1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 62561-5:2011Incorporating corrigendum April 2012Lightning protection system components (LPSC) Part 5: Requirements for earth electrode inspection housings and earth electro
2、de sealsBS EN 62561-5:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 62561-5:2011. It is derived from IEC 62561-5:2011. It supersedes BS EN 50164-5:2009 which will be withdrawn on 28 July 2014.The UK participation in its preparation was entrusted to Techni
3、cal Committee GEL/81, Protection against lightning.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.ISBN 978 0 5
4、80 78972 4 ICS 29.020; 91.120.40 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 October 2011.Amendments/corrigenda issued since publicationDate Text affected
5、The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags .30 April 2012 Removal of French pages The British Standards Institution 2012. Published by BSI StandardsLimited 2012.EUROPE
6、AN STANDARD EN 62561-5 NORME EUROPENNE EUROPISCHE NORM August 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - Al
7、l rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62561-5:2011 E ICS 29.020; 91.120.40 Supersedes EN 50164-5:2009English version Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and ea
8、rth electrode seals (IEC 62561-5:2011, modified) Composants de systme de protection contre la foudre (CSPF) - Partie 5: Exigences pour les regards de visite et les joints dtanchit des lectrodes de terre (CEI 62561-5:2011, modifie) Blitzschutzsystembauteile (LPSC) - Teil 5: Anforderungen an Revisions
9、ksten und Erderdurchfhrungen (IEC 62561-5:2011, modifiziert) This European Standard was approved by CENELEC on 2011-07-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard
10、without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other la
11、nguage made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech R
12、epublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. - 2 - Foreword The text of document 81/391/F
13、DIS, future edition 1 of IEC 62561-5, prepared by IEC TC 81, Lightning protection, was submitted to the IEC-CENELEC parallel vote. A draft amendment, prepared by the Technical Committee CENELEC TC 81X, Lightning protection, was submitted to the formal vote. The combined texts were approved by CENELE
14、C as EN 62561-5:2011 on 2011-07-28. This European Standard supersedes EN 50164-5:2009. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-07-28 latest date by which the nati
15、onal standards conflicting with the EN have to be withdrawn (dow) 2014-07-28 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62561-5:2011 was approved by CENELEC as a European Standard with agreed common modifications. 62561-5 IEC:2011BS EN 62561-5
16、:2011- 3 -Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, th
17、e latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62305 Series Protection against lightning EN 62305 S
18、eries IEC 62305-3 - Protection against lightning - Part 3: Physical damage to structures and life hazard EN 62305-3 - 62561-5 IEC:2011BS EN 62561-5:2011 2 62561-5 IEC:2011 CONTENTS FOREWORD 3 INTRODUCTION . 5 1 Scope . . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Requirements . 6 4.1
19、 General . 6 4.2 Documentation . . 7 4.3 Earth electrode inspection housing . 7 4.4 Earth electrode seal . 7 4.5 Marking . 7 5 Tests . 7 5.1 General test conditions . 7 5.2 Earth electrode inspection housing . 8 5.2.1 General . 8 5.2.2 Load test . 8 5.3 Earth electrode seal test . 9 5.4 Marking . .
20、10 6 Electromagnetic compatibility (EMC) . 10 7 Structure and content of the test report . 11 7.1 General . . 11 7.2 Report identification . 11 7.3 Specimen description . 11 7.4 Standards and references . 12 7.5 Test procedure 12 7.6 Testing equipment, description . 12 7.7 Results and parameters rec
21、orded . 12 Bibliography . 13 Figure 1 Test arrangement for load test . . 8 Figure 2 Test arrangement for sealing test . 10 BS EN 62561-5:201162561-5 IEC:2011 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) Part 5: Requirements for earth electrode inspectio
22、n housings and earth electrode seals FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questi
23、ons concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s
24、)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collab
25、orates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on
26、 the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure
27、that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to th
28、e maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification b
29、odies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach
30、to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) a
31、nd expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication.
32、9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62561-5 has been prepared by IEC technical committee 81: Lightni
33、ng protection. The text of this standard is based on the following documents: FDIS Report on voting 81/391/FDIS 81/399/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordan
34、ce with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 62561 series, published under the general title Lightning protection system components (LPSC), can be found on the IEC website. BS EN 62561-5:2011 4 62561-5 IEC:2011 The committee has decided that the contents of this publica
35、tion will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 62561-5:201162561-5 IEC:2011
36、 5 INTRODUCTION This Part 5 of EN 62561 deals with the requirements and tests for lightning protection system components (LPSC) used for the installation of a lightning protection system (LPS) designed and implemented according to EN 62305 series of standards. BS EN 62561-5:2011 6 62561-5 IEC:2011 L
37、IGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) Part 5: Requirements for earth electrode inspection housings and earth electrode seals 1 Scope This Part 5 of EN 62561 specifies the requirements and tests for earth electrode inspection housings (earth pit), earth electrode seals. Lightning protection sy
38、stem components (LPSC) may also be suitable for use in hazardous atmospheres. Regard should then be taken of the extra requirements necessary for the components to be installed in such conditions. NOTE Different requirements and test procedures are given in EN 124 and EN-1253-1. 2 Normative referenc
39、es The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 62305 series, Protection against lightning
40、(IEC 62305 series)EN 62305-3, Protection against lightning Part 3: Physical damage to structures and life hazard (IEC 62305-3 series)3 Terms and definitions For the purposes of this document, the following terms and definitions apply 3.1 earth electrode inspection housing metallic or non-metallic en
41、closure that houses the down conductor/earth termination connection for inspection and testing purposes and consists of a housing and a removable lid 3.2 earth electrode seal water pressure seal used in conjunction with an earth rod electrode that passes through the foundation of the building, so pr
42、eventing ground water from entering the building 4 Requirements 4.1 General All earth electrode inspection housings and earth electrode seals shall be so designed and constructed that in normal use their performance is reliable and without danger to persons and the surrounding. BS EN 62561-5:2011625
43、61-5 IEC:2011 7 The choice of a material depends on its ability to match the particular application requirements. 4.2 Documentation The manufacturer or supplier of the earth electrode inspection housing and earth electrode seals shall provide adequate information in his literature to ensure that the
44、 installer can select and install the materials in a suitable and safe manner, in accordance with EN 62305-3 . Compliance is checked by inspection. 4.3 Earth electrode inspection housing The design of the earth electrode inspection housing shall be such that it carries out its function of enclosing
45、the down conductor/earth rod termination in an acceptable and safe manner, and has sufficient internal dimensions to permit the assembly/disassembly of the earth rod clamp. The housing body shall be deep enough to permit the lid to sit flush on the body without fouling on the rod/conductor/clamp ass
46、embly. The material of the earth electrode inspection housing shall be compatible with its surrounding environment and shall comply with the tests given in 5.2. 4.4 Earth electrode seal The design of the earth electrode seal shall be such that it carries out its function of preventing ground water b
47、ypassing the earth rod and entering the basement of a building, in an acceptable and safe manner. The material of the earth electrode seal shall be compatible with its surrounding environment and comply with the tests given in 5.3. 4.5 Marking All products complying with this standard shall be marke
48、d at least with the following: a) manufacturers or responsible vendors name or trade mark; b) identifying symbol. Where this proves to be impractical the marking in accordance with b) may be given on the smallest packing unit. NOTE Marking may be applied for example by moulding, pressing, engraving,
49、 printing adhesive labels or water slide transfers. Compliance is checked in accordance with 5.4. 5 Tests 5.1 General test conditions The tests in accordance with this standard are type tests. Unless otherwise specified, tests are carried out with the specimens prepared as in normal use according to the manufacturers or supplier instructions. All tests are carried out on new specimens. BS EN 62561-5:2011 8 62561-5 IEC:2011 Unless otherwise specifie
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1