BS EN 62974-1-2017 Monitoring and measuring systems used for data collection gathering and analysis Device requirements《用于数据收集 集合和分析的监测和测量系统 设备要求》.pdf

1、Monitoring and measuring systems used for data collection, gathering and analysisPart 1: Device requirements (IEC 62974-1:2017)BS EN 62974-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62974-1 July 2017 ICS

2、 17.220.20 English Version Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements (IEC 62974-1:2017) Systmes de surveillance et de mesure utiliss pour la collecte et lanalyse de donnes - Partie 1: Exigences relatives aux dispositifs (IEC 62974

3、-1:2017) Erfassungs- und Messsysteme zur Datenerfassung, -bertragung und -Analyse - Teil 1: Anforderungen an die Gerte (IEC 62974-1:2017) This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co

4、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard

5、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the

6、 national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland

7、, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue M

8、arnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62974-1:2017 E National forewordThis British Standard is the UK implementation of EN 62974-1:2017. It is identical to IEC 62974-1:2017.The UK participati

9、on in its preparation was entrusted to Technical Committee PEL/85, Measuring equipment for electrical and electromagnetic quantities.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provis

10、ions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90646 6ICS 17.220.20; 03.100.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard wa

11、s published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 629741:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62974-1 July 2017 ICS 17.220.20 English Version Monit

12、oring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements (IEC 62974-1:2017) Systmes de surveillance et de mesure utiliss pour la collecte et lanalyse de donnes - Partie 1: Exigences relatives aux dispositifs (IEC 62974-1:2017) Erfassungs- und Messsys

13、teme zur Datenerfassung, -bertragung und -Analyse - Teil 1: Anforderungen an die Gerte (IEC 62974-1:2017) This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea

14、n Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versio

15、ns (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical commi

16、ttees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slo

17、vakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 C

18、ENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62974-1:2017 E BS EN 629741:2017EN 62974-1:2017 2 European foreword The text of document 85/587/FDIS, future edition 1 of IEC 62974-1, prepared by IEC/TC 85 “Measuring equipment for ele

19、ctrical and electromagnetic quantities“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62974-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorseme

20、nt (dop) 2018-03-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-26 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identify

21、ing any or all such patent rights. Endorsement notice The text of the International Standard IEC 62974-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standard indicated : IEC 6006

22、8-1 NOTE Harmonized as EN 60068-1. IEC 60068-2-30 NOTE Harmonized as EN 60068-2-30. IEC 60364-8-1 NOTE Harmonized as HD 60364-8-1. IEC 60950 (Series) NOTE Harmonized as EN 60950 (Series). IEC 61557-12 NOTE Harmonized as EN 61557-12. CISPR 24:2010 NOTE Harmonized as EN 55024:2010. ISO 50001 NOTE Harm

23、onized as EN ISO 50001. BS EN 629741:2017EN 62974-1:2017 2 European foreword The text of document 85/587/FDIS, future edition 1 of IEC 62974-1, prepared by IEC/TC 85 “Measuring equipment for electrical and electromagnetic quantities“ was submitted to the IEC-CENELEC parallel vote and approved by CEN

24、ELEC as EN 62974-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-26 latest date by which the national standards conflicting with the document have to be w

25、ithdrawn (dow) 2020-06-26 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62974-1:2

26、017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standard indicated : IEC 60068-1 NOTE Harmonized as EN 60068-1. IEC 60068-2-30 NOTE Harmonized as EN 60068-2-30. IEC 60364-8-1 NOTE Har

27、monized as HD 60364-8-1. IEC 60950 (Series) NOTE Harmonized as EN 60950 (Series). IEC 61557-12 NOTE Harmonized as EN 61557-12. CISPR 24:2010 NOTE Harmonized as EN 55024:2010. ISO 50001 NOTE Harmonized as EN ISO 50001. - EN 62974-1:2017 3 Annex ZA (normative) Normative references to international pub

28、lications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refere

29、nced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

30、 www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-1 - IEC 60068-2-2 - Environmental testing - Part 2-2: Tests - Test B: Dry heat EN 60068-2-2 - IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - Test N: Chang

31、e of temperature EN 60068-2-14 - IEC 60068-2-78 - Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state EN 60068-2-78 - IEC 60529 - Degrees of protection provided by enclosures (IP Code) - - IEC 60721-3-1 - Classification of environmental conditions - Part 3: Classification of

32、 groups of environmental parameters and their severities - Section 1: Storage EN 60721-3-1 - IEC 60721-3-2 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation EN 60721-3-2 - IEC 60721-3-3 - Class

33、ification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations EN 60721-3-3 - IEC 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surg

34、e immunity test EN 61000-4-5 - IEC 61000-4-8 - Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test EN 61000-4-8 - IEC 61000-4-11 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Volta

35、ge dips, short interruptions and voltage variations immunity tests EN 61000-4-11 - IEC 61010 series Safety requirements for electrical equipment for measurement, control and laboratory use EN 61010 series BS EN 629741:2017EN 62974-1:2017 4 IEC 61131-2 2003 Programmable controllers - Part 2: Equipmen

36、t requirements and tests - - IEC 61326-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements EN 61326-1 - IEC 62053-31 - Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechani

37、cal and electronic meters (two wires only) EN 62053-31 - IEC 62262 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) EN 62262 - 2 IEC 62974-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3

38、Terms and definitions 8 3.1 General definitions 9 3.2 Device definitions . 10 3.3 Definitions related to inputs and outputs . 10 4 Environmental conditions . 11 5 Ratings 11 6 Design and construction 11 6.1 General . 11 6.2 Product coding 12 6.3 General architecture of devices . 12 6.4 General data

39、processing . 13 6.5 Requirements on minimum functions embedded in devices . 13 6.6 Requirements on functions 14 6.6.1 General . 14 6.6.2 Communication connectivity features . 14 6.6.3 Management of digital and/or analogue input(s) or output(s) 15 6.6.4 Data time stamping 15 6.6.5 Management of logge

40、d data. 15 6.6.6 Management of aggregated data . 16 6.6.7 Analysis of aggregated data 16 6.6.8 Local visualisation on a Human Machine Interface . 16 6.6.9 Configuration management 16 6.7 Safety requirements 16 6.7.1 General . 16 6.7.2 Clearances and creepage distances 17 6.7.3 Accessible parts 17 6.

41、7.4 Hazardous live parts 17 6.8 EMC requirements 17 6.8.1 General . 17 6.8.2 Class 1 devices . 17 6.8.3 Class 2 devices . 17 6.9 Mechanical requirements 17 6.9.1 Product mechanical robustness . 17 6.9.2 Enclosure robustness (IK code) . 17 6.9.3 Degree of protection by enclosures (IP code) 18 6.10 Ma

42、rking . 18 6.10.1 General . 18 6.10.2 Device marking 18 6.11 Operating and installation instructions 19 6.11.1 General . 19 6.11.2 Pulse input(s)/output(s) . 19 6.11.3 Installation description . 19 BS EN 629741:2017EN 62974-1:2017 4 IEC 61131-2 2003 Programmable controllers - Part 2: Equipment requi

43、rements and tests - - IEC 61326-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements EN 61326-1 - IEC 62053-31 - Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and

44、 electronic meters (two wires only) EN 62053-31 - IEC 62262 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) EN 62262 - 2 IEC 62974-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms a

45、nd definitions 8 3.1 General definitions 9 3.2 Device definitions . 10 3.3 Definitions related to inputs and outputs . 10 4 Environmental conditions . 11 5 Ratings 11 6 Design and construction 11 6.1 General . 11 6.2 Product coding 12 6.3 General architecture of devices . 12 6.4 General data process

46、ing . 13 6.5 Requirements on minimum functions embedded in devices . 13 6.6 Requirements on functions 14 6.6.1 General . 14 6.6.2 Communication connectivity features . 14 6.6.3 Management of digital and/or analogue input(s) or output(s) 15 6.6.4 Data time stamping 15 6.6.5 Management of logged data.

47、 15 6.6.6 Management of aggregated data . 16 6.6.7 Analysis of aggregated data 16 6.6.8 Local visualisation on a Human Machine Interface . 16 6.6.9 Configuration management 16 6.7 Safety requirements 16 6.7.1 General . 16 6.7.2 Clearances and creepage distances 17 6.7.3 Accessible parts 17 6.7.4 Haz

48、ardous live parts 17 6.8 EMC requirements 17 6.8.1 General . 17 6.8.2 Class 1 devices . 17 6.8.3 Class 2 devices . 17 6.9 Mechanical requirements 17 6.9.1 Product mechanical robustness . 17 6.9.2 Enclosure robustness (IK code) . 17 6.9.3 Degree of protection by enclosures (IP code) 18 6.10 Marking .

49、 18 6.10.1 General . 18 6.10.2 Device marking 18 6.11 Operating and installation instructions 19 6.11.1 General . 19 6.11.2 Pulse input(s)/output(s) . 19 6.11.3 Installation description . 19 BS EN 629741:2017IEC 62974-1:2017 IEC 2017 3 7 Type tests . 20 7.1 Performance criteria for type tests 20 7.2 Safety tests . 21 7.3 EMC tests . 21 7.4 Climatic tests 21 7.5 Mechanical tests . 22 7.5.1 Degree of protection provide by enclosures for electrical equipment against external me