BS EN ISO 1833-18-2010 Textiles Quantitative chemical analysis Mixtures of silk and wool or hair (method using sulfuric acid)《纺织品 定量化学分析 蚕丝与羊毛或其他动物毛纤维的混合物(硫酸法) 》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-18:2010Textiles Quantitativechemical analysisPart 18: Mixtures of silk and wool orhair (method using sulfuric acid) (ISO1833-18:2006)Licensed Copy: Wang Bin, ISO/E

2、XCHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontrolled Copy, (c) BSIBS EN ISO 1833-18:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO1833-18:2010. It is identical to ISO 1833-18:2006. It supersedes BS4407:1988 which will be withdrawn on publication of

3、the otherparts of the BS EN ISO 1833 series.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include a

4、ll the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 72139 7ICS 59.060.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and St

5、rategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1833-18 October 2010 ICS 59.060.01 English Version Tex

6、tiles - Quantitative chemical analysis - Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) (ISO 1833-18:2006) Textiles - Analyse chimique quantitative - Partie 18: Mlanges de soie et de laine ou poils (mthode lacide sulfurique) (ISO 1833-18:2006) Textilien - Quantitative chemis

7、che Analysen - Teil 18: Mischungen aus Seide und Wolle oder Haaren (Schwefelsure-Verfahren) (ISO 1833-18:2006) This European Standard was approved by CEN on 12 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eur

8、opean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (Engl

9、ish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria

10、, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STA

11、NDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1833-18:2010: ELicensed Copy: Wang Bin, ISO/EX

12、CHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontrolled Copy, (c) BSIBS EN ISO 1833-18:2010EN ISO 1833-18:2010 (E) 3 Foreword The text of ISO 1833-18:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) and has been taken over

13、as EN ISO 1833-18:2010 by Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and co

14、nflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According

15、 to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

16、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1833-18:2006 has been approved by CEN as a EN ISO 1833-18:2010 without any modification. Licensed Copy: Wang

17、 Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontrolled Copy, (c) BSIBS EN ISO 1833-18:2010ISO 1833-18:2006(E) ISO 2006 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The

18、work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-gover

19、nmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. Th

20、e main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote

21、. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1833-18 was prepared by Technical Committee ISO/TC 38, Textiles. This first edition of ISO 1833

22、-18 cancels and replaces Clause 17 of ISO 1833:1977. ISO 1833:1977 will be cancelled and replaced by ISO 1833-1, ISO 1833-3, ISO 1833-4, ISO 1833-5, ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9, ISO 1833-10, ISO 1833-11, ISO 1833-12, ISO 1833-13, ISO 1833-14, ISO 1833-15, ISO 1833-16, ISO 1833-17,

23、 ISO 1833-18 and ISO 1833-19. ISO 1833 consists of the following parts, under the general title Textiles Quantitative chemical analysis: Part 1: General principles of testing Part 2: Ternary fibre mixtures Part 3: Mixtures of acetate and certain other fibres (method using acetone) Part 4: Mixtures o

24、f certain protein and certain other fibres (method using hypochlorite) Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) Part 8: Mixtures of acetate and triacetate fibres (meth

25、od using acetone) Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures

26、of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2

27、011 07:58, Uncontrolled Copy, (c) BSIBS EN ISO 1833-18:2010ISO 1833-18:2006(E) iv ISO 2006 All rights reserved Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) Part 16: Mixtur

28、es of polypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) Part 19: Mixtures of cellulose fi

29、bres and asbestos (method by heating) Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) The following parts are under preparation: Part 6: Mixtures of viscose or certain types of cupro or modal or ly

30、ocell and cotton fibres (method using formic acid and zinc chloride) Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chlorate) Part 23

31、: Mixtures of polyethylene and polypropylene (method using cyclohexanone) Part 24: Mixtures of polyester and some other fibres (method using phenol and tetrachloroethane) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontrolled Copy, (c) BSIBS EN ISO 1833-18:2010INTERNAT

32、IONAL STANDARD ISO 1833-18:2006(E) ISO 2006 All rights reserved 1Textiles Quantitative chemical analysis Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) 1 Scope This part of ISO 1833 specifies a method, using sulfuric acid, to determine the percentage of silk, after removal o

33、f non-fibrous matter, in textiles made of binary mixtures of silk and wool or animal hair. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editio

34、n of the referenced document (including any amendments) applies. ISO 1833-1, Textiles Quantitative chemical analysis Part 1: General principles of testing 3 Principle The silk fibre is dissolved from a known dry mass of the mixture with 75 % (mass fraction) sulfuric acid 1). The residue is collected

35、, washed, dried and weighed; its mass, corrected if necessary, is expressed as a percentage of the dry mass of the mixture. The percentage of silk is found by the difference. 4 Reagents Use the reagents described in ISO 1833-1 together with those given in 4.1, 4.2 and 4.3. 4.1 Sulfuric acid. Prepare

36、 this reagent by adding carefully, while cooling, 700 ml of sulfuric acid ( = 1,84 g/ml) to 350 ml of distilled water. After cooling this solution to room temperature, dilute it to 1 I with water. The concentration is not critical within the range 73 % to 77 % (mass fraction) sulfuric acid. 4.2 Sulf

37、uric acid, dilute solution. Slowly add 100 ml of sulfuric acid (4.1) ( = 1,84 g/ml) to 1 900 ml of distilled water. 1) Wild silk, such as tussah silk, are not completely soluble in 75 % (mass fraction) sulfuric acid. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontroll

38、ed Copy, (c) BSIBS EN ISO 1833-18:2010ISO 1833-18:2006(E) 2 ISO 2006 All rights reserved4.3 Ammonia, dilute solution. Dilute 200 ml of concentrated ammonia solution ( = 0,880 g/ml) to 1 I with water. 5 Apparatus Use the apparatus described in ISO 1833-1 together with that given in 5.1. 5.1 Conical f

39、lasks, of minimum capacity 200 ml, glass stoppered. 6 Test procedure Follow the general procedure described in ISO 1833-1, and then proceed as follows. To the specimen contained in a glass-stoppered conical flask, add 100 ml of the sulfuric acid (4.1) per gram of specimen, insert the stopper, shake

40、vigorously (preferably in a mechanical shaker) and allow to stand for 30 min at room temperature. Shake again and allow to stand for 30 min. Shake a last time and filter the contents of the flask through the weighed filter crucible. Wash any remaining fibres from the flask with a little sulfuric aci

41、d (4.1). Drain the crucible using suction and wash the residue on the crucible successively with 50 ml of the dilute sulfuric acid solution (4.2), 50 ml of water and 50 ml of the dilute ammonia solution (4.3). Each time, allow the fibres to remain in contact with the liquid for at least 10 min befor

42、e applying suction. Rinse with water, leaving the fibres in contact with the water for about 30 min. Finally, drain the crucible using suction, dry the crucible and residue, then cool and weigh them. 7 Calculation and expression of results Calculate the results as described in the general instructio

43、ns of ISO 1833-1. The value of d is 0,985. 8 Precision On a homogeneous mixture of textile materials, the confidence limits of results obtained by this method are not greater than 1 for a confidence level of 95 %. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontrolled

44、Copy, (c) BSIBS EN ISO 1833-18:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontrolled Copy, (c) BSIThis page deliberately left blankL

45、icensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:58, Uncontrolled Copy, (c) BSIBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at

46、the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dar

47、ds should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical c

48、om-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7

49、669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards,