BS EN ISO 1346-2012 Fibre ropes Polypropylene split film monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) 3- 4- 8- and 12-strand ropes《纤维绳索 .pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1346:2012Fibre ropes Polypropylenesplit film, monofilamentand multifilament (PP2) andpolypropylene high-tenacitymultifilament (PP3) 3-, 4-,8- and 12-strand ropes (ISO13

2、46:2012)BS EN ISO 1346:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 1346:2012.It supersedes BS EN ISO 1346:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/77, Ropes and cordage and fishing nets.

3、A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI Standard

4、sLimited 2012ISBN 978 0 580 74411 2ICS 59.080.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2012.Amendments issued since publicationDate Text affecte

5、dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1346 August 2012 ICS 59.080.50 Supersedes EN ISO 1346:2004English Version Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes (ISO 1

6、346:2012) Cordages en fibres - Film fibrill, monofilament et multifilament de polypropylne (PP2) et multifilament de polypropylne haute tnacit (PP3) - Cordages 3, 4, 8 et 12 torons (ISO 1346:2012) Faserseile - Polypropylen-Splitfilm, Moofilament und Multifilament (PP2) und hochfestes Polypropylen-Mu

7、ltifilament (PP3) - 3-, 4-, 8- und 12-litzige Seile (ISO 1346:2012) This European Standard was approved by CEN on 11 August 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standa

8、rd without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any

9、 other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repub

10、lic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN

11、COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1346:2012: EBS EN ISO 1346:20

12、12EN ISO 1346:2012 (E) 3 Foreword This document (EN ISO 1346:2012) has been prepared by Technical Committee ISO/TC 38 “Textiles“ in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the sta

13、tus of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013. Attention is drawn to the possibility that some of the elements of this document may be the

14、subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 1346:2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to impleme

15、nt this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, S

16、lovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 1346:2012 has been approved by CEN as a EN ISO 1346:2012 without any modification. BS EN ISO 1346:2012ISO 1346:2012(E) ISO 2012 All rights reserved iiiContents PageForeword iv1 Scope 12 N

17、ormative references . 13 Terms and definitions . 14 Designation . 15 General requirements . 26 Physical properties .37 Marking . 7BS EN ISO 1346:2012ISO 1346:2012(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bod

18、ies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and

19、 non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, P

20、art 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies castin

21、g a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 1346 was prepared by Technical Committee ISO/TC 38, Textiles.This fourth edition cancels

22、and replaces the third edition (ISO 1346:2004), which has been technically revised.iv ISO 2012 All rights reservedBS EN ISO 1346:2012INTERNATIONAL STANDARD ISO 1346:2012(E)Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) 3

23、-, 4-, 8- and 12-strand ropes1 ScopeThis International Standard specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes, 8-strand braided ropes and 12-strand braided ropes for general service made of polypropylene, and gives rules for their designation.2 Normative referencesTh

24、e following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1968, Fibre ropes and cordage VocabularyISO 2307

25、, Fibre ropes Determination of certain physical and mechanical propertiesISO 9554, Fibre ropes General specifications3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 1968 apply.4 DesignationFibre ropes shall be designated by the words “fibre rope”, the

26、 number of this International Standard, the construction or type of rope (see Clause 5), the reference number of the rope, the material from which the rope is made: PP2: polypropylene split film, monofilament and multifilament, PP3: polypropylene high-tenacity multifilament.EXAMPLE Designation of an

27、 8-strand braided rope (type L) with a linear density of 1 630 ktex, corresponding to the reference number 60 and made of polypropylene monofilament (PP2):Fibre rope ISO 1346 L 60 PP2 ISO 2012 All rights reserved 1BS EN ISO 1346:2012ISO 1346:2012(E)5 General requirements5.1 Polypropylene ropes shall

28、 be made in one of the following constructions: type A: 3-strand hawser-laid rope (see Figure 1); type B: 4-strand shroud-laid rope (see Figure 2); type L: 8-strand braided rope (see Figure 3); type T: 12-strand braided rope (see Figure 4).Figure 1 Shape of a 3-strand hawser-laid rope (type A)Figure

29、 2 Shape of a 4-strand shroud-laid rope (type B)Figure 3 Shape of an 8-strand braided rope (type L)2 ISO 2012 All rights reservedBS EN ISO 1346:2012ISO 1346:2012(E)Figure 4 Shape of a 12-strand braided rope (type T)5.2 Construction, manufacture, lay, labelling, packaging, invoicing and delivery leng

30、ths shall in accordance with ISO 9554.6 Physical propertiesLinear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.Table 1 Linear density and minimum breaking force (MBF) of 3-strand hawser-laid polypropylene ropes, type AReference number aLinear density b cMinimum br

31、eaking force d eNominalktexTolerance%kNSplit/Mono/Multi PP2High-tenacityMulti PP3Unspliced ropesRopes with eye-spliced terminationsUnspliced ropesRopes with eye-spliced termina- tions4 7,23 2,80 2,52 3,15 2,844,5 9,15 3,55 3,20 4,00 3,605 11,3 10 4,25 3,83 4,75 4,286 16,3 6,00 5,40 6,70 6,038 28,9 1

32、0,0 9,00 11,8 10,69 36,6 12,5 11,3 14,0 12,610 45,2 15,0 13,5 17,0 15,312 65,1 8 21,2 19,1 25,0 22,514 88,6 28,0 25,2 33,5 30,216 116 37,5 33,8 42,5 38,318 146 45,0 40,5 53,0 47,820 181 56,0 50,4 63,0 56,722 219 67,0 60,3 75,0 67,524 260 80,0 72,0 90,0 81,026 306 90,0 81,0 106 95,428 354 106 95,4 11

33、8 10630 407 118 106 132 11932 463 132 119 150 13536 586 170 153 190 17140 723 5 200 180 236 21244 875 250 225 280 252 ISO 2012 All rights reserved 3BS EN ISO 1346:2012ISO 1346:2012(E)Reference number aLinear density b cMinimum breaking force d eNominalktexTolerance%kNSplit/Mono/Multi PP2High-tenacit

34、yMulti PP3Unspliced ropesRopes with eye-spliced terminationsUnspliced ropesRopes with eye-spliced termina- tions48 1 040 280 252 335 30252 1 220 335 302 375 33856 1 420 375 338 425 38360 1 630 425 383 500 45064 1 850 500 450 560 50472 2 340 600 540 710 63980 2 890 750 675 850 76588 3 500 5 900 810 1

35、 000 90096 4 170 1 060 954 1 180 1 062104 4 890 1 250 1 125 1 400 1 260112 5 670 1 400 1 260 1 600 1 440120 6 510 1 600 1 440 1 800 1 620128 7 410 1 800 1 620 2 000 1 800136 8 360 2 000 1 800 2 240 2 016144 9 370 2 240 2 016 2 500 2 250160 11 600 2 800 2 520 3 000 2 700aThe reference number correspo

36、nds to the approximate diameter, in millimetres.bThe linear density, in kilotex, corresponds to the net mass per length of rope, expressed in grams per metre or in kilograms per thousand metres.cThe linear density is under reference tension and is measured as specified in ISO 2307.dThe breaking forc

37、es quoted in this table relate to new dry and wet ropes.eA force determined by the test methods specified in ISO 2307 is not necessarily an accurate indication of the force at which that rope might break in other circumstances and situations. The type and quality of the termination rate of force app

38、lication, prior conditioning and previous force applications to the rope can significantly influence the breaking force. A rope bent around a post, capstan, pulley or sheave might break at a significantly lower force. A knot or other distortion in a rope might significantly reduce the breaking force

39、.Table 1 (continued)4 ISO 2012 All rights reservedBS EN ISO 1346:2012ISO 1346:2012(E)Table 2 Linear density and minimum breaking force (MBF) of 4-strand shroud-laid polypropylene ropes, type BReference number aLinear density b cMinimum breaking force d eNominalktexTolerance%kNSplit/Mono/Multi PP2Hig

40、h-tenacityMulti PP3Unspliced ropesRopes with eye-spliced terminationsUnspliced ropesRopes with eye-spliced termina- tions10 45,2 14,0 12,6 16,0 14,412 65,1 8 19,0 17,1 22,4 20,214 88,6 26,5 23,9 30,0 27,016 116 33,5 30,2 37,5 33,818 146 45,0 40,5 47,5 42,820 181 53,0 47,7 60,0 54,022 219 60,0 54,0 7

41、1,0 63,924 260 71,0 63,9 80,0 72,026 306 80,0 72,0 95,0 85,628 354 95,0 85,5 106 95,430 407 106 95,4 125 11332 463 125 113 140 12636 586 150 135 170 15340 723 5 180 162 212 19144 875 224 202 250 22548 1 040 250 225 300 27052 1 220 300 270 335 30256 1 420 335 302 400 36060 1 630 400 360 450 40564 1 8

42、50 450 405 500 45072 2 340 560 504 630 56780 2 890 670 603 750 67588 3 500 800 720 900 81096 4 170 950 855 1 060 954104 4 890 1 120 1 008 1 250 1 125112 5 670 1 250 1 125 1 400 1 260120 6 510 1 400 1 260 1 600 1 440128 7 410 1 600 1 440 1 800 1 620136 8 360 1 800 1 620 2 000 1 800144 9 370 2 000 1 8

43、00 2 240 2 016 ISO 2012 All rights reserved 5BS EN ISO 1346:2012ISO 1346:2012(E)Reference number aLinear density b cMinimum breaking force d eNominalktexTolerance%kNSplit/Mono/Multi PP2High-tenacityMulti PP3Unspliced ropesRopes with eye-spliced terminationsUnspliced ropesRopes with eye-spliced termi

44、na- tions160 11 600 5 2 500 2 250 2 800 2 520aThe reference number corresponds to the approximate diameter, in millimetres.bThe linear density, in kilotex, corresponds to the net mass per length of rope, expressed in grams per metre or in kilograms per thousand metres.cThe linear density is under re

45、ference tension and is measured as specified in ISO 2307.dThe breaking forces quoted in this table relate to new dry and wet ropes.eA force determined by the test methods specified in ISO 2307 is not necessarily an accurate indication of the force at which that rope might break in other circumstance

46、s and situations. The type and quality of the termination rate of force application, prior conditioning and previous force applications to the rope can significantly influence the breaking force. A rope bent around a post, capstan, pulley or sheave might break at a significantly lower force. A knot

47、or other distortion in a rope might significantly reduce the breaking force.Table 3 Linear density and minimum breaking force (MBF) of 8-strand and 12-strand braided polypropylene ropes, types L and TReference number aLinear density b cMinimum breaking force d eNominalktexTolerance%kN8 strands 12 st

48、randsUnspliced ropesRopes with eye-spliced terminationsUnspliced ropesRopes with eye-spliced terminations12 65,1 8 21,2 19,1 22,4 20,216 116 33,5 30,2 35,5 32,020 181 53 47,7 56 50,424 260 75 67,5 80 72,028 354 100 90,0 106 95,430 407 112 101 118 10632 463 132 119 140 12636 586 160 144 170 15340 723

49、 200 180 210 18944 875 236 212 250 22548 1 040 280 252 300 27052 1 220 335 302 355 32056 1 420 5 375 338 400 36060 1 630 425 383 450 40564 1 850 475 428 500 45072 2 340 600 540 630 56780 2 890 750 675 800 72088 3 500 900 810 950 85596 4 170 1 060 954 1 120 1 008Table 2 (continued)6 ISO 2012 All rights reservedBS EN ISO 1346:2012ISO 1346:2012(E)Reference number aLinear density b cMinimum breaking force d eNominalktexTolerance%kN8 strands 12 strandsUnspliced ropesRopes with eye-spliced terminationsU