1、Fibre optic active components and devices Reliability standardsPart 3: Laser modules used for telecommunicationBS EN 62572-3:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62572-3:2016. It isi
2、dentical to IEC 62572-3:2016. It supersedes BS EN 62572-3:2014 which iswithdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems and active devices.A list of organizations represented on this committee ca
3、n be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 90137 9ICS 31.260; 33.180.0
4、1Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62572-3:2016EUR
5、OPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62572-3 June 2016 ICS 31.260; 33.180 Supersedes EN 62572-3:2014 English Version Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication (IEC 62572-3:2016) Composants et dispositifs actifs e
6、n fibres optiques - Normes de fiabilit - Partie 3: Modules laser utiliss pour les tlcommunications (IEC 62572-3:2016) Aktive Lichtwellenleiterbauelemente und -gerte - Zuverlssigkeitsnormen - Teil 3: Lasermodule fr Telekommunikationsanwendungen (IEC 62572-3:2016) This European Standard was approved b
7、y CENELEC on 2016-03-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national s
8、tandards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lan
9、guage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fra
10、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de No
11、rmalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62572-3:2016 E BS EN 62572-3:2016EN
12、62572-3:2016 2 European foreword The text of document 86C/1302/CDV, future edition 3 of IEC 62572-3, prepared by SC 86C “Fibre optic systems and active devices“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62572-3:2016. The following dates
13、are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-12-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-03-24 This standard super
14、sedes EN 62572-3:2014. It constitutes a technical revision in which errors in Table 1 and Table 2 have been corrected. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifyin
15、g any or all such patent rights. Endorsement notice The text of the International Standard IEC 62572-3:2016 was approved by CENELEC as a European Standard without any modification. BS EN 62572-3:2016EN 62572-3:2016 3 Annex ZA (normative) Normative references to international publications with their
16、corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ
17、ing any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publ
18、ication Year Title EN/HD Year IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-1 - IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 - IEC 60749-6 - Semiconductor devices - Mechanical and climatic test methods - P
19、art 6: Storage at high temperature EN 60749-6 - IEC 60749-8 - Semiconductor devices Mechanical and climatic test methods Part 8: Sealing EN 60749-8 - IEC 60749-10 - Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock EN 60749-10 - IEC 60749-11 - Semiconductor dev
20、ices - Mechanical and climatic test methods - Part 11: Rapid change of temperature - Two-fluid-bath method EN 60749-11 - IEC 60749-12 - Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency EN 60749-12 - IEC 60749-25 - Semiconductor devices - Mechanica
21、l and climatic test methods - Part 25: Temperature cycling EN 60749-25 - IEC 60749-26 - Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) EN 60749-26 - IEC/TR 62572-2 - Fibre optic active components and
22、devices - Reliability standards - Part 2: Laser module degradation - - MIL-STD-883 - Test method standard Microcircuits - - BS EN 62572-3:2016 2 IEC 62572-3:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Terms, definitions, symbols and abbreviations 7 3.1
23、Terms and definitions 7 3.2 Symbols and abbreviations 8 4 Laser reliability and quality assurance procedure . 8 4.1 Demonstration of product quality . 8 4.2 Testing responsibilities 9 4.2.1 General . 9 4.2.2 Recommendation applicable to laser customer/system supplier . 9 4.2.3 Recommendation applica
24、ble to system operator . 9 4.3 Quality improvement programmes (QIPs) . 9 5 Tests . 9 5.1 General . 9 5.2 Structural similarity . 10 5.3 Burn-in and screening (when applicable in the specification) 10 6 Activities . 14 6.1 Analysis of reliability results 14 6.2 Technical visits to LMMs . 14 6.3 Desig
25、n/process changes . 15 6.4 Deliveries 15 6.5 Supplier documentation . 15 Annex A (informative) Guidance on testing in Table 1 and Table 2 16 A.1 Laser module life tests containing thermoelectric coolers (Table 1, test 1.1) . 16 A.2 Laser module life tests for uncooled modules (Table 1, test 1.2) . 1
26、6 A.3 Laser diode life tests on submounts (Table 1, test 1.3) . 17 A.4 Monitor photodiode life tests (Table 1, test 1.4) 17 A.5 Temperature cycling and thermal shock (Table 1, test 3 and Table 2, test 2) 18 A.6 Sealing/hermeticity (Table 1, test 4 and Table 2, test 3) . 18 A.7 Shock and vibration (T
27、able 1 , test 5 and Table 2, test 4) . 18 A.8 High-temperature storage (Table 1, test 6 and Table 2, test 5) . 18 A.9 Electrostatic discharge sensitivity (ESD) (Table 1, test 7and Table 2, test 6) 19 A.10 Residual gas analysis (RGA) (Table 1, test 8 and, Table 2, test 7) . 19 Bibliography . 20 Table
28、 1 Initial qualification (1 of 3) 10 Table 2 Maintenance of qualification (1 of 2) . 13 Table 3 Performance for laser module reliability parameters . 14 Table A.1 Recommended life test conditions for laser modules containing Peltier coolers . 16 Table A.2 Recommended life test conditions for uncoole
29、d laser modules 17 Table A.3 Recommended laser diode life test conditions . 17 Table A.4 Recommended photodiode life test conditions . 18 BS EN 62572-3:2016IEC 62572-3:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES RELIABILITY STANDARDS Part 3:
30、Laser modules used for telecommunication FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all qu
31、estions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publicati
32、on(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC co
33、llaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinio
34、n on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ens
35、ure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently t
36、o the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certificati
37、on bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall att
38、ach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fee
39、s) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publicati
40、on. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62572-3 has been prepared by subcommittee 86C: Fibre optic s
41、ystems and active devices of IEC technical committee 86: Fibre optics. This third edition cancels and replaces the second edition published in 2014. This third edition constitutes a technical revision in which errors in Table 1 and Table 2 have been corrected. The text of this standard is based on t
42、he following documents: CDV Report on voting 86C/1302/CDV 86C/1345/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. BS EN 62572-3:2016 4 IEC 62572-3:2016 IEC 2016 This publication has been drafted in accordance wi
43、th the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62572 series, published under the general title Fibre optic active components and devices Reliability standards, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged un
44、til the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later
45、 date. BS EN 62572-3:2016IEC 62572-3:2016 IEC 2016 5 INTRODUCTION The laser modules covered by this International Standard are purchased by system suppliers (SS) to be inserted in equipment, which in turn are supplied/sold to a system operator (SO) or a network operator (see definitions in Clause 3)
46、. For the system operator to act as an informed buyer, he/she should have knowledge of the potential risks posed by the use of critical components. Optoelectronic component technology is continuing to develop. Consequently, during product development phases, many failure mechanisms in laser modules
47、have been identified. These failure mechanisms, if undetected, could result in very short laser lifetime in system use. BS EN 62572-3:2016 6 IEC 62572-3:2016 IEC 2016 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES RELIABILITY STANDARDS Part 3: Laser modules used for telecommunication 1 Scope This part of
48、 IEC 62572 deals with reliability assessment of laser modules used for telecommunication. The aim of this standard is to establish a standard method of assessing the reliability of laser modules in order to minimize risks and to promote product development and reliability; to establish means by whic
49、h the distribution of failures with time can be determined. This should enable the determination of equipment failure rates for specified end of life criteria. In addition, guidance is given in IEC TR 62572-2. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the l
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1