BS EN 62769-103-1-2015 Field Device Integration (FDI) Profiles PROFIBUS《现场设备集成 (FDI) 简介 PROFIBUS》.pdf

1、BSI Standards PublicationField Device Integration (FDI)Part 103-1: Profiles PROFIBUSBS EN 62769-103-1:2015National forewordThis British Standard is the UK implementation of EN 62769-103-1:2015. Itis identical to IEC 62769-103-1:2015.The UK participation in its preparation was entrusted to TechnicalC

2、ommittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible

3、 for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82590 3ICS 25.040.40; 35.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandar

4、ds Policy and Strategy Committee on 31 October 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62769-103-1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62769-103-1 June 2015 ICS 25.040.40; 35.100 English Version Field Device Integration (FDI) -

5、Part 103-1: Profiles - PROFIBUS (IEC 62769-103-1:2015) Intgration des appareils de terrain (FDI) - Partie 103-1: Profils - PROFIBUS (IEC 62769-103-1:2015) Feldgerteintegration (FDI) - Profile - Teil 103-1: PROFIBUS (IEC 62769-103-1:2015) This European Standard was approved by CENELEC on 2015-06-16.

6、CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained

7、on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the

8、 CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hun

9、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechni

10、que Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62769-103-1:2015 E BS EN 62769-103-1:2015EN 62769-103-1:2015

11、2 European foreword The text of document 65E/354/CDV, future edition 1 of IEC 62769-103-1, prepared by SC 65E “Devices and integration in enterprise systems“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC

12、as EN 62769-103-1:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-03-16 latest date by which the national standards conflicting with the document have to be wi

13、thdrawn (dow) 2018-06-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC

14、 62769-103-1:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 61804-3 NOTE Harmonized as EN 61804-3 1)(not modified). 1) To be published. BS EN 62769-103-1:2015

15、EN 62769-103-1:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only

16、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on t

17、he latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61784-1 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 - IEC 61804 series Function blocks (FB) for process control - Elect

18、ronic device description language (EDDL) EN 61804 series IEC 62541-100 2015 OPC unified architecture - Part 100: Device Interface EN 62541-100 2015 IEC 62769-2 - Field Device Integration (FDI) - Part 2: FDI Client EN 62769-2 2)- IEC 62769-4 - Field Device Integration (FDI) - Part 4: FDI Packages EN

19、62769-4 2)- IEC 62769-5 - Field Device Integration (FDI) - Part 5: FDI Information Model EN 62769-5 2)- IEC 62769-7 - Field Device Integration (FDI) - Part 7: FDI Communication Devices EN 62769-7 2)- 2) To be published. BS EN 62769-103-1:2015 2 IEC 62769-103-1:2015 IEC 2015 CONTENTS FOREWORD . 4 INT

20、RODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, abbreviated terms and acronyms . 8 3.1 Terms and definitions 8 3.2 Abbreviated terms and acronyms 8 4 Conventions 8 4.1 EDDL syntax . 8 4.2 XML syntax . 8 4.3 Capitalizations 8 5 Profile for PROFIBUS 9 5.1 General . 9 5.2 Catalog

21、 profile 9 5.2.1 Protocol support file . 9 5.2.2 CommunicationProfile definition . 9 5.2.3 Profile device . 10 5.2.4 Protocol version information 10 5.3 Associating a Package with a device . 11 5.3.1 Device type identification mapping . 11 5.3.2 Device type revision mapping 12 5.4 Information Model

22、mapping . 13 5.4.1 ProtocolType definition 13 5.4.2 DeviceType mapping . 14 5.4.3 FunctionalGroup identification definition 14 5.5 Topology elements 15 5.5.1 ConnectionPoint definition . 15 5.5.2 Communication Device definition . 17 5.5.3 Communication service provider definition . 18 5.5.4 Network

23、definition 18 5.6 Methods 19 5.6.1 Methods for FDI Communication Servers . 19 5.6.2 Methods for Gateways . 21 (normative) Topology Scan result schema . 28 Annex AA.1 General . 28 A.2 Network 28 A.3 ProfibusNetworkT . 28 A.4 ProfibusConnectionPointT . 28 A.5 ProfibusIdentificationT 29 A.6 ProfibusAdd

24、ressT . 30 (normative) Transfer service parameters 31 Annex BB.1 General . 31 B.2 sendData 31 B.3 xsreceiveData . 31 B.4 xsTransferSendDataT . 31 BS EN 62769-103-1:2015IEC 62769-103-1:2015 IEC 2015 3 B.5 TransferResultDataT . 32 B.6 OperationT 32 Bibliography 33 Figure 1 Version mapping problem . 12

25、 Table 1 ProtocolSupportFile for FDI Device Packages . 9 Table 2 ProtocolSupportFile for FDI Communication Packages 9 Table 3 PROFIBUS CommunicationProfile definition schema . 10 Table 4 Catalog values for profile devices 10 Table 5 Version mapping examples 11 Table 6 Device identification informati

26、on mapping 12 Table 7 Protocol type Profibus_DP 13 Table 8 Protocol type Profibus_PA . 14 Table 9 DeviceType property mapping . 14 Table 10 PROFIBUS Device Types identification attributes 14 Table 11 ConnectionPoint type for Profibus_DP . 15 Table 12 ConnectionPoint type for Profibus_PA . 16 Table 1

27、3 Method Connect arguments . 19 Table 14 Method Disconnect arguments 19 Table 15 Method Transfer arguments . 20 Table 16 Method SetAddress arguments 21 Table 17 Connect service arguments . 22 Table 18 Method Transfer arguments . 25 Table 19 Method SetAddress arguments 26 Table A.1 Elements of Profib

28、usNetworkT . 28 Table A.2 Attributes of ProfibusConnectionPointT 29 Table A.3 Elements of ProfibusConnectionPointT 29 Table A.4 Attributes of ProfibusIdentificationT 30 Table B.1 Attributes of TransferSendDataT 32 Table B.2 Attributes of TransferResultDataT 32 BS EN 62769-103-1:2015 4 IEC 62769-103-

29、1:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIELD DEVICE INTEGRATION (FDI) Part 103-1: Profiles PROFIBUS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National C

30、ommittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Av

31、ailable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental

32、organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on techni

33、cal matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC

34、 National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniform

35、ity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IE

36、C itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure

37、that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any

38、nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the refere

39、nced publications is indispensable for the correct application of this publication. International Standard IEC 62769-103-1 has been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. The

40、text of this standard is based on the following documents: CDV Report on voting 65E/354/CDV 65E/417/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC

41、 Directives, Part 2. A list of all parts in the IEC 62769 series, published under the general title Field Device Integration (FDI), can be found on the IEC website. BS EN 62769-103-1:2015IEC 62769-103-1:2015 IEC 2015 5 The committee has decided that the contents of this publication will remain uncha

42、nged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of thi

43、s publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 62769-103-1:2015 6 IEC 62769-103-1:2015 IEC 2015 INTRODUCTION The International Electrotechnical

44、Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents concerning a) method for the supplying and installation of device-specific functionalities, see Patent Family DE10357276; b) method and device for accessing a functional

45、module of automation system, see Patent Family EP2182418; c) methods and apparatus to reduce memory requirements for process control system software applications, see Patent Family US2013232186; d) extensible device object model, see Patent Family US12/893,680. IEC takes no position concerning the e

46、vidence, validity and scope of this patent right. The holders of these patent rights have assured the IEC that he/she is willing to negotiate licences either free of charge or under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the stat

47、ement of the holder of this patent right is registered with IEC. Information may be obtained from: a) ABB Research Ltd Claes Rytoft Affolterstrasse 4 Zurich, 8050 Switzerland b) Phoenix Contact GmbH available at 1PROFIBUS is the trade name of the non-profit consortium PROFIBUS PROFIBUS DP/V1; PROFIB

48、US DP/V2 “profibus_pa” PROFIBUS PA 5.2.3 Profile device A Profile Package shall provide the catalog values for profile devices, enabling the FDI Server to leverage a generic device description, if a specific one is not available. The definitions in Table 4 focus on catalog content that is vendor ind

49、ependent. Table 4 Catalog values for profile devices Element Attribute Content PackageType Profile CommunicationProfile Empty DeviceModel The allowed profile identifier values (PROFILE_ID) are provided by PROFIBUS CLASSIFICATION NETWORK_CONNECTION_POINT; CAN_DELETE FALSE; PROTOCOL Profibus_DP; CONNECTION_POINT ConnectionPoint VARIABLE Address LABEL “Station address“; HELP “Address of the PROFIBUS slave“; TYPE UNSIGNED_INTEGER(