BS EN 62769-7-2015 Field Device Integration (FDI) FDI Communication Devices《现场设备集成 (FDI) FDI通信设备》.pdf

1、BSI Standards PublicationField Device Integration (FDI)Part 7: FDI Communication DevicesBS EN 62769-7:2015National forewordThis British Standard is the UK implementation of EN 62769-7:2015. It isidentical to IEC 62769-7:2015.The UK participation in its preparation was entrusted to TechnicalCommittee

2、 AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its

3、 correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 78329 6ICS 25.040.40; 35.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Polic

4、y and Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62769-7:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62769-7 June 2015 ICS 25.040.40; 35.100 English Version Field Device Integration (FDI) - Part 7: FDI Communi

5、cation Devices (IEC 62769-7:2015) Intgration des appareils de terrain (FDI) - Partie 7: Appareils de communication FDI (IEC 62769-7:2015) Feldgerteintegration (FDI) - Teil 7: Kommunikationsgerte (IEC 62769-7:2015) This European Standard was approved by CENELEC on 2015-06-16. CENELEC members are boun

6、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE

7、N-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management

8、Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,

9、Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee

10、fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62769-7:2015 E BS EN 62769-7:2015EN 62769-7:2015 2 European foreword The text of docu

11、ment 65E/350/CDV, future edition 1 of IEC 62769-7, prepared by SC 65E “Devices and integration in enterprise systems” of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62769-7:2015. The following dates a

12、re fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-03-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-06-16 Attention is drawn t

13、o the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62769-7:2015 was approved by CENELEC as a Eu

14、ropean Standard without any modification. BS EN 62769-7:2015EN 62769-7:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indis

15、pensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the re

16、levant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61804-3 - Function Blocks (FB) for process control - Part 3: Electronic Device Description Language (EDDL

17、) EN 61804-3 - IEC 61804-4 - Function blocks (FB) for process control - Part 4: EDD interpretation - - IEC 62541-4 - OPC Unified Architecture - Part 4: Services EN 62541-4 - IEC 62541-6 - OPC unified architecture - Part 6: Mappings EN 62541-6 - IEC 62541-7 - OPC unified architecture - Part 7: Profil

18、es EN 62541-7 - IEC 62541 series OPC Unified Architecture EN 62541 series IEC 62541-100 - OPC unified architecture - Part 100: Device Interface EN 62541-100 - IEC 62769-1 - Devices and integration in enterprise systems; Field Device Integration - Part 1: Overview - - IEC 62769-2 - Devices and integr

19、ation in enterprise systems; Field Device Integration - Part 2: FDI Client - - IEC 62769-3 - Devices and integration in enterprise systems; Field Device Integration - Part 3: FDI Server - - IEC 62769-4 2015 Devices and integration in enterprise systems; Field Device Integration - Part 4: FDI Package

20、s - - IEC 62769-5 - Devices and integration in enterprise systems; Field Device Integration - Part 5: FDI Information Model - - IEC/TR 62541-1 - OPC unified architecture - Part 1: Overview and concepts CLC/TR 62541-1 - BS EN 62769-7:2015 2 IEC 62769-7:2015 IEC 2015 CONTENTS FOREWORD . 6 INTRODUCTION

21、 . 8 1 Scope 9 2 Normative references 9 3 Terms, definitions, abbreviated terms, acronyms and conventions . 10 3.1 Terms and definitions 10 3.2 Abbreviated terms and acronyms 11 3.3 Conventions for graphical notation 11 4 General . 11 5 FDI Communication Package . 13 5.1 General . 13 5.2 EDD 13 5.2.

22、1 General rules . 13 5.2.2 Device component . 14 5.2.3 CommunicationDevice component . 15 5.2.4 Communication service provider component 16 5.2.5 Connection Point component . 17 5.2.6 Connection Point collection 18 5.2.7 Network component . 18 5.2.8 ValidateNetwork 19 5.2.9 ValidateModules 20 5.2.10

23、 UIP specifics . 21 5.2.11 Deployment . 21 6 Communication relations . 21 7 FDI Communication Server definition . 22 7.1 General . 22 7.2 General characteristics . 22 7.3 Information Model . 23 7.3.1 General . 23 7.3.2 CommunicationServerType 25 7.3.3 ServerCommunicationDeviceType . 29 7.3.4 ServerC

24、ommunicationServiceType 33 7.4 OPC UA Server Profile for FDI Communication Server 37 7.5 Mapping the FDI Server IM to the FDI Communication Server IM 37 7.5.1 General . 37 7.5.2 Information Model differences 37 7.6 Installer. 39 7.7 FDI Communication Package 39 7.7.1 General . 39 7.7.2 EDD for Light

25、weight Communication Server. 39 7.7.3 EDD for Multi-Channel Communication Server . 40 7.7.4 Documentation 40 7.8 Handling and behavior 40 7.8.1 General . 40 7.8.2 Deployment . 41 BS EN 62769-7:2015IEC 62769-7:2015 IEC 2015 3 7.8.3 Server configuration 41 7.8.4 Start up . 42 7.8.5 Shutdown 42 7.8.6 W

26、atchdog 42 7.8.7 Establish the OPC UA connection 42 7.8.8 Instantiate the Communication Server . 43 7.8.9 Configure the communication hardware . 43 7.8.10 Configure the Network . 43 7.8.11 Parameterize . 43 7.8.12 Initialize . 43 7.8.13 Create the communication service object . 43 7.8.14 Communicati

27、on relation . 44 7.8.15 Connect . 44 7.8.16 Disconnect 45 7.8.17 Abort indication . 45 7.8.18 Scan 45 7.8.19 SetAddress 45 8 FDI Communication Gateway definition . 45 8.1 General . 45 8.2 Information Model . 45 8.2.1 General . 45 8.2.2 CommunicationGatewayType 46 8.2.3 GatewayCommunicationDeviceType

28、 47 8.2.4 GatewayCommunicationServiceType . 50 8.3 FDI Communication Package 54 8.3.1 General . 54 8.3.2 EDD 54 8.4 Handling and behavior 56 8.4.1 General . 56 8.4.2 Deployment . 57 8.4.3 Start up . 57 8.4.4 Configure the communication hardware . 57 8.4.5 Configure the Network . 57 8.4.6 Parameteriz

29、e . 57 8.4.7 Communication relation . 57 8.4.8 Connect . 57 8.4.9 Disconnect 57 8.4.10 Abort indication . 58 8.4.11 Scan 58 8.4.12 Communication Error Handling 58 Annex A (informative) Layered protocols 59 A.1 General . 59 A.2 Convention for protocol specific annex creation 59 A.2.1 Connection Point

30、 . 59 A.3 FDI Communication Package definition . 60 A.3.1 Communication services 60 A.3.2 Connection Point . 60 A.3.3 Network . 60 A.4 Representation in the IM . 61 BS EN 62769-7:2015 4 IEC 62769-7:2015 IEC 2015 Annex B (normative) Namespace and Mappings 62 Bibliography 63 Figure 1 FDI architecture

31、diagram 9 Figure 2 FDI communication infrastructure architecture . 12 Figure 3 Communication relation 21 Figure 4 Communication relation state chart 22 Figure 5 FDI Communication Server AddressSpace . 24 Figure 6 CommunicationServerType 25 Figure 7 ServerCommunicationDeviceType 29 Figure 8 ServerCom

32、municationServiceType . 33 Figure 9 Information Model differences (example) 38 Figure 10 FDI Communication Server state machine 41 Figure 11 Communication relation state chart 44 Figure 12 Gateway information model 46 Figure 13 CommunicationGatewayType . 47 Figure 14 GatewayCommunicationDeviceType 4

33、8 Figure 15 GatewayCommunicationServiceType . 51 Figure 16 Nested Communication 56 Table 1 ValidateNetwork Action arguments 20 Table 2 ValidateModules Action arguments 20 Table 3 CommunicationServerType definition 25 Table 4 MethodSet of CommunicationServerType 25 Table 5 Reset Method arguments 26 T

34、able 6 Reset Method AddressSpace definition . 26 Table 7 Initialize Method arguments . 27 Table 8 Initialize Method AddressSpace definition . 27 Table 9 AddComponent Method arguments 28 Table 10 AddComponent Method AddressSpace definition . 28 Table 11 RemoveComponent Method arguments . 29 Table 12

35、RemoveComponent Method AddressSpace definition 29 Table 13 ServerCommunicationDeviceType definition 30 Table 14 MethodSet of ServerCommunicationDeviceType 30 Table 15 Scan Method arguments 31 Table 16 Scan Method AddressSpace definition . 31 Table 17 ResetScan Method arguments . 31 Table 18 ResetSca

36、n Method AddressSpace definition 32 Table 19 SetAddress Method arguments 32 Table 20 ServerCommunicationServiceType definition . 33 Table 21 MethodSet of ServerCommunicationServiceType 34 Table 22 Connect Method arguments . 35 Table 23 Disconnect Method arguments 35 BS EN 62769-7:2015IEC 62769-7:201

37、5 IEC 2015 5 Table 24 Transfer Method arguments . 36 Table 25 GetPublishedData Method arguments 37 Table 26 FDICommunicationServer_Facet definition 37 Table 27 CommunicationGatewayType definition . 47 Table 28 GatewayCommunicationDeviceType definition . 48 Table 29 MethodSet of GatewayCommunicationD

38、eviceType . 48 Table 30 Scan Method arguments 49 Table 31 Scan Method AddressSpace definition . 49 Table 32 ScanNext Method arguments . 50 Table 33 ScanNext Method AddressSpace definition . 50 Table 34 GatewayCommunicationServiceType definition 51 Table 35 MethodSet of GatewayCommunicationServiceTyp

39、e . 52 Table 36 Connect Method arguments . 53 Table 37 Transfer Method arguments . 54 BS EN 62769-7:2015 6 IEC 62769-7:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIELD DEVICE INTEGRATION (FDI) Part 7: FDI Communication Devices FOREWORD 1) The International Electrotechnical Commission

40、(IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addi

41、tion to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interes

42、ted in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with

43、 conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IE

44、C National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for

45、the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between a

46、ny IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conform

47、ity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members

48、 of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or a

49、ny other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. International Standard IEC 62769-7 has been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and a