BS EN 62680-2-2014 Universal serial bus interfaces for data and power Universal serial bus Micro-USB cables and connectors specification revision 1 01《数据和电源通用串行总线接口 通用串行总线(USB)插孔电缆.pdf

1、BSI Standards PublicationUniversal serial bus interfaces for data and powerPart 2: Universal serial bus Micro-USB cables and connectors specification, revision 1.01BS EN 62680-2:2013National forewordThis British Standard is the UK implementation of EN 62680-2:2013. It isidentical to IEC 62680-2:2013

2、.The UK participation in its preparation was entrusted to Technical Commit-tee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary pr

3、ovisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 79854 2ICS 33.120; 35.200Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was p

4、ublished under the authority of theStandards Policy and Strategy Committee on 28 February 2014.Amendments /corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62680-2:2013EUROPEAN STANDARD EN 62680-2 NORME EUROPENNE EUROPISCHE NORM December 2013 CENELEC European Committee for

5、Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC m

6、embers. Ref. No. EN 62680-2:2013 E ICS 33.120; 35.200 English version Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision 1.01 (IEC 62680-2:2013) Interfaces de bus universel en srie pour les donnes et lalimentati

7、on lectrique - Partie 2: Bus universel en srie - Spcification des cbles et connecteurs micro-USB, rvision 1.01 (CEI 62680-2:2013) Schnittstellen des Universellen Seriellen Busses fr Daten und Energie - Teil 2: Festlegung fr USB-Mikro-USB-Kabel und Steckverbinder (IEC 62680-2:2013) This European Stan

8、dard was approved by CENELEC on 2013-10-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concern

9、ing such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC memb

10、er into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republi

11、c of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62680-2:2013EN 62680-2:2013 - 2 - Foreword The tex

12、t of document 100/2153/FDIS, future edition 1 of IEC 62680-2, prepared by IEC/TC 100, “Audio, video and multimedia systems and equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62680-2:2013. The following dates are fixed: latest date by which the document has to

13、 be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-16 Attention is drawn to the possibility that some of the elements of thi

14、s document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62680-2:2013 was approved by CENELEC as a European Standard without any modification. BS EN 62

15、680-2:2013 4 62680-2 IEC:2013 USB-IF:2006 INTRODUCTION The IEC 62680 series is based on a series of specifications that were originally developed by the USB Implementers Forum (USB-IF). These specifications were submitted to the IEC under the auspices of a special agreement between the IEC and the U

16、SB-IF. The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of companies that developed the Universal Serial Bus specification. The USB-IF was formed to provide a support organization and forum for the advancement and adoption of Universal Serial Bus technology.

17、The Forum facilitates the development of high-quality compatible USB peripherals (devices), and promotes the benefits of USB and the quality of products that have passed compliance testing. ANY USB SPECIFICATIONS ARE PROVIDED TO YOU “AS IS, “WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF M

18、ERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON

19、. THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS. Entering into USB Adopters Agreements may, however, allow a signing company to participate in a reciprocal, royalty-free licensin

20、g arrangement for compliant products. For more information, please see: http:/www.usb.org/developers/docs/ http:/www.usb.org/developers/devclass_docs#approved IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB I

21、MPLEMENTERS FORUM.” This series covers the Universal Series Bus interfaces for data and power and consists of the following parts: IEC 62680-1, Universal Serial Bus interfaces for data and power Part 1: Universal Serial Bus Specification, Revision 2.0 IEC 62680-2, Universal Serial Bus interfaces for

22、 data and power Part 2: USB Micro-USB Cables and Connectors Specification, Revision 1.01 IEC 62680-3, Universal Serial Bus interfaces for data and power Part 3: USB Battery Charging Specification, Revision 1.2 IEC 62680-4, Universal Serial Bus interfaces for data and power Part 4: Universal Serial B

23、us Cables and Connectors Class Document Revision. 2.0 This part of the IEC 62680 series consists of several distinct parts: the main body of the text, which consists of the original specification and all ECN and Errata developed by the USB-IF. BS EN 62680-2:201362680-2 IEC:2013 5 USB-IF:2006 CONTENT

24、S 1 Introduction 10 1.1 General . 10 1.2 Objective of the Specification 10 1.3 Intended Audience/Scope 10 1.4 Related Documents . 10 2 Acronyms and Terms 10 3 Significant Features 11 3.1 USB 2.0 Specification Compliance 11 3.2 On-The-Go Device 11 3.3 Connectors 11 3.4 Compliant Cable Assemblies . 12

25、 3.5 Plug Overmolds . 12 4 Cables and Connectors 12 4.1 Introduction . 12 4.2 Micro-Connector Mating 12 4.3 Color Coding . 13 4.4 Device, Cable and Adapter Delays 13 4.5 Compliant Usage of Connectors and Cables 14 4.5.1 Cables . 14 4.5.2 Overmolds . 14 4.5.3 Mechanical Interfaces 14 4.5.4 Surface mo

26、unt standard version drawings . 14 4.5.5 DIP-type and Midmount-type receptacles . 14 4.5.6 Connector Keying 15 4.5.7 Right Angle Plugs 15 4.5.8 Adapters 15 4.6 Drawings . 15 5 Electrical Compliance Requirements 34 5.1 Data Rates Beyond USB 2.0 (480Mb/s ) . 35 5.2 Low Level Contact Resistance . 35 5.

27、3 Contact Current Rating 35 5.3.1 Signal Contacts Only (2, 3, and 4) . 35 5.3.2 With Power Applied Contacts (1 and 5) 35 6 Mechanical Compliance Requirements . 35 6.1 Operating Temperature Range 35 6.1.1 Option I . 35 Option II 35 6.2 Insertion Force 35 6.3 Extraction Force 35 6.4 Plating . 35 6.4.1

28、 Option I . 36 6.4.2 Option II 36 6.5 Solderability 36 6.6 Peel Strength (Reference Only) . 36 6.7 Wrenching Strength (Reference Only) . 36 6.8 Lead Co-Planarity . 36 6.9 RoHS Compliance . 36 BS EN 62680-2:2013 6 62680-2 IEC:2013 USB-IF:2006 6.10 Shell edited three pictures (Figure 4-10, 4-11 and 4-

29、12). 1.03RC 12/11/2006 Two pictures edited (Figure 4-8 and 4-9). In fig 4-8 max height to be 2.8mm MAX. In fig 4-9 R0.25mm MAX to be R0.30mm MAX. 1.0RC3 12/19/2006 For BoD approval 1.0 1/12/2007 Approved 1.0 1/22/2007 Cosmetic edits for publication 1.01 4/4/2007 Editorial corrections and additions t

30、o contributor list. Reinserted shell and plug material requirements as section 6.10. Clarified wording on Plating Recommendations. Copyright 2006 USB Implementers Forum, Inc. (USB-IF). All rights reserved. BS EN 62680-2:2013 8 62680-2 IEC:2013 USB-IF:2006 A LICENSE IS HEREBY GRANTED TO REPRODUCE THI

31、S SPECIFICATION FOR INTERNAL USE ONLY. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, IS GRANTED OR INTENDED HEREBY. USB-IF AND THE AUTHORS OF THIS SPECIFICATION EXPRESSLY DISCLAIM ALL LIABILITY FOR INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS, RELATING TO IMPLEMENTATION OF INFORMAT

32、ION IN THIS SPECIFICATION. USB-IF AND THE AUTHORS OF THIS SPECIFICATION ALSO DO NOT WARRANT OR REPRESENT THAT SUCH IMPLEMENTATION(S) WILL NOT INFRINGE THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. THIS SPECIFICATION IS PROVIDED “AS IS“ AND WITH NO WARRANTIES, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE

33、. ALL WARRANTIES ARE EXPRESSLY DISCLAIMED. NO WARRANTY OF MERCHANTABILITY, NO WARRANTY OF NON-INFRINGEMENT, NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, AND NO WARRANTY ARISING OUT OF ANY PROPOSAL, SPECIFICATION, OR SAMPLE. IN NO EVENT WILL USB-IF OR USB-IF MEMBERS BE LIABLE TO ANOTHER FOR THE

34、 COST OF PROCURING SUBSTITUTE GOODS OR SERVICES, LOST PROFITS, LOSS OF USE, LOSS OF DATA OR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES, WHETHER UNDER CONTRACT, TORT, WARRANTY, OR OTHERWISE, ARISING IN ANY WAY OUT OF THE USE OF THIS SPECIFICATION, WHETHER OR NOT SUCH PARTY HAD ADVANC

35、E NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. All product names are trademarks, registered trademarks, or service marks of their respective owners. BS EN 62680-2:201362680-2 IEC:2013 9 USB-IF:2006 Contributors Mark Rodda, (editor) Motorola Yoichi Nakazawa, JST Jan Fahllund, (editor) Nokia Kevin Fang,

36、 Longwell Electronics Jim Koser, (CCWG Chairman), Foxconn Morgan Jair, Main Super Co. Ed Beeman, 2010 Tech Tom Kawaguchi, Matsushita Electric Works Glen Chandler, Advanced-Connectek (Acon) Ron Ward, Matsushita Electric Works Charles Wang, Advanced-Connectek (Acon) Satoshi Yamamoto, Matsushita Electr

37、ic Works Toshinori Sasaki, Across Techno Yasuhiko Shinohara, Mitsumi Minoru Ohara, Allion Atsushi Nishio, Mitsumi Brad Brown, ATL Hitoshi Kawamura, Mitsumi Christopher Mattson, ATL Scott Sommers, Molex Marcus Darrington, ATL Kevin Delaney, Molex Jaremy Flake, ATL Technology Kieran Wright, Molex Geor

38、ge Olear, Contech Research Padraig McDaid, Molex Roy Ting, Elka Mikko Poikselka, Molex Sophia Liu, ETC Sam Liu, Newnex Technology Corp. Bill Northey, FCI Richard Petrie, Nokia Tsuneki Watanabe, Foxconn Kai Silvennoinen, Nokia Jim Zhao, Foxconn Panu Ylihaavisto, Nokia David Ko, Foxconn Arthur Zarnowi

39、tz, Palm Jong Tseng, Foxconn Douglas Riemer, SMK Jack Lu, Foxlink Eric Yagi, SMK Tim Chang, Foxlink Abid Hussain, Summit Microelectronics Sathid Inthon, Fujikura Kaz Osada, Tyco Toshi Mimura, Fujijura Masaru Ueno, Tyco Alan Berkema, Hewlett-Packard Yoshikazu Hirata, Tyco Karl Kwiat, Hirose Mark Paxs

40、on, VTM Inc. Shinya Tono, Hirose Kazu Ichikawa, Hirose Ryozo Koyama, Hirose Yousuke Takeuchi, Hirose Tsuyoshi Kitagawa, Hosiden Jim Eilers, Hosiden Kazuhiro Saito, JAE Ron Muir, JAE Mark Saubert, JAE Yasuhira Miya, JST Takahiro Diguchi, JST BS EN 62680-2:2013 10 62680-2 IEC:2013 USB-IF:2006 1 Introd

41、uction 1.1 General USB has become a popular interface for exchanging data between cell phone and portable devices. Many of these devices have become so small it is impossible to use standard USB components as defined in the USB 2.0 specification. In addition the durability requirements of the Cell P

42、hone and Portable Devices market exceed the specifications of the current interconnects. Since Cell Phones and other small Portable Devices are the largest market potential for USB, this specification is addressing this very large market while meeting all the requirements for electrical performance

43、within the USB 2.0 specification. 1.2 Objective of the Specification The purpose of this document is to define the requirements and features of a Micro-USB connector that will meet the current and future needs of the Cell Phone and Portable Devices markets, while conforming to the USB 2.0 specificat

44、ion for performance, physical size and shape of the Micro-USB interconnect. This is not a stand-alone document. Any aspects of USB that are not specifically changed by this specification are governed by the USB 2.0 Specification and USB On-The-Go Supplement. 1.3 Intended Audience/Scope Cell phone an

45、d Portable Devices have become so thin that the current Mini-USB does not fit well within the constraints of future designs. Additional requirements for a more rugged connector that will have durability past 10,000 cycles and still meet the USB 2.0 specification for mechanical and electrical perform

46、ance was also a consideration. The Mini-USB could not be modified and remain backward compatible to the existing connector as defined in the USB OTG specification. 1.4 Related Documents USB 2.0 USB OTG Supplement 2 Acronyms and Terms This chapter lists and defines terms and abbreviations used throug

47、hout this specification. A-Device A device with a Type-A plug inserted into its receptacle. The A-device supplies power to VBUS and is host at the start of a session. If the A-device is On-The-Go, it may relinquish the role of host to an On-The-Go B-device under certain conditions, Application A gen

48、eric term referring to any software that is running on a device that can control the behavior or actions of the USB port(s) on a device. B-Device A device with a Type-B plug inserted into its receptacle. The B-device is a peripheral at the start of a session. If the B-device is OTG, it may be grante

49、d the role of host from an OTG A-device. DIP-type A connector with contact and shield solder tails that are soldered through the printed circuit board FS Full Speed (max 12Mb/s) Higher than HS (480Mb/s - 5 Gb/s) BS EN 62680-2:201362680-2 IEC:2013 11 USB-IF:2006 HS High Speed (max 480 Mb/s) Host A physical entity that is attached to a USB cable and is acting in the role of the USB host as defined in the USB Specification, Revision 2.0. This entity initiates all data transactions and provides p