BS EN 62788-1-6-2017 Measurement procedures for materials used in photovoltaic modules Encapsulants Test methods for determining the degree of cure in Ethylene-Vinyl Acetate《光伏模组使用.pdf

1、Measurement procedures for materials used in photovoltaic modulesPart 1-6: Encapsulants Test methods for determining the degree of cure in Ethylene-Vinyl AcetateBS EN 62788-1-6:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EURO

2、PISCHE NORM EN 62788-1-6 May 2017 ICS 27.160 English Version Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate (IEC 62788-1-6:2017) Procdures de mesure des matriaux utiliss dans les m

3、odules photovoltaques - Partie 1-6: Encapsulants - Mthodes dessai pour dterminer le degr de durcissement dans lthylne-actate de vinyle (IEC 62788-1-6:2017) Werkstoffe, die in photovoltaischen Modulen verwendet werden - Messverfahren - Teil 1-6: Verkapselungsstoffe - Prfverfahren zur Bestimmung des A

4、ushrtungsgrads der Ethylen-Vinyl-Acetat-Verkapselung (IEC 62788-1-6:2017) This European Standard was approved by CENELEC on 2017-03-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio

5、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A

6、version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulga

7、ria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

8、Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitatio

9、n in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62788-1-6:2017 E National forewordThis British Standard is the UK implementation of EN 62788-1-6:2017. It is identical to IEC 62788-1-6:2017. The UK participation in its preparation was entrusted to Technical Committe

10、e GEL/82, Photovoltaic Energy Systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards In

11、stitution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 87348 5ICS 27.160Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/co

12、rrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62788-1-6:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62788-1-6 May 2017 ICS 27.160 English Version Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for dete

13、rmining the degree of cure in Ethylene-Vinyl Acetate (IEC 62788-1-6:2017) Procdures de mesure des matriaux utiliss dans les modules photovoltaques - Partie 1-6: Encapsulants - Mthodes dessai pour dterminer le degr de durcissement dans lthylne-actate de vinyle (IEC 62788-1-6:2017) Werkstoffe, die in

14、photovoltaischen Modulen verwendet werden - Messverfahren - Teil 1-6: Verkapselungsstoffe - Prfverfahren zur Bestimmung des Aushrtungsgrads der Ethylen-Vinyl-Acetat-Verkapselung (IEC 62788-1-6:2017) This European Standard was approved by CENELEC on 2017-03-03. CENELEC members are bound to comply wit

15、h the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manag

16、ement Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

17、same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

18、Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elek

19、trotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62788-1-6:2017 E BS EN 62788-1-6:2017EN 62788-1-6:2017 2 European foreword The text of docum

20、ent 82/1197/FDIS, future edition 1 of IEC 62788-1-6, prepared by IEC/TC 82 “Solar photovoltaic energy systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62788-1-6:2017. The following dates are fixed: latest date by which the document has to be implemented at nation

21、al level by publication of an identical national standard or by endorsement (dop) 2017-12-03 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-03-03 Attention is drawn to the possibility that some of the elements of this document may be the sub

22、ject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62788-1-6:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bi

23、bliography, the following notes have to be added for the standards indicated: IEC 61215 (series) NOTE Harmonized as EN 61215 (series). ISO 11357-2 NOTE Harmonized as EN ISO 11357-2. ISO 11357-3 NOTE Harmonized as EN ISO 11357-3. BS EN 62788-1-6:2017EN 62788-1-6:2017 2 European foreword The text of d

24、ocument 82/1197/FDIS, future edition 1 of IEC 62788-1-6, prepared by IEC/TC 82 “Solar photovoltaic energy systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62788-1-6:2017. The following dates are fixed: latest date by which the document has to be implemented at na

25、tional level by publication of an identical national standard or by endorsement (dop) 2017-12-03 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-03-03 Attention is drawn to the possibility that some of the elements of this document may be the

26、 subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62788-1-6:2017 was approved by CENELEC as a European Standard without any modification. In the official version, fo

27、r Bibliography, the following notes have to be added for the standards indicated: IEC 61215 (series) NOTE Harmonized as EN 61215 (series). ISO 11357-2 NOTE Harmonized as EN ISO 11357-2. ISO 11357-3 NOTE Harmonized as EN ISO 11357-3. EN 62788-1-6:2017 3 Annex ZA (normative) Normative references to in

28、ternational publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest editio

29、n of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is

30、available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61215-1 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements EN 61215-1 - ISO 291 2008 Plastics - Standard atmospheres for conditioning and testing EN ISO 291 2008 ISO 6427 2

31、013 Plastics - Determination of matter extractable by organic solvents (conventional methods) EN ISO 6427 2014 ISO 10147 - Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content EN ISO 10147 2012 ISO 11357-1 2009 Plas

32、tics - Differential scanning calorimetry (DSC) - Part 1: General principles - - ISO/IEC 17025 2005 General requirements for the competence of testing and calibration laboratories EN ISO/IEC 17025 2005 ASTM D2765-11 - Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslink

33、ed Ethylene Plastics - - BS EN 62788-1-6:2017This page deliberately left blank 2 IEC 62788-1-6:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Principle 7 5 DSC secondary method . 8 5.1 Instrument and equipment for the secondary method 8 5.1.1 Gener

34、al . 8 5.1.2 Electronic balance . 8 5.1.3 Differential scanning calorimeter 8 5.1.4 Instrument calibration 8 5.2 Specimen preparation for the secondary method. 9 5.2.1 Sampling and storage 9 5.2.2 Preparation procedures . 9 5.3 Test requirements for the secondary method 9 5.3.1 Environment requireme

35、nts . 9 5.3.2 Parameter settings (residual enthalpy method) 10 5.3.3 Parameter settings (melt/freeze method) . 10 5.3.4 Parameter settings (combined enthalpy and melt/freeze method) 10 5.4 Test procedure for the secondary method . 11 5.5 Calculation and expression of the results for the secondary me

36、thod . 11 5.5.1 Enthalpy method 11 5.5.2 Melt/freeze method 12 5.6 Uncertainty of measurements for the secondary method . 16 6 The primary method . 16 6.1 Principle for the primary method . 16 6.2 Instrument and equipment for the primary method 17 6.2.1 Electronic balance . 17 6.2.2 Soxhlet extracto

37、r . 17 6.2.3 Thimble . 17 6.2.4 Heating apparatus . 17 6.2.5 Handling apparatus 18 6.2.6 Solvent 18 6.3 Specimen preparation for the primary method . 18 6.3.1 Sampling and storage 18 6.3.2 Preparation procedures . 18 6.4 Test requirements for the primary method Environment requirements 19 6.5 Test p

38、rocedure for the primary method 19 6.6 Calculation and expression of the results for the primary method 19 7 Test report . 19 Annex A (informative) Limitations of the primary and secondary measurement methods21 Bibliography 23 Figure 1 Example result for the DSC residual enthalpy method 12 2 IEC 627

39、88-1-6:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Principle 7 5 DSC secondary method . 8 5.1 Instrument and equipment for the secondary method 8 5.1.1 General . 8 5.1.2 Electronic balance . 8 5.1.3 Differential scanning calorimeter 8 5.1.4 Inst

40、rument calibration 8 5.2 Specimen preparation for the secondary method. 9 5.2.1 Sampling and storage 9 5.2.2 Preparation procedures . 9 5.3 Test requirements for the secondary method 9 5.3.1 Environment requirements . 9 5.3.2 Parameter settings (residual enthalpy method) 10 5.3.3 Parameter settings

41、(melt/freeze method) . 10 5.3.4 Parameter settings (combined enthalpy and melt/freeze method) 10 5.4 Test procedure for the secondary method . 11 5.5 Calculation and expression of the results for the secondary method . 11 5.5.1 Enthalpy method 11 5.5.2 Melt/freeze method 12 5.6 Uncertainty of measur

42、ements for the secondary method . 16 6 The primary method . 16 6.1 Principle for the primary method . 16 6.2 Instrument and equipment for the primary method 17 6.2.1 Electronic balance . 17 6.2.2 Soxhlet extractor . 17 6.2.3 Thimble . 17 6.2.4 Heating apparatus . 17 6.2.5 Handling apparatus 18 6.2.6

43、 Solvent 18 6.3 Specimen preparation for the primary method . 18 6.3.1 Sampling and storage 18 6.3.2 Preparation procedures . 18 6.4 Test requirements for the primary method Environment requirements 19 6.5 Test procedure for the primary method 19 6.6 Calculation and expression of the results for the

44、 primary method 19 7 Test report . 19 Annex A (informative) Limitations of the primary and secondary measurement methods21 Bibliography 23 Figure 1 Example result for the DSC residual enthalpy method 12 BS EN 62788-1-6:2017IEC 62788-1-6:2017 IEC 2017 3 Figure 2 Location of temperatures and temperatu

45、re ranges used in the melt/freeze DSC method . 13 Figure 3 Example of the temperature bounds applied for an automated software integration algorithm . 14 Figure 4 Representation of the measurement profile for an EVA test specimen 16 Table 1 Summary of the results for the example measurements shown i

46、n Figure 2 14 BS EN 62788-1-6:2017IEC 62788-1-6:2017 IEC 2017 3 Figure 2 Location of temperatures and temperature ranges used in the melt/freeze DSC method . 13 Figure 3 Example of the temperature bounds applied for an automated software integration algorithm . 14 Figure 4 Representation of the meas

47、urement profile for an EVA test specimen 16 Table 1 Summary of the results for the example measurements shown in Figure 2 14 4 IEC 62788-1-6:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES Part 1-6: Encapsulants Test methods

48、 for determining the degree of cure in Ethylene-Vinyl Acetate FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international c

49、o-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participat