1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-9:2010Textiles Quantitativechemical analysisPart 9: Mixtures of acetate and triacetatefibres (method using benzyl alcohol) (ISO1833-9:2006)Licensed Copy: Wang Bin,
2、 ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIBS EN ISO 1833-9:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO1833-9:2010. It is identical to ISO 1833-9:2006. It supersedes BS4407:1988 which will be withdrawn on publication
3、of the otherparts of the BS EN ISO 1833 series.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to includ
4、e all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 72130 4ICS 59.060.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and
5、 Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1833-9 October 2010 ICS 59.060.20 English Version T
6、extiles - Quantitative chemical analysis - Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) (ISO 1833-9:2006) Textiles - Analyse chimique quantitative - Partie 9: Mlanges de fibres dactate et de triactate (mthode lalcool benzylique) (ISO 1833-9:2006) Textilien - Quanti
7、tative chemische Analysen - Teil 9: Mischungen aus Acetat- und Triacetatfasern (Benzylalkohol-Verfahren) (ISO 1833-9:2006) This European Standard was approved by CEN on 12 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giv
8、ing this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official ve
9、rsions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgi
10、um, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMI
11、TTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1833-9:2010: ELicensed Copy: Wang
12、Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIBS EN ISO 1833-9:2010EN ISO 1833-9:2010 (E) 3 Foreword The text of ISO 1833-9:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) and has been tak
13、en over as EN ISO 1833-9:2010 by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011
14、, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. A
15、ccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
16、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1833-9:2006 has been approved by CEN as EN ISO 1833-9:2010 without any modification. Licensed Copy:
17、Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIBS EN ISO 1833-9:2010ISO 1833-9:2006(E) ISO 2006 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). Th
18、e work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-gov
19、ernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
20、The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vo
21、te. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1833-9 was prepared by Technical Committee ISO/TC 38, Textiles. This first edition of ISO 183
22、3-9 cancels and replaces Clause 8 of ISO 1833:1977. ISO 1833:1977 will be cancelled and replaced by ISO 1833-1, ISO 1833-3, ISO 1833-4, ISO 1833-5, ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9, ISO 1833-10, ISO 1833-11, ISO 1833-12, ISO 1833-13, ISO 1833-14, ISO 1833-15, ISO 1833-16, ISO 1833-17,
23、ISO 1833-18 and ISO 1833-19. ISO 1833 consists of the following parts, under the general title Textiles Quantitative chemical analysis: Part 1: General principles of testing Part 2: Ternary fibre mixtures Part 3: Mixtures of acetate and certain other fibres (method using acetone) Part 4: Mixtures of
24、 certain protein and certain other fibres (method using hypochlorite) Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) Part 8: Mixtures of acetate and triacetate fibres (metho
25、d using acetone) Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures o
26、f acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/20
27、11 07:35, Uncontrolled Copy, (c) BSIBS EN ISO 1833-9:2010ISO 1833-9:2006(E) iv ISO 2006 All rights reserved Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) Part 16: Mixtures
28、of polypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) Part 19: Mixtures of cellulose fibre
29、s and asbestos (method by heating) Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) The following parts are under preparation: Part 6: Mixtures of viscose or certain types of cupro or modal or lyoce
30、ll and cotton fibres (method using formic acid and zinc chloride) Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chlorate) Part 23: M
31、ixtures of polyethylene and polypropylene (method using cyclohexanone) Part 24: Mixtures of polyester and some other fibres (method using phenol and tetrachloroethane) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIBS EN ISO 1833-9:2010INTERNATIONA
32、L STANDARD ISO 1833-9:2006(E) ISO 2006 All rights reserved 1Textiles Quantitative chemical analysis Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) 1 Scope This part of ISO 1833 specifies a method, using benzyl alcohol, to determine the percentage of acetate, after re
33、moval of non-fibrous matter, in textiles made of binary mixtures of acetate and triacetate fibres. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the lates
34、t edition of the referenced document (including any amendments) applies. ISO 1833-1, Textiles Quantitative chemical analysis Part 1: General principles of testing 3 Principle The acetate fibre is dissolved out from a known dry mass of the mixture, with benzyl alcohol. The residue is collected, washe
35、d, dried and weighed; its corrected mass is expressed as a percentage of the dry mass of mixture. The percentage of acetate is found by the difference. 4 Reagents Use the reagents described in ISO 1833-1 together with those given in 4.1 and 4.2. 4.1 Benzyl alcohol. 4.2 Ethanol. Licensed Copy: Wang B
36、in, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIBS EN ISO 1833-9:2010ISO 1833-9:2006(E) 2 ISO 2006 All rights reserved5 Apparatus Use the apparatus described in ISO 1833-1 together with those given in 5.1, 5.2 and 5.3. 5.1 Conical flask, minimum capacity 200 ml, glass-s
37、toppered. 5.2 Mechanical shaker. 5.3 Heating apparatus, suitable for maintaining the temperature of the flask at (52 2) C (for example water bath with thermostat). 6 Test procedure Follow the general procedure given in ISO 1833-1, and then proceed as follows. To the specimen contained in the conical
38、 flask, add 100 ml of benzyl alcohol per gram of specimen. Insert the stopper and shake the flask vigorously on the mechanical shaker so that it plunges into the water bath, kept at a temperature of (52 2) C. Shake the flask for (20 1) min at this temperature. Filter the contents of the flask throug
39、h the weighed filter crucible. Replace the residue in the flask by means of forceps, add to the flask a fresh portion of benzyl alcohol and shake as before at a temperature of (52 2) C for (20 1) min. Filter the contents of the flask through the same weighed filter crucible and repeat the cycle a th
40、ird time with a third 100 ml portion of benzyl alcohol. Pour the liquid and the residue into the same weighed filter crucible; wash any fibres from the flask into the crucible with an extra quantity of benzyl alcohol at a temperature of (52 2) C. Drain the crucible using suction. Transfer the fibres
41、 into a flask, rinse with ethanol and, after manual shaking, decant through the same filter crucible. Repeat this rinsing operation three times. Transfer the residue into the same filter crucible. Finally, drain the crucible using suction, dry the crucible and residue, then cool and weigh them. 7 Ca
42、lculation and expression of results Calculate the results as described in the general instructions of ISO 1833-1. The value of d is 1,00. 8 Precision On a homogeneous mixture of textile materials, the confidence limits of the results obtained by this method are not greater than 1 for the confidence
43、level of 95 %. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIBS EN ISO 1833-9:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCH
44、ANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:35, Uncontrolled Copy, (c) BSIBSI is the independent national body responsible for preparing British Standardsand other standards-re
45、lated publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 89
46、96 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an in
47、accuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which
48、ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, intern
49、ational and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of i
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1