BS EN ISO 105-X10-1996 Textiles Tests for colour fastness Assessment of migration of textile colours into polyvinyl chloride coatings《纺织品 色牢度试验 第X10部分 纺织品颜色向聚氯乙烯涂层迁移的评定》.pdf

1、BRITISH STANDARD BS EN ISO 105-X10:1996 Textiles Tests for colour fastness Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings The European Standard EN ISO 105-X10:1995 has the status of a British Standard ICS 59.080.10BSENISO105-X10:1996 This British Standard, havi

2、ng been prepared under the directionof the Sector BoardforMaterials and Chemicals, waspublished underthe authorityof the Standards Boardand comesintoeffect on 15 February 1996 BSI 11-1999 The following BSI references relate to the work on this standard: Committee reference TCI/25 Draft announced in

3、BSI News February 1995 ISBN 0 580 23985 3 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/25, Chemical properties, upon which the following bodies were represented: Association of Consulting Scientists Association of

4、Suppliers to the British Clothing Industry British Apparel and Textile Confederation British Clothing Industry Association British Measurement and Testing Association British Retail Consortium Chemical Industries Association Consumer Policy Committee of BSI Fabric Care Research Association Ltd. Home

5、 Laundering Consultative Council International Wool Secretariat Mail Order Traders Association Ministry of Defence National Wool Textile Export Corporation SATRA Footwear Technology Centre Soap and Detergent Industry Association Society of Dyers and Colourists Textile Finishers Association Participa

6、tion in the detailed technical work was undertaken by the Society of Dyers and Colourists Amendments issued since publication Amd. No. Date CommentsBSENISO105-X10:1996 BSI 11-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 1 Scope 3 2 Normative referenc

7、es 3 3 Principle 3 4 Apparatus and reagents 3 5 Test specimen 3 6 Procedure 3 7 Test report 4 Annex ZA (normative) Normative references to international publications with their relevant European publications 5 List of references Inside back coverBSENISO105-X10:1996 ii BSI 11-1999 National foreword T

8、his British Standard has been prepared by Technical Committee TCI/25 and is the English language version of ENISO105-X10:1995 Textiles Tests for colour fastness Part X10 Assessment of migration of textile colours into polyvinyl chloride coatings, published by the European Committee for Standardizati

9、on (CEN). It was derived by CEN from ISO105-X10:1993, published by the International Organization for Standardization (ISO). This British Standard supersedes the corresponding method in BS1006:1990, which is withdrawn by amendment. A British Standard does not purport to include all the necessary pro

10、visions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding British Standard ISO 105-A01:1989 BS EN ISO 105 Textil

11、es Tests for colour fastness Part A01:1996 General principles of testing ISO 105-A03:1993 BS EN 20105 Textiles Tests for colour fastness Part A03:1995 Grey scale for assessing staining Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN ISO title page,

12、pages2to6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-X10 November 1995 ICS 5

13、9.080.10 Descriptors: Textiles, coated fabrics, polyvinyl chloride, fabrics coated with plastics, dyes, tests, determination, colour fastness English version Textiles Tests for colour fastness Part X10: Assessment of migration of textile coloursintopolyvinyl chloride coatings (ISO 105-X10:1993) Text

14、iles Essais de solidit des teintures Partie X10: Evaluation de la migration des teintures des textiles dans les enductions de polychlorure de vinyle (ISO 105-X10:1993) Textilien Farbechtheitsprfungen TeilX10: Bestimmung der Migration von Textilfarbstoffen in Polyvinylchlorid-Beschichtungen (ISO 105-

15、X10:1993) This European Standard was approved by CEN on 1995-07-28. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographica

16、l references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN me

17、mber into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sw

18、eden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all count

19、ries to CEN and its members Ref. No. EN ISO 105-X10:1995 EENISO105-X10:1995 BSI 11-1999 2 Foreword The text of the International Standard from ISO/TC38, Textiles, of the International Organization for Standardization (ISO) has been taken over as a European Standard by the Technical Committee CEN/TC2

20、48, Textiles and textile products. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May1996, and conflicting national standards shall be withdrawn at the latest by May1996. According to CEN/CENELEC

21、 Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. NOTENormative references t

22、o International Standards are listed inAnnex ZA (normative).ENISO105-X10:1995 BSI 11-1999 3 1 Scope This part of ISO105 specifies a method for determining the resistance of the colour in textile fabrics to migration into polyvinyl chloride (PVC) which contains plasticizer. 2 Normative references The

23、 following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO105. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO105 are encouraged to

24、investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 105-A01:1989, Textiles Tests for colour fastness Part A01: General principles of testing. ISO 105-A03:1993, Tex

25、tiles Tests for colour fastness Part A03: Grey scale for assessing staining. 3 Principle A specimen of a textile impregnated with plasticizer is brought into contact with a white pigmented polyvinyl chloride foil and kept under pressure at80 C. Then the specimen and excess plasticizer are removed fr

26、om the foil and the staining of the foil is assessed with the grey scale. 4 Apparatus and reagents 4.1 Testing device, consisting of a frame of stainless steel into which a weight-piece of mass5kg and base60mm 115mm is closely fitted, so that a pressure of12,5kPa can be applied to test specimens mea

27、suring40mm 100mm placed between glass or acrylic resin plates. Up to10specimens can be tested simultaneously, each one separated by a glass plate. If the weight-piece is removed during the test, the testing device shall be so constructed that the pressure of12,5kPa remains unchanged. NOTE 1Other dev

28、ices may be used, provided that the same results are obtained as with the apparatus described here. 4.2 Oven, maintained at80 C 2 C. 4.3 Graduated pipette or dropping tube, with which the plasticizer can be applied. 4.4 White pigmented polyvinyl chloride foil, of thickness0,5mm 0,1mm. If ready-for-u

29、se white pigmented polyvinyl chloride foil cannot be obtained, it may be prepared as follows: A mixture of 65 g of polyvinyl chloride powder, 2 g of stabilizer and 5 g of titanium dioxide is thoroughly stirred with35g of dioctyl phthalate. The homogenized paste is poured on to a glass plate to a thi

30、ckness of0,5mm 0,1mm and the paste left for5min at170 C to gel. 4.5 Dioctyl phthalate. Other plasticizers or mixtures of plasticizers can also be used. 4.6 Petroleum ether (boiling point below80 C). 4.7 Grey scale for assessing staining, complying with ISO105-A03:1993. 5 Test specimen 5.1 Use a spec

31、imen of fabric measuring40mm 100mm. 5.2 Cut out a piece of the white pigmented polyvinyl chloride foil (4.4) measuring40mm 100mm. 6 Procedure 6.1 Clean the piece of white PVC foil by wiping with an undyed cloth impregnated with petroleum ether(4.6) and place it on the glass plate of the test apparat

32、us(4.1). Then place the specimen on the foil with the side of the fabric to be tested facing the foil and apply uniformly drop by drop an amount of plasticizer(4.5) equal to the mass of the specimen. (In the case of heavy fabrics, care shall be taken that the plasticizer is distributed uniformly on

33、the specimen.) Then cover the composite specimen with another glass plate and subject it to a pressure of12,5kPa in the test apparatus. If a weight is used, it shall be preheated to the test temperature. If the dimensions of the composite specimen differ from40mm 100mm, use a weightpiece such that a

34、 pressure of12,5kPa is applied to the specimen. 6.2 Place the test apparatus containing the specimen in the oven (4.2) for3,5h at80 C 2 C. 6.3 Remove the specimen from the PVC foil. Rinse the foil on the glass plate with petroleum ether and allow the latter to evaporate at room temperature. CAUTION

35、Petroleum ether is flammable. 6.4 Immediately after drying, assess the staining of the polyvinyl chloride foil by means of the grey scale(4.7).ENISO105-X10:1995 4 BSI 11-1999 7 Test report The test report shall include the following particulars: a) the number and date of publication of this part of

36、ISO105 (i.e.ISO105-X10:1993); b) all details necessary for the identification of the sample tested; c) the type of plasticizer used; d) the numerical rating for the staining of the white pigmented polyvinyl chloride foil.ENISO105-X10:1995 BSI 11-1999 5 Annex ZA (normative) Normative references to in

37、ternational publications with their relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated re

38、ferences, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. Publication Year Title EN Year ISO 105-A01 1994 Textil

39、es Tests for colour fastness Part A01: General principles of testing EN ISO 105-A01 1994 ISO 105-A03 1993 Textiles Tests for colour fastness Part A03: Grey scale for assessing staining EN 20105-A03 19946 blankBSENISO105-X10:1996 BSI 11-1999 List of references See national foreword.BS EN ISO 105-X10:

40、1996 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards

41、 are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this

42、 BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the l

43、atest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those

44、 that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services

45、are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of th

46、ese and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs

47、 and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of

48、necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.