BS EN 62841-3-6-2014 Electric motor-operated hand-held tools transportable tools and lawn and garden machinery Safety Particular requirements for transportable diamond drills with .pdf

1、BSI Standards PublicationElectric motor-operated hand-held tools, transportabletools and lawn and gardenmachinery SafetyPart 3-6: Particular requirements for transportable diamond drills with liquid systemBS EN 62841-3-6:2014BS EN 62841-3-6:2014Incorporating corrigendum October 2015BS EN 62841-3-6:2

2、014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 62841-3-6:2014. It is identical to IEC 62841-3-6:2014. It supersedes BS EN 61029-2-6:2010, which will be withdrawn on 21 August 2019. NOTE: The BS EN 62841 series supersedes the BS EN 60745 series, the BS EN 61

3、029 series and parts of the BS EN 60335 series (for lawn and garden machinery). BS EN 62841-1:2015 supersedes BS EN 60745-1:2009 and BS EN 61029-1:2009. A withdrawal date for BS EN 60745-1:2009 and BS EN 61029-1:2009 will be fixed upon publication of all standards in the BS EN 62841-2 and BS EN 6284

4、1-3 series.The UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards I

5、nstitution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 91202 3ICS 25.140.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2014.Amen

6、dments/corrigenda issued since publicationDate Text affected31 October 2015 Correction to supersession details in national forewordEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-3-6 August 2014 ICS 25.140.20 Supersedes EN 61029-2-6:2010 English Version Electric motor-operated hand-held t

7、ools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014) Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 3-6: Exigences particul

8、ires pour les forets diamants transportables avec systme liquide (CEI 62841-3-6:2014) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-6: Besondere Anforderungen fr transportable Diamantbohrmaschinen mit Flssigkeitssystem

9、 (IEC 62841-3-6:2014) This European Standard was approved by CENELEC on 2014-05-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date list

10、s and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation un

11、der the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, E

12、stonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committ

13、ee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELE

14、C Members. Ref. No. EN 62841-3-6:2014 E BS EN 62841-3-6:2014EN 62841-3-6:2014 - 2 - Foreword The text of document 116/165/FDIS, future edition 1 of IEC 62841-3-6, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC a

15、s EN 62841-3-6:2014. A draft amendment, which covers common modifications to IEC 62841-3-6:2014, was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which this document has to be implemented at national level by

16、publication of an identical national standard or by endorsement (dop) 2015-05-02 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-05-02 EN 62841-3-6:2014 supersedes EN 61029-2-6:2010. This document has been prepared under a mandate given to C

17、ENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Clauses, subclauses, notes, tables, figures and annexes w

18、hich are additional to those in IEC 62841-3-6 are prefixed “Z”. This European Standard is divided into four parts: Part 1: General requirements which are common to most electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of t

19、his standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 3-6 is to be used in conjunction with EN 62841-1:201X 1). When this

20、 standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101. Compliance with the clauses of Part 1 together with this Part 3-6 provides on

21、e means of conforming with the essential health and safety requirements of the Directive concerned. Warning: Other requirements and other EU Directives can be applicable to the products falling within the scope of this standard. This European Standard follows the overall requirements of EN ISO 12100

22、. NOTE In this standard the following print types are used: - requirements proper; in roman type - test specifications: in italic type; - explanatory matter: in smaller roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the assoc

23、iated noun are also in bold. 1)At draft stage. BS EN 62841-3-6:2014EN 62841-3-6:2014 - 2 - Foreword The text of document 116/165/FDIS, future edition 1 of IEC 62841-3-6, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CE

24、NELEC as EN 62841-3-6:2014. A draft amendment, which covers common modifications to IEC 62841-3-6:2014, was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which this document has to be implemented at national le

25、vel by publication of an identical national standard or by endorsement (dop) 2015-05-02 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-05-02 EN 62841-3-6:2014 supersedes EN 61029-2-6:2010. This document has been prepared under a mandate giv

26、en to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Clauses, subclauses, notes, tables, figures and an

27、nexes which are additional to those in IEC 62841-3-6 are prefixed “Z”. This European Standard is divided into four parts: Part 1: General requirements which are common to most electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the sco

28、pe of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 3-6 is to be used in conjunction with EN 62841-1:201X 1). Wh

29、en this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101. Compliance with the clauses of Part 1 together with this Part 3-6 prov

30、ides one means of conforming with the essential health and safety requirements of the Directive concerned. Warning: Other requirements and other EU Directives can be applicable to the products falling within the scope of this standard. This European Standard follows the overall requirements of EN IS

31、O 12100. NOTE In this standard the following print types are used: - requirements proper; in roman type - test specifications: in italic type; - explanatory matter: in smaller roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and th

32、e associated noun are also in bold. 1)At draft stage. BS EN 62841-3-6:2014- 3 - EN 62841-3-6:2014 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such pat

33、ent rights. BS EN 62841-3-6:2014EN 62841-3-6:2014 - 4 - COMMON MODIFICATIONS Replace the title of Annex I by the following: Annex I (normative) Measurement of noise and vibration emissions Add the following annex: Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC This

34、 European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Compliance with this standa

35、rd provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. _ BS EN 62841-3-6:2014EN 62841-3-6:2014 - 4 - COMMON MODIFICATIO

36、NS Replace the title of Annex I by the following: Annex I (normative) Measurement of noise and vibration emissions Add the following annex: Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by t

37、he European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Compliance with this standard provides one means of conformity with the specified essential requireme

38、nts of the Directives concerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. _ BS EN 62841-3-6:2014EN 62841-3-6:2014 - 4 - COMMON MODIFICATIONS Replace the title of Annex I by the following: Annex I (normative) Meas

39、urement of noise and vibration emissions Add the following annex: Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within

40、its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Compliance with this standard provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requirements and other EU

41、Directives may be applicable to the products falling within the scope of this standard. _ BS EN 62841-3-6:2014 2 IEC 62841-3-6:2014 IEC 2014 CONTENTS 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 General requirements 5 5 General conditions for the tests . 6 6 Radiation, toxicity and

42、 similar hazards . 6 7 Classification . 6 8 Marking and instructions 6 9 Protection against access to live parts . 7 10 Starting . 7 11 Input and current . 7 12 Heating 8 13 Resistance to heat and fire 8 14 Moisture resistance . 8 15 Resistance to rusting . 8 16 Overload protection of transformers a

43、nd associated circuits 8 17 Endurance . 8 18 Abnormal operation . 9 19 Mechanical hazards . 9 20 Mechanical strength 10 21 Construction 10 22 Internal wiring 11 23 Components 11 24 Supply connection and external flexible cords . 11 25 Terminals for external conductors 11 26 Provision for earthing 11

44、 27 Screws and connections 11 28 Creepage distances, clearances and distances through insulation . 11 Annexes . 14 Annex I (informative) Measurement of noise and vibration emissions . 14 Annex K (normative) Battery tools and battery packs . 16 Bibliography 17 Figure 101 Example of a diamond drill wi

45、th liquid system . 12 Figure 102 Test arrangement to check efficiency of the liquid collection device . 13 Table 4 Required performance levels . 9 Table I.101 Test conditions for noise and vibration 14 Table I.102 Concrete formulation (per cubic metre) 15 Table I.103 Depth of holes for the test . 15

46、 BS EN 62841-3-6:2014EN 62841-3-6:2014 - 4 - COMMON MODIFICATIONS Replace the title of Annex I by the following: Annex I (normative) Measurement of noise and vibration emissions Add the following annex: Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC This European S

47、tandard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Compliance with this standard provides

48、 one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. _ BS EN 62841-3-6:2014Annex I (normative) Measurement of noise and vibratio

49、n emissions IEC 62841-3-6:2014 IEC 2014 5 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY SAFETY Part 3-6: Particular requirements for transportable diamond drills with liquid system 1 Scope This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to transportable diamond drills, intended to be connected to a liquid system. Liquid system may include liquid fro