BS EN 62868-2015 Organic light emitting diode (OLED) panels for general lighting Safety requirements《普通照明用有机发光二极管 (OLED) 面板 安全要求》.pdf

1、BSI Standards PublicationOrganic light emitting diode (OLED) panels for general lighting Safety requirementsBS EN 62868:2015National forewordThis British Standard is the UK implementation of EN 62868:2015. It is identical to IEC 62868:2014.The UK participation in its preparation was entrusted by Tec

2、hnicalCommittee CPL/34, Lamps and Related Equipment, to SubcommitteeCPL/34/1, Electric lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible

3、for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82870 6ICS 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy

4、 and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62868:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62868 November 2015 ICS 29.140.99 English Version Organic light emitting diode (OLED) panels for general li

5、ghting - Safety requirements (IEC 62868:2014) Panneaux diodes lectroluminescentes organiques (OLED) destins lclairage gnral - Exigences de scurit (IEC 62868:2014) Organische Licht emittierende Dioden (OLED)-Panels fr die Allgemeinbeleuchtung - Sicherheitsanforderungen (IEC 62868:2014) This European

6、Standard was approved by CENELEC on 2014-10-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con

7、cerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC

8、member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Rep

9、ublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardizat

10、ion Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62868:2015 E

11、BS EN 62868:2015EN 62868:2015 2 European foreword The text of document 34A/1786/FDIS, future edition 1 of IEC 62868, prepared by IEC/SC 34A “Lamps“ of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62868:2015. The following dates

12、are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-05-06 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-10-30 Attention is drawn

13、to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the Europ

14、ean Free Trade Association. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 62868:2014 was approved by CENELEC as a European

15、Standard without any modification. BS EN 62868:2015EN 62868:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable fo

16、r its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/H

17、D applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050 series International electrotechnical vocabulary - Chapter 00: General index - - IEC 60068-2-6 2007 Environmen

18、tal testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 2008 IEC 60598-1 - Luminaires - Part 1: General requirements and tests EN 60598-1 - IEC/TR 62854 2014 Sharp edge testing apparatus and test procedure for lighting equipment Tests for sharpness of edge ISO 4046-4 2002 Paper,

19、 board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products - - BS EN 62868:2015 2 IEC 62868:2014 IEC 2014 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 General . 6 4.1 General requirements . 6 4.2 General test requireme

20、nts . 7 5 Marking . 7 5.1 Contents and location . 7 5.2 Durability and legibility of marking . 7 6 Construction 8 6.1 General . 8 6.2 Mechanical strength 8 6.3 Internal short circuit 8 6.4 Wireways 9 6.5 Resistance to dust, solid objects and moisture 9 7 Mechanical hazard 9 8 Fault conditions . 9 9

21、Insulation resistance and electric strength . 10 9.1 Insulation resistance . 10 9.2 Electric strength 10 10 Thermal stress . 10 11 Creepage distances and clearances 10 12 Resistance to heat and fire 10 12.1 Resistance to heat 10 12.2 Resistance to fire 10 13 Photobiological safety 11 14 Terminals 11

22、 15 Information for luminaire design . 11 Annex A (informative) Construction of OLED panels . 12 Annex B (informative) Information for luminaire design . 14 Annex C (normative) Method of provoking internal short circuit . 15 C.1 Method for an OLED panel with glass substrates 15 C.2 Method for an OLE

23、D panel with flexible plastic substrates 15 C.3 Other methods 15 Annex D (informative) Overview of the OLED lighting system consisting of OLED panel or module 16 Figure A.1 Schematic diagram of OLED tile for lighting 12 Figure A.2 Schematic diagram of OLED panel (Example 1) for lighting 12 Figure A.

24、3 Schematic diagram of OLED panel (Example 2) for lighting 13 Figure A.4 Schematic diagram of OLED panel (Example 3) for lighting 13 Figure D.1 Schematic diagram of OLED lighting system consisting of OLED panel or module . 16 Table 1 Contents and location of marking 7 BS EN 62868:2015IEC 62868:2014

25、IEC 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ORGANIC LIGHT EMITTING DIODE (OLED) PANELS FOR GENERAL LIGHTING SAFETY REQUIREMENTS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committe

26、es (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Re

27、ports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and

28、 non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreement

29、s of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and a

30、re accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote int

31、ernational uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

32、 the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All us

33、ers should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or ot

34、her damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication.

35、 Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such pate

36、nt rights. International Standard IEC 62868 has been prepared by subcommittee SC 34A: Lamps, of IEC technical committee 34: Lamps and related equipment. The text of this standard is based on the following documents: FDIS Report on voting 34A/1786FDIS 34A/1806/RVD Full information on the voting for t

37、he approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 62868:2015 4 IEC 62868:2014 IEC 2014 In this standard, the following print types are used: requirements: roman ty

38、pe, test specifications: italic type, notes: smaller roman type. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, t

39、he publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore

40、print this document using a colour printer. BS EN 62868:2015IEC 62868:2014 IEC 2014 5 ORGANIC LIGHT EMITTING DIODE (OLED) PANELS FOR GENERAL LIGHTING SAFETY REQUIREMENTS 1 Scope This International Standard specifies the safety requirements of OLED tiles and panels for use on d.c. supplies up to 120

41、V or a.c. supplies up to 50 V at 50 Hz or 60 Hz for indoor and similar general lighting purpose. NOTE 1 At this moment only test methods for d.c. operated OLED panels are provided. Provisions for a.c. operated OLED panels are under consideration. NOTE 2 The construction of OLED tiles and panels is i

42、llustrated in Annex A. NOTE 3 The OLED lighting system consisting of OLED panels or modules is illustrated in Annex D. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, onl

43、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60598-1, Luminaires Part 1: General requirements and tests IEC 60050 (all parts): International electrotechnical vocabulary (available at ) IEC 60068-2-6:2007, E

44、nvironmental testing Part 2-6: Tests Test Fc: Vibration (sinusoidal) IEC TR 62854:2014, Sharp edge testing apparatus and test procedure for lighting equipment Tests for sharpness of edge ISO 4046-4:2002, Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted pr

45、oducts 3 Terms and definitions For the purpose of this document, the terms and definitions given in IEC 60050-845 and the following apply. 3.1 organic light emitting diode OLED light emitting semiconductor consisting of an electroluminescent zone made of organic compounds, situated between two elect

46、rodes Note 1 to entry: This note applies to the French language only. 3.2 OLED tile smallest functional OLED light source which cannot be separated into smaller OLED lighting elements containing at least one contact ledge with at least one positive and one negative pole for connection to the electri

47、cal power supply BS EN 62868:2015 6 IEC 62868:2014 IEC 2014 3.3 OLED panel independently operable unit OLED product containing an OLED tile and means of connection to electrical supply such as a connector, PCB (printed circuit board), passive electronic components and optionally a frame 3.4 OLED mod

48、ule assembly of one or more OLED panels and active electronic components 3.5 rated value quantity value for a characteristic of a product for specific operating conditions with the values and the conditions specified in the relevant standard, or assigned by the manufacturer or responsible vendor 3.6

49、 type test test or series of tests made on a type test sample for the purpose of checking compliance of the design of a given product with the requirements of the relevant standard 3.7 stabilization keeping an OLED panel switched on under specified electrical input to obtain stable conditions Note 1 to entry: The mentioned conditions can be photometric or electrical as specified in the relevant test clause. 3.8 stabilization time time, which the OLED panel requir