BS EN 62676-1-1-2014 Video surveillance systems for use in security applications System requirements General《应用于安保中的视频监控系统 系统要求 概述》.pdf

1、BSI Standards PublicationVideo surveillance systems for use in security applicationsPart 1-1: System requirements GeneralBS EN 62676-1-1:2014Incorporating corrigendum July 2014BS EN 62676-1-1:2014National forewordThis British Standard is the UK implementation of EN 62676-1-1:2014, incorporating corr

2、igendum July 2014. It is identical to IEC 62676-1-1:2013. It supersedes BS EN 50132-1:2010, which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee GW/1, Electronic security systems, to Subcommittee GW/1/10, Closed circuit television (CCTV).A list of organizat

3、ions represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 201

4、4ISBN 978 0 580 87833 6ICS 13.320Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2014.Amendments/corrigenda issued since publicationDate Text affected30 Se

5、ptember 2014 Implementation of CENELEC corrigendum July 2014: Supersession information inserted in EN title page and EN Foreword.Supersession information inserted in National ForewordBRITISH STANDARDEUROPEAN STANDARD EN 62676-1-1 NORME EUROPENNE EUROPISCHE NORM March 2014 CENELEC European Committee

6、for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENEL

7、EC members. Ref. No. EN 62676-1-1:2014 E ICS 13.320 English version Video surveillance systems for use in security applications - Part 1-1: System requirements - General (IEC 62676-1-1:2013) Systmes de vidosurveillance destins tre utiliss dans les applications de scurit - Part 1-1: Exigences systmes

8、 - Gnralits (CEI 62676-1-1:2013) Videoberwachungsanlagen fr Sicherheitsanwendungen - Teil 1-1: Systemanforderungen (IEC 62676-1-1:2013) This European Standard was approved by CENELEC on 2013-12-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond

9、itions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard e

10、xists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the n

11、ational electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,

12、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Supersedes EN 50132-1:2010Incorporating corrigendum July 2014EN 62676-1-1:2014 - 2 - Foreword The text of document 79/432/FDIS, future edition 1 of IEC 62676-1-1, prepared by IEC TC 79 “Alarm and electr

13、onic security systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62676-1-1:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-0

14、9-02 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-12-02 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying

15、any or all such patent rights. Endorsement notice The text of the International Standard IEC 62676-1-1:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62676-

16、2 Series NOTE Harmonised as EN 62676-2 Series. ISO/IEC 13818-1 NOTE Harmonised as EN ISO/IEC 13818-1. BS EN 62676-1-1:2014This document supersedes EN 50132-1:2010- 3 - EN 62676-1-1:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publicat

17、ions The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NO

18、TE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60065 - Audio, video and similar electronic apparatus - Safety requirements EN 60065 - IEC 60068-2-75 - Environmental testing - Part 2

19、-75: Tests - Test Eh: Hammer tests EN 60068-2-75 - IEC 60529 - Degrees of protection provided by enclosures (IP Code) EN 60529 - IEC 60950-1 - Information technology equipment - Safety - Part 1: General requirements EN 60950-1 - IEC 61000-6-1 2005 Electromagnetic compatibility (EMC) - Part 6-1: Gene

20、ric standards - Immunity for residential, commercial and light-industrial environments EN 61000-6-1 2007 IEC 61000-6-2 2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments EN 61000-6-2 + corr. September 2005 2005 IEC 61000-6-3 - Electromagneti

21、c compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000-6-3 - IEC 61000-6-4 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments EN 61000-6-4 - IEC 62

22、262 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) EN 62262 - IEC 62599-1 2010 Alarm systems - Part 1: Environmental test methods - - IEC 62599-2 2010 Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements

23、for components of fire and security alarm systems - - IEC 62676-4 Video surveillance systems for use in security applications - Part 4: Application guidelines - - ISO 12233 2000 Photography - Electronic still-picture cameras - Resolution measurements - - BS EN 62676-1-1:2014 2 62676-1-1 IEC:2013 CON

24、TENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviations 8 3.1 Terms and definitions 8 3.2 Abbreviations 22 4 Functional description of the VSS . 23 4.1 VSS . 23 4.2 Video environment 23 General . 23 4.2.1Image capture . 24 4.2.2Interconnections 24 4.2.3Im

25、age handling 24 4.2.44.3 System management . 25 General . 25 4.3.1Data management . 25 4.3.2Activity management . 26 4.3.3Interfaces to other systems 27 4.3.44.4 System security . 28 General . 28 4.4.1System integrity . 28 4.4.2Data integrity . 28 4.4.35 Security grading . 28 6 Functional requiremen

26、ts . 30 6.1 Video environment 30 Image capture . 30 6.1.1Interconnections 30 6.1.2Image handling 31 6.1.36.2 System management . 36 Operation 36 6.2.1Activity and information management 36 6.2.2Interfacing to other systems . 38 6.2.36.3 System security . 38 General . 38 6.3.1System integrity . 38 6.

27、3.2Image and data integrity 43 6.3.36.4 Environmental requirements 44 VSSs as primary mitigation of the risk . 44 6.4.1VSSs as secondary mitigation of the risk . 44 6.4.26.5 Image quality . 45 7 Environmental classes 46 7.1 General . 46 7.2 Environmental Class I Indoor, but restricted to residential

28、/office environment 46 7.3 Environmental Class II Indoor General 46 BS EN 62676-1-1:201462676-1-1 IEC:2013 3 7.4 Environmental Class III Outdoor, but sheltered from direct rain and sunshine, or indoor with extreme environmental conditions . 46 7.5 Environmental Class IV Outdoor General . 46 8 Docume

29、ntation . 47 8.1 System documentation 47 8.2 Instructions relating to operation . 47 8.3 System component documentation 47 Annex A (normative) Special national conditions 48 Annex B (informative) Video export in homeland security systems . 49 Bibliography 50 Figure 1 VSS . 23 Figure 2 Example for VS

30、S 24 Figure 3 Activity management 27 Figure 4 Risk and security grades 29 Figure 5 Reference to ISO 12233 resolution measurement chart (unit in 100 lines) 45 Table 1 Storage . 31 Table 2 Archiving and backup 33 Table 3 System logs 38 Table 4 Monitoring of interconnections . 39 Table 5 Tamper detecti

31、on 40 Table 6 Level of access . 41 Table 7 Authorisation code requirements . 42 Table 8 Data access 42 Table 9 Access to system logs . 42 Table 10 Access to system set-up 43 Table 11 Data labelling 43 BS EN 62676-1-1:2014 6 62676-1-1 IEC:2013 INTRODUCTION The IEC Technical Committee 79 in charge of

32、alarm and electronic security systems together with many governmental organisations, test houses and equipment manufacturers has defined a common framework for video surveillance transmission in order to achieve interoperability between products. The IEC 62676 series of standards on video surveillan

33、ce system is divided into 4 independent parts: Part 1: System requirements Part 2: Video transmission protocols Part 3: Analog and digital video interfaces Part 4: Application guidelines (to be published) Each part has its own clauses on scope, references, definitions and requirements. This IEC 6267

34、6-1 series consists of 2 subparts, numbered parts 1-1 and 1-2 respectively: IEC 62676-1-1, System requirements General IEC 62676-1-2, System requirements Performance requirements for video transmission The first subpart of this IEC 62676-1 series applies to systems for surveillance of private and pu

35、blic areas. It includes four security grades and four environmental classes. This IEC Standard is intended to assist Video Surveillance System (VSS) companies, manufacturers, system integrators, installers, consultants, owners, users, insurers and law enforcement in achieving a complete and accurate

36、 specification of the surveillance system. This International Standard does not specify the type of technology for a certain observation task. Due to the wide range of VSS applications e.g. security, safety, public safety, transportation, etc. only the minimum requirements are covered in this standa

37、rd. For specific applications e.g. in homeland security, additional requirements need to be applied, which are defined in the annex of this standard. This IEC Standard is not intended to be used for testing individual VSS components. Today VSSs reside in security networks using IT infrastructure, eq

38、uipment and connections within the protected site itself. BS EN 62676-1-1:201462676-1-1 IEC:2013 7 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS Part 1-1: System requirements General 1 Scope This part of IEC 62676 specifies the minimum requirements and gives recommendations for Video S

39、urveillance Systems (VSS), so far called CCTV, installed for security applications. This Standard specifies the minimum performance requirements and functional requirements to be agreed on between customer, law-enforcement where applicable and supplier in the operational requirement, but does not in

40、clude requirements for design, planning, installation, testing, operation or maintenance. This standard excludes installation of remotely monitored detector activated VSSs. This IEC Standard also applies to VSS sharing means of detection, triggering, interconnection, control, communication and power

41、 supplies with other applications. The operation of a VSS is not be adversely influenced by other applications. Requirements are specified for VSS components where the relevant environment is classified. This classification describes the environment in which the VSS component may be expected to oper

42、ate as designed. When the requirements of the four environmental classes are inadequate, due to the extreme conditions experienced in certain geographic locations, special national conditions may be applied (see Annex A). 2 Normative references The following documents, in whole or in part, are norma

43、tively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60065, Audio, video and similar electronic apparatus Safet

44、y requirements IEC 60068-2-75, Environmental testing Part 2-75: Tests Test Eh: Hammer tests IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60950-1, Information technology equipment Safety Part 1: General requirements IEC 61000-6-1:2005, Electromagnetic compatibility (EMC) Part

45、 6-1: Generic standards Immunity for residential, commercial and light-industrial environments IEC 61000-6-2:2005, Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments IEC 61000-6-3, Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emiss

46、ion standard for residential, commercial and light-industrial environments IEC 61000-6-4, Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments BS EN 62676-1-1:2014 8 62676-1-1 IEC:2013 IEC 62262, Degrees of protection provided by enclosures fo

47、r electrical equipment against external mechanical impacts (IK code) IEC 62599-1:2010, Alarm systems Part 1: Environmental test methods IEC 62599-2:2010, Alarm systems Part 2: Electromagnetic compatibility Immunity requirements for components of fire and security alarm systems IEC 62676-4, Video sur

48、veillance systems for use in security applications Part 4: Application guidelines1ISO 12233:2000, Photography Electronic still-picture cameras Resolution measurements 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitio

49、ns apply. 3.1.1access level level of access to particular functions of the VSS, defining the user rights of an operator, to control and configure the system as well as the access to data on the VSS 3.1.2acknowledge action of a user to accept a message or an indication 3.1.3action deliberate operation or act by the user which is part of alarm procedure 3.1.4Advanced Streaming Format proprietary digital audio/digital video container format, especial