BS EN 62453-303-2-2009 Field device tool (FDT) interface specification - Communication profile integration - IEC 61784 CP 3 4 CP 3 5 and CP 3 6《现场设备工具(FDT)界面规范 通讯子协议综合 IEC 61784 CP.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interface specification Part 303-2: Communication profile integration IEC 61784 CP 3/4, CP 3/5 and CP 3/6BS EN 62453-303-2:2009Licensed Copy: Wang Bin, IS

2、O/EXCHANGE CHINA STANDARDS, 14/04/2010 09:07, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 62453-303-2:2009. It isidentical to IEC 62453-303-2:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communi

3、cations: process measurement and control, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI

4、 2010ISBN 978 0 580 62563 3ICS 25.040.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. N

5、o. Date Text affectedBRITISH STANDARDBS EN 62453-303-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 09:07, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 62453-303-2 NORME EUROPENNE EUROPISCHE NORM October 2009 CENELEC European Committee for Electrotechnical Standardization

6、Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62453-303-2:2009 E ICS

7、25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 (IEC 62453-303-2:2009) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-2: Intgration

8、 des profils de communication - CEI 61784 CP 3/4, CP 3/5 et CP 3/6 (CEI 62453-303-2:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 303-2: Integration von Kommunikationsprofilen - Kommunikationsprofile (CP) 3/4, 3/5 und 3/6 nach IEC 61784 (IEC 62453-303-2:2009) This European Standar

9、d was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

10、 such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its o

11、wn language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Ita

12、ly, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62453-303-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 09:07, Uncontrolled Copy, (c) BSIEN 62453-303-2

13、:2009 - 2 - Foreword The text of document 65E/128/FDIS, future edition 1 of IEC 62453-303-2, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CEN

14、ELEC as EN 62453-303-2 on 2009-08-01. Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (do

15、p) 2010-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62453-303-2:2009 was approved by CENELEC as a European Standard without any modi

16、fication. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61158 NOTE Harmonized in EN 61158 series (not modified). _ BS EN 62453-303-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 09:07, Uncontrolled Copy, (c) BSI

17、- 3 - EN 62453-303-2:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undate

18、d references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61158-5-10 1)Industrial communicatio

19、n networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements EN 61158-5-10 20082)IEC 61158-6-10 1)Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements EN 61158-6-10 20082)IEC

20、61784-2 1)Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 EN 61784-2 20082)IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device

21、 tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 1)Undated reference. 2)Valid edition at date of issue. BS EN 62453-303-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 09:07, Uncontrolled Copy, (c) BSI 2 62453-303-2 IEC:2009(E) C

22、ONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Terms, definitions, symbols, abbreviated terms and conventions 7 3.1 Terms and definitions 7 3.2 Abbreviated terms .8 3.3 Conventions 8 3.3.1 Data type names and references to data types 8 3.3.2 Vocabulary for requirements8 3.3.3 Use of UM

23、L .8 4 Bus category 8 5 Access instance and device data9 5.1 Process Channel objects provided by DTM9 5.2 DTM services to access instance and device data .9 6 Protocol specific behavior.9 7 Protocol specific usage of general data types.9 8 Protocol specific common data types11 9 Network management d

24、ata types11 9.1 General .11 9.2 Parameter access data types 11 10 Communication data types .17 11 Channel parameter data types20 12 Device identification .23 12.1 Protocol specific handling of data type STRING 23 12.2 Device type identification data types .23 12.3 Topology scan data types26 12.4 Sca

25、n identification data types27 12.5 Device type identification data types .29 Bibliography32 Figure 1 Part 303-2 of the IEC 62453 series 6 Table 1 Protocol identifier 8 Table 2 Physical layer identifier .8 Table 3 Protocol specific usage of general data types9 Table 4 Simple parameter access data typ

26、es .11 Table 5 Structured parameter access data types14 Table 6 Simple communication data types .17 Table 7 Structured communication data types18 Table 8 Simple channel parameter data types21 Table 9 Structured channel parameter data types 22 Table 10 Identification data types for PROFINET with pure

27、 DCP24 BS EN 62453-303-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 09:07, Uncontrolled Copy, (c) BSI62453-303-2 IEC:2009(E) 3 Table 11 Identification data types for PROFINET with I NetworkManagementInfoWrite service. 9.2 Parameter access data types The data types describe

28、 the parameter information of an IEC 61784 CP 3/4, CP 3/5 and CP 3/6 device (see Table 4 and Table 5) Table 4 Simple parameter access data types Data type Definition Description arType UINT ARType according to the PROFINET specification Shall only be set by Parent arProperties UDINT ARProperties acc

29、ording to the PROFINET specification Shall only be set by Parent arUUID UUID ARUUID according to the PROFINET specification Shall only be set by Parent alarmCRType UINT AlarmCRType according to the PROFINET specification Shall only be set by Parent alarmCRProperties UDINT AlarmCRProperties according

30、 to the PROFINET specification Shall only be set by Parent rtaTimeoutFactor UINT RTATimeoutFactor according to the PROFINET specification Shall only be set by Parent rtaRetries UINT RTARetries according to the PROFINET specification Shall only be set by Parent localAlarmReference UINT LocalAlarmRefe

31、rence according to the PROFINET specification Shall only be set by Parent maxAlarmDataLength UINT MaxAlarmDataLength according to the PROFINET specification Shall only be set by Parent infoText STRING Additional textual information Shall only be set by DTM localIndex UINT The attribute used within D

32、evice/Identification to address the device instance. Shall only be set by DTM BS EN 62453-303-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 09:07, Uncontrolled Copy, (c) BSI 12 62453-303-2 IEC:2009(E) Data type Definition Description nameOfStation STRING The station name is

33、 the primary address. The default value is the DNS_CompatibleName of the GSDML. The Parent shall configure the station name according to the rules defined by the DNS_CompatibleName. Shall only be set by Parent apart of the default value, which shall be set by DTM (during InitNew) dynIpAddress BOOL T

34、he attribute indicates whether the IP address is dynamically assigned to the device. Shall only be set by Parent extAddrSupported BOOL Extended address assignment (e.g. by DHCP, BootP) is supported by the Profinet IO Device. Shall only be set by DTM ipAddress STRING The attribute contains the IP add

35、ress that is assigned to the device. The IP address is a secondary address. The default value is “0.0.0.0”. Shall only be set by Parent ipSubnetMask STRING The attribute contains the subnet mask. The default value is “255.255.255.255”. Shall only be set by Parent ipDefaultGateway STRING The attribut

36、e contains the default gateway address. The default value is an empty string. Shall only be set by Parent macAddress STRING The attribute contains the MAC address of the device. The MAC address is a secondary address. The macAddress attribute is of type string and shall be used with format shown in

37、the example: Example: 00:A0:45:01:02:03 Shall only be set by Parent slotNumber UINT The slot address that is used by the module Shall be set by DTM during configuration. Can be set by Parent during topology scan moduleIdentNumber UDINT The ModuleIdentNumber according to the PROFINET specification Sh

38、all be set by DTM during configuration. Can be set by Parent during topology scan moduleProperties UINT This attribute is reserved for future use according to the PROFINET specification subSlotNumber UINT The subslot address that is used by the submodule. Shall be set by DTM during configuration. Ca

39、n be set by Parent during topology scan subModuleIdentNumber UDINT The SubmoduleIdentNumber according to the PROFINET specification. Shall be set by DTM during configuration. Can be set by Parent during topology scan ioType enumeration (Input | Output | InputAndOutput ) Allowed values are: Input, Ou

40、tput, InputAndOutput. Values and meaning according to the PROFINET specification - SubmoduleProperties.Type. Shall be set by DTM during configuration. Can be set by Parent during topology scan sharedInput enumeration (IOController | IOControllerShare ) Allowed values are: IOController, IOControllerS

41、hare. Values and meaning according to the PROFINET specification - SubmoduleProperties.SharedInput. Shall be set by DTM during configuration. Can be set by Parent during topology scan BS EN 62453-303-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 09:07, Uncontrolled Copy, (c

42、) BSI62453-303-2 IEC:2009(E) 13 Data type Definition Description reduceInputSubmodule DataLength enumeration (Expected | Zero ) Allowed values are: Expected, Zero. Values and meaning according to the PROFINET specification - SubmoduleProperties.ReduceInputSubmoduleDataLength. Shall be set by DTM dur

43、ing configuration. Can be set by Parent during topology scan reduceOutputSubmodule DataLength enumeration (Expected | Zero ) Allowed values are: Expected, Zero. Values and meaning according PROFINET specification - SubmoduleProperties.ReduceOutputSubmoduleDataLength. Shall be set by DTM during confi

44、guration. Can be set by Parent during topology scan discardIOXS enumeration (Expected | Zero ) Allowed values are: Expected, Zero. Values and meaning according PROFINET specification -SubmoduleProperties.DiscardIOXS. Shall be set by DTM during configuration. Can be set by Parent during topology scan

45、 api UDINT The API according to the PROFINET specification. Shall be set by DTM during configuration. Can be set by Parent during topology scan index UINT The address of the desired record data object. Shall only be set by DTM recordData ARRAY OF USINT The binary data that will be written to the sub

46、module during startup or connect. The record data implicitly contain the record data length. Shall only be set by DTM consistency enumeration (itemConsistency | allItemsConsistency ) The consistency of the input data. Shall only be set by DTM during configuration sendClockFactor UINT SendClockFactor

47、 according to the PROFINET specification. Shall only be set by Parent, if the attribute belongs to the element SubModule. Shall only be set by DTM, if the attribute belongs to the element SendClockFactor reductionRatio UINT ReductionRatio according to the PROFINET specification. Shall only be set by

48、 Parent, if the attribute belongs to the element SubModule. Shall only be set by DTM, if the attribute belongs to the element ReductionRatio watchdogFactor UINT WatchdogFactor according to the PROFINET specification. Shall only be set by Parent dataHoldFactor UINT DataHoldFactor according to the PRO

49、FINET specification. Shall only be set by Parent BS EN 62453-303-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 09:07, Uncontrolled Copy, (c) BSI 14 62453-303-2 IEC:2009(E) Table 5 Structured parameter access data types Definition Data type Elementary data types UsageMultiplicity Description STRUCT Record data that will be written to the submodule during startup or connect index M 11 recordData M 11 RecordParamData fdt:name O 01 STRUCT List of re