control, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62560 2IC

4、S 25.040.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH

5、STANDARDBS EN 62453-301:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 08:39, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 62453-301 NORME EUROPENNE EUROPISCHE NORM October 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation El

6、ectrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62453-301:2009 E ICS 25.040.40; 35.100.05; 35.110 Englis

7、h version Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1 (IEC 62453-301:2009) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 301: Intgration des profils de communication - CEI 61784 CPF 1 (CEI 62453-30

8、1:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 301: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 1 nach IEC 61784 (IEC 62453-301:2009) This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/CENE

9、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any C

10、ENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versio

11、ns. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,

12、Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62453-301:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 08:39, Uncontrolled Copy, (c) BSIEN 62453-301:2009 - 2 - Foreword The text of document 65E/125/FDIS, future edition 1 of IEC 62453-301, prepare

13、d by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-301 on 2009-08-01. Each part of the EN 62453-3xy series is intended to be read in c

14、onjunction with EN 62453-2. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn

15、 (dow) 2012-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62453-301:2009 was approved by CENELEC as a European Standard without any modification. _ BS EN 62453-301:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 08:39,

16、 Uncontrolled Copy, (c) BSI- 3 - EN 62453-301:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition

17、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61158-2 1)I

18、ndustrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition EN 61158-2 20082)IEC 61158-3-1 1)Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements EN 61158-3-1 20082)IE

19、C 61158-4-1 2007 Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements EN 61158-4-1 2008 IEC 61158-5-5 1)Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 el

20、ements EN 61158-5-5 20082)IEC 61158-5-9 1)Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements EN 61158-5-9 20082)IEC 61158-6-5 1)Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protoc

21、ol specification - Type 5 elements EN 61158-6-5 20082)IEC 61158-6-9 1)Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements EN 61158-6-9 20082)IEC 61784-1 1)Industrial communication networks - Profiles - Part 1: Fieldbus pr

22、ofiles EN 61784-1 20082)IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 ISO/IEC 646 1)Information technology -

23、 ISO 7-bit coded character set for information interchange - - 1)Undated reference. 2)Valid edition at date of issue. BS EN 62453-301:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 08:39, Uncontrolled Copy, (c) BSI 2 62453-301 IEC:2009(E) CONTENTS INTRODUCTION.7 1 Scope.8 2 No

24、rmative references .8 3 Terms, definitions, symbols, abbreviated terms and conventions 9 3.1 Terms and definitions 9 3.2 Abbreviated terms .9 3.3 Conventions 9 3.3.1 Data type names and references to data types 9 3.3.2 Vocabulary for requirements9 3.3.3 Use of UML .10 4 Fundamentals.10 4.1 System an

25、d FDT topology .10 4.2 FDT topology for H1 devices .10 4.3 FDT topology for HSE devices.11 4.4 Nested communication 13 5 Bus category 14 6 Access to instance and device data14 6.1 DTM 14 6.2 BTM 14 7 Protocol specific behavior.15 7.1 Connection management.15 7.1.1 FMS connection.15 7.1.2 FDT connect

26、ion .16 7.2 Abort .16 7.2.1 OnAbort Indication.16 7.2.2 Abort request.17 7.3 Relation of FMS requests and FMS responses 17 7.4 Subscription mechanism18 7.4.1 General .18 7.4.2 Transactions for subscribing H1 18 7.4.3 Transactions for subscribing HSE19 7.4.4 Transactions for subscribing BTM20 8 Proto

27、col specific usage of general data types.20 8.1 Address.20 8.2 protocolID .20 8.3 applicationDomain.20 8.4 semanticId.21 8.4.1 Block specific definitions .21 8.4.2 Fieldbus management definitions 21 8.4.3 Fieldbus specific definitions.21 9 Protocol specific data types22 9.1 DTM 22 9.1.1 Topology sca

28、n definitions 22 9.1.2 Parameter access22 BS EN 62453-301:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 08:39, Uncontrolled Copy, (c) BSI62453-301 IEC:2009(E) 3 9.1.3 FF device data types .28 9.2 BTM 29 9.2.1 General .29 9.2.2 Parameter access - FF specific definitions.29 10

29、Network management data types43 10.1 General .43 10.2 H1 network management definitions 43 10.3 HSE network management data types .43 11 Communication data types .85 11.1 Common data types 85 11.2 FF FMS data types90 11.3 H1 communication data types96 11.4 HSE communication data types .103 11.5 FDT

30、FF standard block communication data types.110 12 Channel parameter data types112 13 Device identification .114 13.1 Protocol specific handling of data type STRING 114 13.2 Common device type identification data types .115 13.3 Scan identification data types121 13.4 Device type identification data t

31、ypes provided by DTM .121 Annex A (informative) Implementation hints .123 Annex B (normative) Levels of support.125 Bibliography128 Figure 1 Part 301 of the IEC 62453 series .7 Figure 2 Object relations for H1 Device DTM .10 Figure 3 Object relations for HSE application with DTMs and BTMs.12 Figure

32、4 FMS mapping in the FDT connection15 Figure 5 FDT Disconnect service .16 Table 1 Object relations for H1 Device DTM 11 Table 2 Object relations for HSE application wtith DTMs and BTMs .13 Table 3 FF specific protocol identifiers.14 Table 4 Relation of FMS requests and FMS responses 17 Table 5 Actio

33、n object definitions (refer to FF-890):.23 Table 6 Link object definitions23 Table 7 Alert object definitions.24 Table 8 Trend object definitions .26 Table 9 View definition.27 Table 10 Domain object definitions 27 Table 11 Program invocation object definitions 28 Table 12 Structured FF device data

34、types 29 Table 13 Parameter mnemonic 30 Table 14 Mnemonic of structured data types 38 Table 15 Simple common data types42 BS EN 62453-301:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 08:39, Uncontrolled Copy, (c) BSI 4 62453-301 IEC:2009(E) Table 16 H1 Fieldbus Management da

35、ta types.43 Table 17 Simple HSE Fieldbus Management Definitions 43 Table 18 Structured HSE Network management data types49 Table 19 Simple common data types85 Table 20 Structured common data types 87 Table 21 Simple FF FMS data types 90 Table 22 Structured FF FMS data types.91 Table 23 Simple H1 com

36、munication data types 97 Table 24 Structured H1 communication data types.98 Table 25 Simple HSE communication data types .103 Table 26 Structured HSE communication data types 104 Table 27 Block communication data types111 Table 28 Simple FF channel data types .112 Table 29 Structured FF channel data

37、 types113 Table 30 FieldbusFoundation H1 table.115 Table 31 FieldbusFoundation HSE.117 Table 32 FieldbusFoundation blocks 119 Table 33 Simple Fieldbus Scan definitions.121 Table 34 Device identification data types .122 Table B.1 Levels of support .126 BS EN 62453-301:2009Licensed Copy: Wang Bin, ISO

38、/EXCHANGE CHINA STANDARDS, 14/04/2010 08:39, Uncontrolled Copy, (c) BSI62453-301 IEC:2009(E) 7 INTRODUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within a client/server architecture. The specific

39、ation is a result of an analysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly. With the integration of fieldbusses into control systems, there are a few other tasks which need to be per

40、formed. In addition to fieldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous def

41、inition of engineering interfaces that are easy to use for all those involved is of great importance. A device-specific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfa

42、ces defined in this specification. The approach to integration is in general open for all kinds of fieldbusses and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Figure 1 shows how IEC 62453-301 is aligned in the structure of the IEC 62453

43、series. Part 301Communicationprofile integration IEC 61784 CPF 1Figure 1 Part 301 of the IEC 62453 series IEC 1120/09 BS EN 62453-301:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 08:39, Uncontrolled Copy, (c) BSI 8 62453-301 IEC:2009(E) FIELD DEVICE TOOL (FDT) INTERFACE SPEC

44、IFICATION Part 301: Communication profile integration IEC 61784 CPF 1 1 Scope Communication Profile Family 1 (commonly known as FOUNDATIONFieldbus1) defines communication profiles based on IEC 61158-2, Type 1, IEC 61158-3-1, IEC 61158-4-1, IEC 61158-5-5, IEC 61158-5-9, IEC 61158-6-5, and IEC 61158-6

45、-9. The basic profiles CP 1/1 (FF H1) and CP 1/2 (FF HSE) are defined in IEC 61784-1. This part of IEC 62453 provides information for integrating the FOUNDATION Fieldbus (FF) protocol into the FDT standard (IEC 62453-2). The standard describes communication definitions, protocol specific extensions

46、and the means for block (e.g. transducer, resource or function blocks) representation. The new protocol specific definitions are based on FF-specifications for H1 and HSE protocols. Furthermore, the definitions contain information that is needed by systems to configure FF devices. The scope is limit

47、ed to FOUNDATION Fieldbus device and system specific definitions. 2 Normative references The following referenced documents are indispensable for the application of this specification. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

48、document (including any amendments) applies IEC 61158-2, Industrial communication networks Fieldbus specifications Part 2: Physical layer specification and service definition IEC 61158-3-1, Industrial communication networks Fieldbus specifications Part 3-1: Data-link layer service definition Type 1

49、elements IEC 61158-4-1:2007, Industrial communication networks Fieldbus specifications Part 4-1 Data-link layer protocol specification Type 1 elements IEC 61158-5-5, Industrial communication networks Fieldbus specifications Part 5-5: Application layer service definition Type 5 elements IEC 61158-5-9, Industrial communication networks Fieldbus specifications Part 5-9: Application layer se