1、BRITISH STANDARD BS EN ISO 105-Z01:1996 Textiles Tests for colour fastness Part Z01: Colour fastness to metals in the dye-bath: Chromium salts The European Standard ENISO105-Z01:1996 has the status of a British Standard ICS 59.080.10BSEN ISO 105-Z01:1996 This British Standard, having been prepared u
2、nder the directionof the Sector Board forMaterials and Chemicals, waspublished under the authorityof the Standards Boardand comes into effect on 15February1996 BSI 11-1999 The following BSI references relate to the work on this standard: Committee reference TCI/25 Draft announced in BSI News Februar
3、y 1995 ISBN 0 580 23987 X Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/25, Chemical properties, upon which the following bodies were represented: Association of Consulting Scientists Association of Suppliers to the
4、 British Clothing Industry British Apparel and Textile Confederation British Clothing Industry Association British Measurement and Testing Association British Retail Consortium Chemical Industries Association Consumer Policy Committee of BSI Fabric Care Research Association Ltd. Home Laundering Cons
5、ultative Council International Wool Secretariat Mail Order Traders Association Ministry of Defence National Wool Textile Export Corporation SATRA Footwear Technology Centre Soap and Detergent Industry Association Society of Dyers and Colourists Textile Finishers Association Participation in the deta
6、iled technical work was undertaken by the Society of Dyers and Colourists Amendments issued since publication Amd. No. Date CommentsBSEN ISO 105-Z01:1996 BSI 11-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 1 Scope 3 2 Normative references 3 3 Princip
7、le 3 4 Apparatus and reagents 3 5 Test specimens 3 6 Procedure 3 7 Test report 3 Annex ZA (normative) Normative references to international publications with their relevant European publications 4 List of references Inside back coverBSEN ISO 105-Z01:1996 ii BSI 11-1999 National foreword This British
8、 Standard has been prepared by Technical CommitteeTCI/25 and is the English language version of ENISO105-Z01:1995 Textiles Tests for colour fastness PartZ01: Colour fastness to metals in the dye-bath: Chromium salts, published by the European Committee for Standardization (CEN). It was derived by CE
9、N from ISO105-Z01:1993, published by the International Organization for Standardization (ISO). This British Standard supersedes the corresponding method inBS1006:1990, which is withdrawn by amendment. A British Standard does not purport to include all the necessary provisions of a contract. Users of
10、 British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding British Standard ISO 105-A01:1989 BSENISO105 Textiles Tests for colour fastness PartA
11、01:1996 General principles of testing ISO 105-A02:1993 BS EN 20105 Textiles Tests for colour fastness Part A02:1995 Grey scale for assessing change in colour Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISO title page, pages 2 to 4, an inside b
12、ack cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-Z01 November 1995 ICS 59.080.10 Descriptors:
13、Textiles, wool, dyeing, colour fastness, dyes, tests English version Textiles Tests for colour fastness PartZ01: Colour fastness to metals in the dye-bath: Chromium salts (ISO105-Z01:1993) Textiles Essais de solidit des teintures PartieZ01: Solidit des teintures aux mtaux dans les bains de teinture:
14、 Sels de chrome (ISO105-Z01:1993) Textilien Farbechtheitsprfungen TeilZ01: Farbechtheit gegenber Metallen im Frbebad: Chrom-Saize (ISO105-Z01:1993) This European Standard was approved by CEN on 1995-07-28. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
15、conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in t
16、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of
17、Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat
18、: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members Ref. No. ENISO105-Z01:1995 EEN ISO 105-Z01:1995 BSI 11-1999 2 Foreword The text of the International Standard from ISO/TC38, Textiles,
19、 of the International Organization for Standardization (ISO) has been taken over as a European Standard by the Technical Committee CEN/TC248, Textiles and textile products. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endor
20、sement, at the latest by May1996, and conflicting national standards shall be withdrawn at the latest by May1996. According to CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland
21、, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. NOTENormative references to International Standards are listed inAnnex ZA (normative).EN ISO 105-Z01:1995 BSI 11-1999 3 1 Scope This part of ISO105 specifies a method for determining the e
22、ffect, on the colour of a dye, of dyeing in the presence of hexavalent chromium salts. It is applicable to wool. An alternative method is specified in6.3 to provide a milder test suitable for assessing the effect of chromium salts in such concentrations as might be found when shading. 2 Normative re
23、ferences The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO105. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO105 are en
24、couraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 105-A01:1989, Textiles Tests for colour fastness PartA01: General principles of testing. ISO 105-A0
25、2:1993, Textiles Tests for colour fastness PartA02: Grey scale for assessing change in colour. 3 Principle The difference in colour between dyeings made with and without potassium dichromate is assessed with the grey scale. 4 Apparatus and reagents 4.1 Two pieces of undyed light wool fabric, of a si
26、ze suitable for laboratory dyeing. 4.2 Two dye-baths, and solutions usual for the dye. 4.3 Potassium dichromate (K 2 Cr 2 O 7 ),10g/l solution. 4.4 Grey scale for assessing change in colour, complying with ISO105-A02. 5 Test specimens See4.1. 6 Procedure 6.1 Dyeing Make two dyeings of the dye at the
27、 standard depth of colour on the wool fabric using the normal method for the dye under examination at a liquor ratio of40:1. 6.2 Method 1 On completion of the dyeing, add to one of the dye-baths sufficient potassium dichromate solution to give1% of K 2 Cr 2 O 7on the mass of the wool. Maintain both
28、baths at the boil for a further60min. 6.3 Method 2 On completion of the dyeing, add to one of the dye-baths sufficient potassium dichromate solution to give0,2% of K 2 Cr 2 O 7on the mass of the wool. Maintain both baths at the boil for a further60min. 6.4 Evaluation Compare the colour of the dyeing
29、 made in the presence of potassium dichromate with that of the dyeing made in its absence and assess the difference with the grey scale(4.4). 7 Test report The test report shall include the following particulars: a) the number and date of publication of this part of ISO105, i.e.ISO105-Z01:1993; b) t
30、he dye used; c) the method and the strength of the dyeing; d) the numerical rating for change in colour.EN ISO 105-Z01:1995 4 BSI 11-1999 Annex ZA (normative) Normative references to international publications with their relevant European publications This European Standard incorporates by dated or
31、undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only w
32、hen incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. Publication Year Title EN Year ISO 105-A01 1994 Textiles Tests for colour fastness PartA01: General principles of testing ENISO105-A01 1994 ISO 105-A02 1993 Textiles Tes
33、ts for colour fastness PartA02: Grey scalefor assessing change in colour EN 20105-A02 1994BSEN ISO 105-Z01:1996 BSI 11-1999 List of references See national foreword.BS EN ISO 105-Z01:1996 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body res
34、ponsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendm
35、ents or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be foun
36、d on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications sh
37、ould be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wi
38、de range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:020899671
39、11. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsi
40、sts in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any
41、 means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1