BS EN 62841-2-2-2014 Electric motor-operated hand-held tools transportable tools and lawn and garden machinery Safety Particular requirements for hand-held screwdrivers and impact .pdf

1、BSI Standards PublicationElectric motor-operated hand-held tools, transportabletools and lawn and gardenmachinery SafetyPart 2-2: Particular requirements for hand-held screwdrivers and impact wrenchesBS EN 62841-2-2:2014BS EN 62841-2-2:2014Incorporating corrigendum October 2015BS EN 62841-2-2:2014 I

2、ncorporating corrigenda October 2015BS EN 62841-2-2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 62841-2-2:2014. It is identical to IEC 62841-2-2:2014, incorporating corrigendum October 2015. It supersedes BS EN 60745-2-2:2010 which will be withdrawn on

3、21 August 2019.NOTE: The BS EN 62841 series supersedes the BS EN 60745 series, the BS EN 61029 series and parts of the BS EN 60335 series (for lawn and garden machinery). BS EN 62841-1:2015 supersedes BS EN 60745-1:2009 and BS EN 61029-1:2009. A withdrawal date for BS EN 60745-1:2009 and BS EN 61029

4、-1:2009 will be fixed upon publication of all standards in the BS EN 62841-2 and BS EN 62841-3 series.The UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtained on

5、 request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 92422 4ICS 25.140.20Compliance with a Br

6、itish Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2014.Amendments/corrigenda issued since publicationDate Text affected31 October 2015 Correction to supersession details in

7、national foreword29 February 2016 Implementation of IEC corrigendum October 2015: Table 4 correctedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-2-2 August 2014 ICS 25.140.20 Supersedes EN 60745-2-2:2010 English Version Electric motor-operated hand-held tools, transportable tools and la

8、wn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014) Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 2-2: Rgles particulires pour les visseuses et les cls chocs

9、portatives (CEI 62841-2-2:2014) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-2: Besondere Anforderungen fr handgefhrte Schrauber und Schlagschrauber (IEC 62841-2-2:2014) This European Standard was approved by CENELEC

10、on 2014-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m

11、ay be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and

12、notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germa

13、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisatio

14、n Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-2-2:2014 E BS EN 62841-2-2:2014EN 62841-

15、2-2:2014 - 2 - Foreword The text of document 116/162/FDIS, future edition 1 of IEC 62841-2-2, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-2:2014. A draft amendment, which covers common modificat

16、ions to IEC 62841-2-2:2014, was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which this document has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop) 20

17、15-06-26 latest date by which the national standards conflictingwith this document have to be withdrawn(dow) 2018-06-26 This document supersedes EN 60745-2-2:2010. This European Standard is divided into four parts: Part 1: General requirements which are common to most hand-held electric motor operat

18、ed tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characte

19、ristics of these specific tools. This Part 2 is to be used in conjunction with EN 62841-1:201X. This Part 2 supplements or modifies the corresponding clauses in EN 62841-1:201X, so as to convert it into the European Standard: Particular requirements for hand-held screwdrivers and impact wrenches. Wh

20、ere a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies as far as reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. Compliance with the clauses of Part 1 together with this

21、 Part 2 provides one means of conforming with the essential health and safety requirements of the Directive concerned. Warning: Other requirements and other EU Directives can be applicable to the products falling within the scope of this standard. This European Standard follows the overall requireme

22、nts of EN ISO 12100. The following print types are used: - requirements; in roman type - test specifications: in italic type; - notes: in smaller roman type. BS EN 62841-2-2:2014EN 62841-2-2:2014 - 2 - Foreword The text of document 116/162/FDIS, future edition 1 of IEC 62841-2-2, prepared by IEC/TC

23、116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-2:2014. A draft amendment, which covers common modifications to IEC 62841-2-2:2014, was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by

24、CENELEC. The following dates are fixed: latest date by which this document has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop) 2015-06-26 latest date by which the national standards conflictingwith this document have to be withdrawn(dow) 2018

25、-06-26 This document supersedes EN 60745-2-2:2010. This European Standard is divided into four parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this

26、 standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 2 is to be used in conjunction with EN 62841-1:201X. This Part 2 suppl

27、ements or modifies the corresponding clauses in EN 62841-1:201X, so as to convert it into the European Standard: Particular requirements for hand-held screwdrivers and impact wrenches. Where a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies as far as reasonable

28、. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and safety requirements of the Directive conce

29、rned. Warning: Other requirements and other EU Directives can be applicable to the products falling within the scope of this standard. This European Standard follows the overall requirements of EN ISO 12100. The following print types are used: - requirements; in roman type - test specifications: in

30、italic type; - notes: in smaller roman type. BS EN 62841-2-2:2014- -C “.s- 3 - EN 62841-2-2:2014 The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101. Clauses, subclauses, notes, table

31、s, figures and annexes which are additional to those in IEC 62841-2-2:2014 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent r

32、ights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this do

33、cument. BS EN 62841-2-2:2014EN 62841-2-2:2014 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicati

34、on. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. This a

35、nnex from Part 1 is applicable with the following addition: Publication Year Title Year ISO 28927-2 2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers EN/HD EN ISO 28927-2 2009 Annex ZZ (informative) Coverage of Ess

36、ential Requirements of Directive 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (M

37、achinery Directive). Compliance with this standard provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN 62841-2-2:

38、2014EN 62841-2-2:2014 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references

39、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. This annex from Part 1 is appl

40、icable with the following addition: Publication Year Title Year ISO 28927-2 2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers EN/HD EN ISO 28927-2 2009 Annex ZZ (informative) Coverage of Essential Requirements of D

41、irective 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Com

42、pliance with this standard provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN 62841-2-2:2014- -COMMON MODIFICATI

43、ONSReplace the title of Annex I by the following:Annex I(normative)Measurement of noise and vibration emissionsAdd the following annexes:Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThe following documents, in whole or in part, ar

44、e normatively referenced in this document and areindispensable for its application. For dated references, only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including any amendments) applies.NOTE When an international publication has been modified b

45、y common modifications, indicated by (mod), therelevant EN/HD applies.This annex from Part 1 is applicable with the following addition:Publication Year Title EN/HD YearISO 28927-2 2009 Hand-held portable power tools - Testmethods for evaluation of vibration emission -Part 2: Wrenches, nutrunners and

46、 screwdriversEN ISO 28927-2 2009Annex ZZ(informative)Coverage of Essential Requirements of Directive 2006/42/ECThis European Standard has been prepared under a mandate given to CENELEC by the EuropeanCommission and the European Free Trade Association and within its scope the standard covers allrelev

47、ant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive).Compliance with this standard provides one means of conformity with the specified essentialrequirements of the Directives concerned.WARNING: Other requirements and other EU Directives may be applicable to the produc

48、ts falling within the scope of this standard. 2 IEC 62841-2-2:2014 IEC 2014 CONTENTS 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 General requirements 6 5 General conditions for the tests . 6 6 Radiation, toxicity and similar hazards . 6 7 Classification . 6 8 Marking and instructi

49、ons 6 9 Protection against access to live parts . 6 10 Starting . 6 11 Input and current . 6 12 Heating 6 13 Resistance to heat and fire 7 14 Moisture resistance . 7 15 Resistance to rusting . 7 16 Overload protection of transformers and associated circuits 7 17 Endurance . 7 18 Abnormal operation . 8 19 Mechanical hazards . 8 20 Mechanical strength 8 21 Construction 9 22 Internal wiring 9 23 Components 9 24 Supply connection and external flexible cords . 9 25 Terminals for external conductors 9 26 Provision for earthing 9 27 Screws and connections 9