BS EN ISO 105-N03-1995 Textiles Tests for colour fastness Colour fastness to bleaching Sodium chlorite (mild)《纺织品 色牢度试验 第N03部分 耐漂白色牢度 亚氯酸钠（中度）》.pdf

1、BRITISH STANDARD BS EN ISO 105-N03:1995 Textiles Tests for colour fastness Part N03: Colour fastness to bleaching Sodium chlorite (mild) The European Standard ENISO105-N03:1995 has the status of a British StandardBSEN ISO 105-N03:1995 This British Standard, having been prepared under the directionof

2、 the Sector Board forMaterials and Chemicals, waspublished under the authorityof the Standards Boardand comes into effect on 15June1995 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference TCI/25 Special announcement in BSINews, August 1994 ISBN 0 580 237

3、55 9 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/25, Chemical properties, upon which the following bodies were represented: Association of Consulting Scientists Association of Suppliers to the British Clothing Ind

4、ustry British Retail Consortium British Textile Confederation Chemical Industries Association Home Laundering Consultative Council International Wool Secretariat Mail Order Traders Association Ministry of Defence National Wool Textile Export Corporation SATRA Footwear Technology Centre Soap and Dete

5、rgent Industry Association Society of Dyers and Colourists Textile Finishers Association Textile Research Council (FCRA) Participation in the detailed technical work was undertaken by the Society of Dyers and Colourists. Amendments issued since publication Amd. No. Date CommentsBSEN ISO 105-N03:1995

6、 BSI 10-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 1 Scope 3 2 Normative references 3 3 Principle 3 4 Apparatus and reagents 3 5 Test specimen 3 6 Procedure 3 7 Test report 4 Annex ZA (normative) Normative references to international publications w

7、ith their relevant European publications 5 List of references Inside back coverBSEN ISO 105-N03:1995 ii BSI 10-1999 National foreword This British Standard has been prepared by Technical Committee TCI/25 and is the English language version of ENISO105-N03:1995 Textiles Tests for colour fastness Part

8、 N03: Colour fastness to bleaching Sodium chlorite (mild), published by the European Committee for Standardization (CEN), which is identical with ISO105-N03:1993, published by the International Organization for Standardization (ISO). This British Standard supersedes the corresponding method in BS100

9、6:1990, which is withdrawn by amendment. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.

10、Cross-references Publication referred to Corresponding British Standard BS EN 20105 Textiles Tests for colour fastness ISO 105-A01:1989 Part A01:1993 General principles of testing ISO 105-A02:1993 Part A02:1993 Grey scale for assessing change in colour ISO 105-A03:1993 Part A03:1993 Grey scale for a

11、ssessing staining ISO 105-F:1985 BS 1006:1990 Methods of test for colour fastness of textiles and leather (Section F) ISO 105-F10:1989 BS 1006:1990 Methods of test for colour fastness of textiles and leather (Section F10) Summary of pages This document comprises a front cover, an inside front cover,

12、 pages i and ii, theEN ISO title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISC

13、HE NORM EN ISO 105-N03 April 1995 ICS 59.080.10 Descriptors: Textiles, dyes, tests, determination, colour fastness, bleaching, sodium chlorite English version Textiles Tests for colour fastness Part N03: Colour fastness to bleaching Sodium chlorite (mild) (ISO105-N03:1993) Textiles Essais de solidit

14、 des teintures Partie N03: Solidit des teintures au blanchiment Chlorite de sodium (essai doux) (ISO 105-N03:1993) Textilien Farbechtheitsprfungen TeilN03: Bestimmung der Farbechtheit gegen Bleichen Natriumchlorit (leichte Beanspruchung) (ISO 105-N03:1993) This European Standard was approved by CEN

15、on1994-12-22. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be

16、 obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central

17、 Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Com

18、mittee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 Copyright reserved to all CEN members Ref. No. EN ISO 105-N03:1995 EEN ISO 105-N03:1995 BSI 10-1999 2 Foreword The text of the International Standard

19、 has been taken as a European Standard by the Technical Committee CEN/TC248, Textiles and textile products, from ISO/TC38, Textiles, of the International Organization for Standardization (ISO). This European Standard shall be given the status of a national standard, either by publication of an ident

20、ical text or by endorsement, at the latest by October1995, and conflicting national standards shall be withdrawn at the latest by October1995. According to CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, Fra

21、nce, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, UnitedKingdom. NOTENormative references to international publications are listed inAnnex ZA (normative).EN ISO 105-N03:1995 BSI 10-1999 3 1 Scope This part of ISO105 specifies a meth

22、od for determining the resistance of the colour of textiles composed of natural and regenerated cellulose, and synthetic fibres, to the action of mild bleaching with sodium chlorite as employed in textile processing. 2 Normative references The following standards contain provisions which, through re

23、ference in this text, constitute provisions of this part of ISO105. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO105 are encouraged to investigate the possibility of applying the most recent e

24、ditions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 105-A01:1989, Textiles Tests for colour fastness Part A01: General principles of testing. ISO 105-A02:1993, Textiles Tests for colour fastness Part A02: Grey scale for

25、assessing change in colour. ISO 105-A03:1993, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining. ISO 105-F:1985, Textiles Tests for colour fastness Part F: Standard adjacent fabrics. ISO 105-F10:1989, Textiles Tests for colour fastness Part F10: Specification for adjacen

26、t fabric: Multifibre. 3 Principle A specimen of the textile in contact with one or two specified adjacent fabrics is treated in a sodium chlorite solution, rinsed and dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales. 4 Apparatus

27、 and reagents 4.1 Glass container, fitted with a reflux condenser or other means of reducing evaporation of the bath, thus preventing the need to modify the bath during the test. 4.2 Sodium chlorite solution,1g/l, brought to pH3,5 with acetic acid immediately before the test. The exact concentration

28、 of the sodium chlorite solution employed is determined by titration with sodium thiosulfate solution. 4.3 Adjacent fabrics (see ISO105-A01:1989, subclause8.3). Either: 4.3.1 A multifibre adjacent fabric, complying with ISO105-F10. Or: 4.3.2 Two single-fibre adjacent fabrics, complying with the rele

29、vant sections of F01 to F08 of ISO105-F:1985, to be assessed for staining. 4.4 If required, a non-dyeable fabric (for example, polypropylene). 4.5 Grey scale for assessing change in colour, complying with ISO105-A02, and grey scale for assessing staining, complying with ISO105-A03. 5 Test specimen 5

30、.1 If the textile to be tested is fabric, a) attach a specimen measuring40mm 100mm to a piece of the multifibre adjacent fabric(4.3.1), also measuring40mm 100mm, by sewing along one of the shorter sides, with the multifibre fabric next to the face of the specimen; or b) attach a specimen measuring40

31、mm 100mm between the two single-fibre adjacent fabrics(4.3.2), also measuring40mm 100mm, by sewing along one of the shorter sides. 5.2 Where yarn or loose fibre is to be tested, take a mass of the yarn or loose fibre approximately equal to one-half of the combined mass of the adjacent fabrics and a)

32、 place it between a40mm 100mm piece of the multifibre adjacent fabric and a40mm 100mm piece of the non-dyeable fabric(4.4) and sew them along all four sides (seeISOA01:1989, subclause9.6); or b) place it between a40mm 100mm piece of each of the two specified single-fibre fabrics and sew along all fo

33、ur sides. 6 Procedure 6.1 Wet out the composite specimen in the sodium chlorite solution(4.2) and immerse it in the solution for1h without agitation, at a temperature of80 C 2 C and at a liquor ratio of50:1. 6.2 Rinse the composite specimen for10min in cold, running tap-water. Open out the composite

34、 specimen by breaking the stitching on all sides except one of the shorter sides and dry by hanging it in air at a temperature not exceeding60 C with the parts in contact only at the remaining line of stitching.EN ISO 105-N03:1995 4 BSI 10-1999 6.3 Assess the change in colour of the specimen and the

35、 staining of the adjacent fabric(s) with the grey scales(4.5). 7 Test report The test report shall include the following particulars: a) the number and date of publication of this part of ISO105, i.e.ISO105-N03:1993; b) all details necessary for the identification of the sample tested; c) the numeri

36、cal rating for the change in colour of the specimen; d) if single-fibre adjacent fabrics were used, the numerical rating for staining of each kind of adjacent fabric used; e) if a multifibre adjacent fabric was used, the type of multifibre adjacent fabric used and the staining of each type of fibre

37、in the multifibre adjacent fabric.EN ISO 105-N03:1995 BSI 10-1999 5 Annex ZA (normative) Normative references to international publications with their relevant European publications This European Standard incorporates, by dated or undated reference, provisions from other publications. These normativ

38、e references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions or any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated referenc

39、es, the latest edition of the publication referred to applies (including amendments). Publication Year Title EN Year ISO 105-A01 1989 Textiles Tests for colour fastness Part A01: General principles of testing EN 20105-A01 1992 ISO 105-A02 1993 Textiles Tests for colour fastness Part A02: Grey scale

40、for assessing change in colour EN 20105-A02 1994 ISO 105-A03 1993 Textiles Tests for colour fastness Part A03: Grey scale for assessing staining EN 20105-A03 19946 blankBSEN ISO 105-N03:1995 BSI 10-1999 List of references See national foreword.BS EN ISO 105-N03:1995 BSI 389 Chiswick High Road London

41、 W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision.

42、 Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secr

43、etary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying st

44、andards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishSt

45、andards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details

46、on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Members

47、hip Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may b

48、e reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and

49、 size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.