BS EN 88528-11-2004 Reciprocating internal combustion engine driven alternating current generating sets - Rotary uninterruptible power systems - Performance requirements and test m.pdf

1、BRITISH STANDARDBS EN 88528-11:2004Reciprocating internal combustion engine driven alternating current generating sets Part 11: Rotary uninterruptible power systems Performance requirements and test methodsThe European Standard EN 88528-11:2004 has the status of a British StandardICS 29.160g49g50g3g

2、38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Mon Feb 13 06:19:28 GMT 2006, Uncontrolled Copy, (c) BSIBS EN 88528-11:2004This

3、British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2005 BSI 31 October 2005ISBN 0 580 46509 8National forewordThis British Standard is the official English language version of EN 88528-11:2004. It is identical with IEC 88528-11:2004.The UK

4、 participation in its preparation was entrusted to Technical Committee PEL/2, Rotating electrical machinery, which has the responsibility to:A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement interna

5、tional or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport

6、 to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee an

7、y enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 48, an inside

8、back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Mon Feb 13 06:19:28 GMT 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 88528-11 NORM

9、E EUROPENNE EUROPISCHE NORM April 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation

10、 in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 88528-11:2004 E ICS 29.160 English version Reciprocating internal combustion engine driven alternating current generating sets Part 11: Rotary uninterruptible power systems - Performance requirements and test methods (

11、IEC 88528-11:2004) Groupes lectrognes courant alternatif entrans par moteurs alternatifs combustion interne Partie 11: Alimentations sans interruption accumulation dnergie cintique - Prescriptions de performances et mthodes dessai (CEI 88528-11:2004) Stromerzeugungsaggregate mit Hubkolben-Verbrennun

12、gsmotoren Teil 11: Dynamische, unterbrechungsfreie Stromversorgung - Leistungsanforderungen und Prfverfahren (IEC 88528-11:2004) This European Standard was approved by CENELEC on 2004-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions

13、for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three of

14、ficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical co

15、mmittees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: W

16、ang Bin, na, Mon Feb 13 06:19:28 GMT 2006, Uncontrolled Copy, (c) BSIForeword The text of document 2/1275/FDIS, future edition 1 of IEC 88528-11, prepared by IEC TC 2, Rotating machinery and ISO TC 70, Internal combustion engines, was submitted to the IEC-CENELEC parallel vote and was approved by CE

17、NELEC as EN 88528-11 on 2004-04-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-01-01 latest date by which the national standards conflicting with the EN have to be w

18、ithdrawn (dow) 2007-04-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 88528-11:2004 was approved by CENELEC as a European Standard without any modification. _ EN 88528-11:2004 2 Licensed Copy: Wang Bin, na, Mon Feb 13 06:19:28 GMT 2006, Uncontr

19、olled Copy, (c) BSI 3 - CONTENTS 1 Scope.6 2 Normative references .6 3 Terms and definitions .7 3.1 General .7 3.2 Performance of systems and components .8 3.3 Specified values 9 3.4 Input values.10 3.5 Output values11 4 Symbols and abbreviations.11 5 Selection criteria 116 General description 12 6.

20、1 Rotary UPS .12 6.2 Types of rotary UPS 126.2.1 Series connected rotary UPS.12 6.2.2 Line interactive rotary UPS 13 6.3 Parallel operation of a rotary UPS installation14 6.3.1 General .14 6.3.2 Parallel operation 14 6.3.3 Redundant operation .14 6.4 Power system changeover with rotary UPS installat

21、ions (bypass)15 6.5 Enclosure protection15 7 Modes of operation.15 7.1 Power conditioning mode 16 7.2 Independent mode.16 7.3 Bypass mode 17 7.4 Off mode .17 7.5 Transitions 17 7.5.1 Transition 1, starting the system with mains voltage present17 7.5.2 Transition 2, start-up without mains voltage (bl

22、ack start) .17 7.5.3 Transition 3, disconnect from grid187.5.4 Transition 4, connect to grid 18 7.5.5 Transition 6, transfer .18 7.5.6 Transition 7, 8, retransfer 188 Service conditions 18 8.1 Normal service conditions .18 8.2 Operation at extended ambient18 8.2.1 Ambient service temperature .18 8.2

23、.2 Ambient storage and transportation conditions 18 8.3 Engines.19 8.4 Rotating electrical machines19 8.5 Control logic19 EN 88528-11:20049 Electrical service conditions and performance 19 9.1 General all rotary UPS199.2 Performance20 Licensed Copy: Wang Bin, na, Mon Feb 13 06:19:28 GMT 2006, Uncont

24、rolled Copy, (c) BSI 4 10 Manufacturer technical declarations .21 10.1 General .21 10.2 Purchaser specification guidelines.21 10.2.1 Type of rotary UPS, additional features, and system requirements 22 10.2.2 Rotary UPS input.22 10.2.3 Load to be supplied from a rotary UPS 22 10.2.4 Rotary UPS output

25、.23 10.2.5 Battery (where applicable) .23 10.2.6 General application requirements and special service conditions.24 10.2.7 Multi-module system configurations .24 10.2.8 Electromagnetic compatibility 25 11 Testing .26 11.1 Static output voltage and frequency deviations26 11.2 Dynamic output voltage a

26、nd frequency deviations .27 11.3 Input current characteristics 27 11.4 Measurement of filter properties 27 11.4.1 From mains to output.27 11.4.2 From output to mains.29 11.5 System performance .29 11.5.1 Efficiency.29 11.5.2 Stored energy times 29 11.5.3 Multi-module rotary UPS performance .29 11.6

27、Black start test 30 11.7 Environmental tests.30 11.8 Audible noise 30 11.9 Testing30 12 Maintenance and product marking 32 12.1 Nameplate markings32 12.2 Label requirements33 12.3 Name plate marker33 12.4 Decals labelling3412.4.1 Safety instructions and documentation 34 12.5 Maintenance34 Annex A (i

28、nformative) Typical energy storage devices .35 Annex B (normative) Reference non-linear load Single-phase.39 Annex C (normative) Reference non-linear load Three-phase .41 Annex D (normative) Input mains failure Test method .42 Annex E (informative) Types of uninterruptible power systems (UPS) config

29、urations .43 Figure 1 Types of UPS systems .12 Figure 2 Typical example series connected rotary UPS12 Figure 3 Typical example of a line interactive rotary UPS.13 EN 88528-11:2004Figure 4 Parallel operation of a rotary UPS 14 Annex ZA (normative) Normative references to international publications wi

30、th their corresponding European publications .47 Licensed Copy: Wang Bin, na, Mon Feb 13 06:19:28 GMT 2006, Uncontrolled Copy, (c) BSI 5 - Figure 5 Bypass operation .15 Figure 6 Illustration of rotary UPS operation 16 Figure 7 Operating modes17 Figure 8 Surge test 28 Figure 9 Warning label.33 Figure

31、 A.1 Dual conversion direct-coupled flywheel 36 Figure A.2 Line interactive direct-coupled flywheel36 Figure A.3 Dual conversion indirect coupled flywheel36 Figure A.4 Line interactive indirect coupled flywheel .37 Figure A.5 Double fed a.c. machine .37Figure A.6 Dual conversion with battery.37 Figu

32、re A.7 Line interactive with battery 38Figure B.1 Single-phase non-linear load 39 Figure C.1 Three-phase non-linear load.41 Figure D.1 Input mains failure test method.42Figure E.1 Series connected type 1 .43Figure E.2 Series connected type 2 .44 Figure E.3 Line interactive .44 Figure E.4 Typical UPS

33、45 Figure E.5 Typical switchless dual feed UPS .46 Table 1 Compatibility levels for individual harmonic voltages in mains power.20 Table 2 Operating steady-state limit values for performance classes .20Table 3 Operating dynamic limit values for performance classes (note 1).21 Table 4 Technical data

34、sheets Manufacturers declaration .25 Table 5 Test methods for rotary UPS performance characteristics .31 EN 88528-11:2004Licensed Copy: Wang Bin, na, Mon Feb 13 06:19:28 GMT 2006, Uncontrolled Copy, (c) BSIRECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS Part 11: R

35、otary uninterruptible power systems Performance requirements and test methods 1 Scope This International Standard, which forms part of the ISO 8528 series, specifies criteria, including performance and test methods, for rotary uninterruptible power systems (UPS) arising out of a combination of mecha

36、nical and electrical rotating machines. This standard applies to power supplies primarily designed for supplying uninterrupted a.c. power to the consumer. When operated without input mains feed, the power is provided by stored energy and/or reciprocating internal combustion (RIC) engine and the outp

37、ut power is provided by one or more rotating electrical machines. This part 11 applies to a.c. power supplies primarily designed for supplying uninterruptible electrical power for stationary land and marine use, excluding supplies for aircraft, land vehicles or locomotives. It also excludes power su

38、pplies where the output power is generated by static converters. (See IEC 62040-3.) The use of a rotary UPS installation to improve the quality of a.c. power supply, to provide voltage and/or frequency conversion, and to provide peak shaving is also described. For some specific applications (for exa

39、mple, essential hospital supplies, offshore, non-stationary applications, high rise buildings, nuclear, etc.) supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be used as a basis. 2 Normative references The following referenced documents are indispensable fo

40、r the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60034-1:2003, Rotating Electrical Machines Part 1: Rating and performance IEC 60034-22:1996, Rotatin

41、g Electrical Machines Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets IEC 60417 (all parts), Graphical symbols for use on equipment. Index, survey and compilation of the single sheets IEC 60529:1989, Degrees of protection provided by enclosures (IP Co

42、de) IEC 61000, Electromagnetic compatibility (EMC) ISO 3046-1:2003, Reciprocating internal combustion engines ISO 7000, Graphical symbols for use on equipment ISO 8178-1, Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement of gaseous and particulate ex

43、haust emissions ISO 8528-1, Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance EN 88528-11:2004 6 Licensed Copy: Wang Bin, na, Mon Feb 13 06:19:28 GMT 2006, Uncontrolled Copy, (c) BSI- ISO 8528-6, Reciprocating internal co

44、mbustion engine driven alternating current generating sets Part 6: Test methods ISO 8528-9, Reciprocating internal combustion engine driven alternating current generating sets Part 9: Measurement and evaluation of mechanical vibrations ISO 8528-10, Reciprocating internal combustion engine driven alt

45、ernating current generating sets Part 10: Measurement of airborne noise by the enveloping surface method 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 General 3.1.1 generating set one or more RIC engines to produce mechanical energy and one

46、 or more generators to convert the mechanical energy into electrical energy together with components for transmitting the mechanical energy (for example, couplings, gearbox) and where applicable bearing and mounting components 3.1.2 uninterruptible power system (UPS) power system for maintaining con

47、tinuity of load power in the event of failure of the mains power 3.1.3 rotary UPS UPS where one or more electrical rotating machines provide the output voltage 3.1.4 converter set of equipment, static or rotating, to convert one type of electric current to another type, different in nature, voltage

48、and/or frequency 3.1.5 power system reactor regulated or non-regulated inductance in series with the input of some types of UPS 3.1.6 machine set any combination of one or more electrical rotating machines 3.1.7 energy storage device device to provide stored energy on failure of the normal power sup

49、ply system. This energy shall be available either during the total failure time or until the take over of a power supply by the RIC engine 3.1.8 continuity of load power availability of the power supplied to the load with voltage and frequency within steady-state and transient tolerance bands and with distortion and power interruptions within the limits specified for the load EN 88528-11:2004 7 Licensed Copy: Wang Bin, na, Mon