BS EN ISO 105-E11-1997 Textiles Tests for colour fastness Colour fastness to steaming《纺织品 色牢度试验 耐蒸汽色牢度》.pdf

1、BRITISH STANDARD BS EN ISO 105-E11:1997 Textiles Testsforcolour fastness Part E11: Colour fastness to steaming The European Standard EN ISO 105-E11:1996 has the status of British Standard ICS 59.080.01BSENISO105-E11:1997 This British Standard, having been prepared under the direction of the Sector B

2、oard for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 April 1997 BSI 11-1998 The following BSI references relate to the work on this standard: Committee reference TCI/25 Special announcement in BSI News June 1996 ISBN 0 580 27306 7 Com

3、mittees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/25, Chemical properties, upon which the following bodies were represented: Association of Consulting Scientists Association of Suppliers to the British Clothing Industry Br

4、itish Apparel and Textile Confederation British Clothing Industry Association British Measurement and Testing Association Chemical Industries Association Consumer Policy Committee of BSI Fabric Care Research Association Ltd. Home Laundering Consultative Council International Wool Secretariat Mail Or

5、der Traders Association Ministry of Defence National Wool Textile Export Corporation SATRA Footwear Technology Centre Soap and Detergent Industry Association Society of Dyers and Colourists Textile Finishers Association Participation in the detailed technical work was undertaken by the Society of Dy

6、ers and Colourists Amendments issued since publication Amd. No. Date CommentsBSENISO105-E11:1997 BSI 11-1998 i National foreword This British Standard has been prepared by Technical Committee TCI/25 and is the English language version of EN ISO 105:E11:1996 Textiles Tests for colour fastness Part E1

7、1: Colour fastness to steaming, published by the European Committee for Standardization (CEN). It is identical with ISO 105-E11:1994, published by the International Organization for Standardization (ISO). This British Standard supersedes the corresponding method in BS 1006:1990, which is withdrawn b

8、y amendment. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication

9、 referred to Corresponding British Standard BS EN ISO 105 Textiles Tests for colour fastness EN ISO 105-A01:1995 Part A01:1996 General principles of testing BSEN20105 Textiles Test for colour fastness EN 20105-A03:1994 Part A03:1995 Grey scale for assessing staining EN ISO 105-F:1985 BS 1006:1990 Me

10、thods of test for colour fastness of textiles and leather Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISO title page, foreword, the ISO title page, page ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (s

11、ee copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-E11 December 1996 ICS 59.080.10 Descriptors: See ISO document English version Textiles Tests for co

12、lour fastness Part E11: Colour fastness to steaming (ISO 105-E11:1994) Textiles Essais de solidit des teintures Partie E11: Solidit des teintures au vaporisage la pression atmosphrique (ISO 105-El1:1994) Textilien Farbechtheitsprfungen TeilE11: Farbechtheit gegen Dimpfen (ISO105-El1:1994) This Europ

13、ean Standard was approved by CEN on 1996-11-30. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concern

14、ing such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own lan

15、guage and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and

16、 United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN ISO 105-E11:1996 EENISO105-E11:1996 BSI 11-1998 -2 Foreword The text o

17、f the International Standard from Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 248 “Textile and textile products”, the secretariat of which is held by BSI. This European

18、Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 1997, and conflicting national standards shall be withdrawn at the latest by June 1997. According to the CEN/CENELEC Internal Regulations, the national stand

19、ards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text

20、 of the International Standard ISO105-E11:1994 has been approved by CEN as a European Standard without any modification. NOTENormative references to International Standards are listed in annex ZA (normative).ENISO105-E11:1996 ii Foreword ISO (the International Organization for Standardization) is a

21、worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented

22、 on that committee, International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards ado

23、pted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 105-E11 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee S

24、C 1, Tests for coloured textiles and colorants. This third edition cancels and replaces the second edition (ISO 105-E11:1987), of which it constitutes a technical revision. ISO 105 was previously published in thirteen “parts”, each designated by a letter (e.g. “Part A”), with publication dates betwe

25、en 1978 and 1985. Each part contained a series of “sections”, each designated by the respective part letter and by a two-digit serial number (e.g. “Section A01”). These sections are now being republished as separate documents, themselves designated “parts” but retaining their earlier alphanumeric de

26、signations. A complete list of these parts is given in ISO 105-A01. Descriptors: textiles, dyes, tests, water resistance tests, water vapor tests, determination, colour fastness, steam.ENISO105-E11:1996 BSI 11-1998 1 1 Scope This part of ISO 105 specifies a method for determining the resistance of t

27、he colour of textiles of all kinds and in all forms to the action of steam under atmospheric pressure. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 105. At the time of publication, the editions indi

28、cated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 105 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid Internati

29、onal Standards. ISO 105-A01:1994, Textiles Tests for colour fastness Part A01: General principles of testing. ISO 105-A03:1993, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining. ISO 105-F:1985, Textiles Tests for colour fastness Part F: Standard adjacent fabrics. 3 Prin

30、ciple A specimen of the textile in contact with specified adjacent fabrics is rolled into a cylinder and placed in the neck of a flask containing boiling water. The staining of the adjacent fabrics is assessed by comparison with the grey scale. 4 Apparatus 4.1 Glass tube, open at both ends, with 30

31、mm inside diameter, mounted in a cork stopper and fitted into the neck of a wide-neck conical flask of about 2 litres capacity. A wire ring is fixed in the cork stopper, with the loop covered with a thin fabric to catch spray. The flask contains about 0,5 litre of water, to which some small beads ar

32、e added (seeFigure 1). 4.2 Adjacent fabric, complying with the relevant sections F01 to F08 of ISO 105-F:1985, measuring40 mm 100 mm, of the same fibre as the specimen. 1) 4.3 Two cotton adjacent fabrics, complying with section F02 of ISO 105-F:1985, each measuring40mm 100 mm 1) . 4.4 Undyed scoured

33、 wool felt. 4.5 Grey scale for assessing staining, complying with ISO 105-A03. 5 Test specimen 5.1 If the textile to be tested is fabric, prepare a composite specimen measuring 40 mm 100 mm 1)by placing successively on a piece of cotton adjacent fabric (4.3) the textile to be tested, a piece of adja

34、cent fabric (4.2) and a further piece of cotton adjacent fabric (4.3). Roll this composite specimen into a cylinder, with the fabric being tested as near the middle as possible. 5.2 If the textile to be tested is yarn, knit it into fabric and use a piece 40 mm 100 mm 1) ; treat as in5.1. 5.3 If the

35、textile to be tested is loose fibre, comb and compress enough of it to form a sheet40mm 100mm 1) , and place it on a piece of cotton adjacent fabric (4.3); place successively on this a piece of adjacent fabric (4.2) and a further piece of cotton adjacent fabric (4.3). Roll the composite specimen int

36、o a cylinder, with the fibre to be tested as near the middle as possible. 6 Procedure 6.1 Bring the water in the conical flask (see 4.1) to the boil. Wrap the cylindrical composite specimen in felt (4.4) so that the whole fits snugly into the glass tube (4.1) in the neck of the flask and is retained

37、 by protuberances in the lower part of the tube. Steam for 30 min. 6.2 Remove the composite specimen from the tube, separate the components and dry by hanging in air at a temperature not exceeding 60 C. 6.3 Assess the staining of the adjacent fabrics by comparison with the grey scale (4.5). 7 Test r

38、eport The test report shall include the following information: a) the number and year of publication of this part of ISO 105, i.e. ISO 105-E11:1994; b) all details necessary for the identification of the sample tested; c) the numerical grey scale rating for staining of the adjacent fabrics. 1) The l

39、ength of 100 mm may be reduced if the fabric to be tested is too thick for the cylinder to be inserted into the tube. To facilitate rolling, stitch the composite specimen at one end.ENISO105-E11:1996 2 BSI 11-1998 Figure 1 Apparatus for determining colour fastness to steaming under atmospheric press

40、ureENISO105-E11:1996 BSI 11-1998 3 Annex ZA (normative) Normative references to international publications with their relevant European publications This European Standard. incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the app

41、ropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publ

42、ication referred to applies. Publication Year Title EN Year ISO 105-A01 1994 Textiles Tests for colour fastness PartA01:General principles of testing EN ISO 105-A01 1995 ISO 105-A03 1993 Textiles Tests for colour fastness PartA03:Grey scale for assessing staining EN 20105-A03 19944 blankBSENISO105-E

43、11:1997 BSI 11-1998 List of references See national foreword.BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

44、| | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions Br

45、itish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity

46、while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers auto

47、matically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply th

48、e BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI el

49、ectronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyri