BS EN 62707-1-2014 LED-binning General requirements and white colour grid《发光二极管 (LED) 装箱 一般要求和白色网格》.pdf

1、BSI Standards PublicationLED-binning Part 1: General requirements and white colour gridBS EN 62707-1:2014National forewordThis British Standard is the UK implementation of EN 62707-1:2014. It isidentical to IEC 62707-1:2013. It supersedes DD IEC/PAS 62707-1:2011which is withdrawn.The UK participatio

2、n in its preparation was entrusted by TechnicalCommittee CPL/34, Lamps and Related Equipment, to SubcommitteeCPL/34/1, Electric lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provis

3、ions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 77205 4ICS 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published u

4、nder the authority of theStandards Policy and Strategy Committee on 31 March 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62707-1:2014EUROPEAN STANDARD EN 62707-1 NORME EUROPENNE EUROPISCHE NORM March 2014 CENELEC European Committee for Electrotechnical

5、Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No.

6、EN 62707-1:2014 E ICS 29.140.99 English version LED-binning - Part 1: General requirements and white colour grid (IEC 62707-1:2013) Tri des LED - Partie 1: Exigences gnrales et matrice de couleur blanche (CEI 62707-1:2013) LED-Binning - Allgemeine Anforderungen und Weifelder (IEC 62707-1:2013) This

7、European Standard was approved by CENELEC on 2014-01-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer

8、ences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

9、 CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yug

10、oslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62707-1:2014EN 62707-1:2014 - 2 - For

11、eword The text of document 34A/1702/FDIS, future edition 1 of IEC 62707-1, prepared by SC 34A, “Lamps“, of IEC/TC 34, “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62707-1:2014. The following dates are fixed: latest date by which the docum

12、ent has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-10-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-01-16 Attention is drawn to the possibility that some of the eleme

13、nts of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62707-1:2013 was approved by CENELEC as a European Standard without any modification

14、. In the official version, for Bibliography, the following notes have to be added for the standards indicated: ISO 11664-1 NOTE Harmonized as EN ISO 11664-1. ISO 11664-5 NOTE Harmonized as EN ISO 11664-5. BS EN 62707-1:2014- 3 - EN 62707-1:2014 Annex ZA (normative) Normative references to internatio

15、nal publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the

16、 referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC/TS 62504 - General lighting - LEDs and LED modules - Terms and definitions

17、- - BS EN 62707-1:2014 2 62707-1 IEC:2013 CONTENTS 1 Scope 5 2 Normative references 5 3 Terms and Definitions 5 4 Chromaticity bins for white LED packages . 6 4.1 Grid for white LED packages 6 4.2 White colour bins . 8 4.3 Code for the chromaticity of white LED packages . 8 4.3.1 Optional six digit

18、code for the designation of white colour bins 8 4.3.2 Other codes for the designation of white colour bins . 12 Annex A (informative) White binning grid coordinates for p 0 13 Annex B (informative) White binning grid coordinates for p 0 21 Bibliography 27 Figure 1 Extension of the Planckian locus be

19、yond T7 Figure 2 Example of grid points with four digit designation . 10 Figure 3 Example of white color bin ebxD68. 11 Figure 4 Detail of Figure 3 . 12 Table 1 Code for |p| . 8 Table 2 Code for |j| 9 Table 3 Code for m and n 9 Table 4 Examples for white colour bin codes 9 Table A.1 White binning gr

20、id coordinates for the grid points along the Planckian locus (p 0) 13 Table B.1 White binning grid coordinates for the grid points along the extension of the Planckian locus (p 0) . 21 BS EN 62707-1:201462707-1 IEC:2013 5 LED-BINNING Part 1: General requirements and white colour grid 1 Scope This pa

21、rt of IEC 62707 specifies general requirements, a grid and a corresponding code for the colour binning of white LED packages emitting incoherent, visible radiation. It applies for LED packages. Other parts of the IEC 62707 series covering chromaticity of coloured LED packages, luminous flux/luminous

22、 intensity, colour rendering and forward voltage are in preparation or under consideration. NOTE 1 This International Standard does not apply for LED modules, LED lamps and LED luminaires. NOTE 2 Even though the words “white light“ are used, the purpose of this International Standard is not to defin

23、e “white light“, but to specify a grid and a corresponding colour code for the colour binning of white LED packages emitting incoherent, visible radiation. The area covered by the grid may differ from the definition of white light given in other standards or regulations. 2 Normative references The f

24、ollowing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC/TS 62504

25、, General lighting LEDs and LED modules Terms and definitions 3 Terms and Definitions For the purposes of this document, the terms and definitions given in IEC/TS 62504, as well as the following apply. 3.1 bin restricted range of LED package performance characteristics used to delimit a subset of LE

26、D packages near a nominal LED package performance as identified by chromaticity, photometric performance and forward voltage 3.2 grid entity representing colour coordinates and specified by a set of grid points 3.3 grid point colour coordinate in u, v colour space (or its equivalent in the x, y colo

27、ur space) identified by two discrete indices, the first index p counting steps along the Planckian locus, and its extension beyond the high temperature boundary towards blue colours and second index j along Judd isothermal lines Note 1 to entry: The u, v colour space is specified in ISO 11664-5 CIE

28、S 014-5/E. The x, y colour space is specified in ISO 11664-1 CIE S 014-1/E. BS EN 62707-1:2014 6 62707-1 IEC:2013 3.4 white color bin area inside a quadrilateral defined by four grid points 4 Chromaticity bins for white LED packages 4.1 Grid for white LED packages The grid shall be aligned in equidi

29、stant steps along the Planckian locus, and its extension beyond the high temperature boundary towards blue colours, in the first direction (Planck-axis) and in equidistant steps along the Judd isothermal lines in the second direction (Judd-axis). The origin of the grid shall be on the Planckian locu

30、s at T(u/v) = (0,180 06/0,395 28). The distance between adjacent grid points along the Planckian locus and its extension beyond the high temperature boundary towards blue colours and along Judd isothermal lines in the u, v colour space shall be s = 0,001 74. Steps along the Planckian locus are count

31、ed with a positive index p, steps toward blue with a negative index p. Steps towards the saturated colour line (gamut) along the Judd-axis are counted with a positive index j and with negative index j in the opposite direction. NOTE 1 s = 0,0017 4 has been chosen as providing for the best alignment

32、with existing chromaticity requirements. The Planckian locus shall be extended beyond T(towards blue) as follows (see Figure 1): Quadratic Bzier locus defined by three points: P1: T(u/v) = (0,180 06/0,395 28) P2: (u/v) = (0,141 22/0,155 93) P3: (u/v) = (0,256 80/0,016 59) The Bzier locus is B(t) = P

33、1 (1-t)2+ 2P2 t (1-t) + P3 t2; t (0;1). NOTE 2 P2is the intersection of spectral locus of the u, v colour space and tangent of Planckian locus at Tin direction of blue wavelength. NOTE 3 P3corresponds to a wavelength of 380 nm on the spectral locus of the u, v colour space. BS EN 62707-1:201462707-1

34、 IEC:2013 7 0,55 0,50 0,45 0,40 0,35 0,30 0,25 0,20 0,15 0,10 0,05 0 0,1 0,2 0,3 0,4 0,5 0,6 7 000 K 12 000 K K P1= T2 000 K 3 000 K 5 000 K 0,087 0,174 0,261 0,348 P3P2v u IEC 2892/13 The decimal values at the Bezir curve give the distance from Talong the Bezir. Figure 1 Extension of the Planckian

35、locus beyond TThe coordinates uBB(p) and vBB(p) of the grid points on the Planckian locus (BB = Black Body) and the extension on the Planckian locus are given in Annex A and Annex B, as well as the unit increments uBB(p) and vBB(p) of the corresponding Judd isothermal lines. The u and v coordinates

36、of a grid point specified by the indices p and j are given by u(p, j) = uBB(p) + j uBB(p) v(p, j) = vBB(p) + j vBB(p) or u, v (p, j) = (uBB(p) + j uBB(p); vBB(p) + j vBB(p) The index (p, j) = (0, 0) corresponds to the Tpoint and the coordinates are (rounded to five digits): u (0, 0) = 0,180 06, v (0

37、, 0) = 0,395 28 or u, v (0, 0) = (0,180 06; 0,395 28) Grid points in the u, v coordinate system can be translated into equivalent grid points in the x, y coordinate system using the following equations: x(p, j) = 9u(p, j)/(6u(p, j) 16v(p, j) + 12) BS EN 62707-1:2014 8 62707-1 IEC:2013 y(p, j) = 4v(p

38、, j)/(6u(p, j) 16v(p, j) + 12) It is recommended to round grid point coordinates to 5 digits after the decimal sign. 4.2 White colour bins White colour bins are defined as the area inside a quadrilateral. An origin (p, j) and a positive step size m, n along the Planckian locus (or its extension beyo

39、nd T) and the Judd lines respectively is given. The quadrilateral is constructed by connecting the four grid points u, v (p, j), u, v (p+m, j), u, v (p, j+n) and u, v (p+m, j+n) or x, y (p, j), x, y (p+m, j), x, y (p, j+n) and x, y (p+m, j+n) It should be noted that white colour bins with step sizes

40、 of m or n equal 1 are not considered to be practical in view of measurement accuracy. 4.3 Code for the chromaticity of white LED packages 4.3.1 Optional six digit code for the designation of white colour bins Subclause 4.3.1 specifies an optional code for white colour bins using only six digits. Th

41、e first four digits are reserved for the identification of the grid point representing the origin of the white colour bin. The last two digits are reserved for the number of steps along the Planckian locus (or its extension beyond T) and the Judd lines respectively. The first digit is: “e” for p 0 a

42、nd j 0 “f” for p 0 and j 0 “g” for p 0 and j 0 “h” for p 0 and j 0 The second and third digits represent the absolute value of p starting at “aa“. Only the following letters shall be used in the counting for the second and third digit: a b c d e f g h j k l m n p r s t u v w x y z NOTE 1 The coding

43、for the second and third digit can also be found in the column “Code“ in Annex A (p 0), respectively in Annex B (p 0). The code for |p| is specified in Table 1. Table 1 Code for |p| |p| 0 1 . 7 8 . code aa ab . ah aj . The fourth digits represent the absolute value of j starting at “A“. Only the fol

44、lowing letters shall be used in the counting for the forth digit: A B C D E F G H J K L M N P R S T U V W X Y Z The code for |j| is specified in Table 2. BS EN 62707-1:201462707-1 IEC:2013 9 NOTE 2 The fourth digit is limited to |j| 22. Table 2 Code for |j| |j| 0 1 2 3 4 5 6 7 8 9 10 code A B C D E

45、F G H J K L The fifth and sixth digits represent the number of steps m and n along the Planckian locus (or its extension beyond T) and the Judd lines respectively. The following characters shall be used in the counting for the fifth and sixth digit: (1) 2 3 4 5 6 7 8 9 a b c d e f g h j k l m n p r

46、s t u v w x y z The code for m and n is specified in Table 3. NOTE 3 The fifth and sixth digit is limited to |m| 32 respectively |n| 32. Table 3 Code for m and n m, n 8 9 10 11 . code 8 9 a b . Examples for white colour bin codes are given in Table 4. Table 4 Examples for white colour bin codes p j

47、m n 6 digit code 0 0 2 3 faaA23 9 -3 5 6 eakD56 0 0 10 10 faaAaa 43 -3 6 8 ebxD68 41 -5 6 8 ebvF68 45 -1 6 8 ebzB68 An example of the codes of grid points around the Tpoint is given in Figure 2. BS EN 62707-1:2014 10 62707-1 IEC:2013 0,402 v 0,400 0,398 0,396 0,394 0,392 0,390 0,388 0,170 0,172 0,17

48、4 0,176 0,178 0,180 0,182 0,184 0,186 0,188 0,190 f e h g u fabB eacA eabA eabB faaB eaaA eaaB gabB gabA habB gacA TIEC 2893/13 Figure 2 Example of grid points with four digit designation An example of a 6 by 8 white color bin with the six digit code is given in Figure 3. BS EN 62707-1:201462707-1 I

49、EC:2013 11 v 0,490 u ebxD 0,485 0,480 0,475 0,470 0,465 0,460 0,455 0,180 0,185 0,190 0,195 0,200 0,205 0,210 0,215 0,220 0,225 Figure 4 IEC 2894/13 The pale curve represents the Planckian locus. Figure 3 Example of white color bin ebxD68 Figure 4 is a detail of Figure 3 and shows the very small difference between the grid lin