BS EN ISO 2064-2000 Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness《金属和其他无机物覆层 有关厚度测量的定义和一般要求》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN ISO 2064:2000 The E

2、uropean Standard EN ISO 2064:2000 has the status of a British Standard ICS 01.040.17; 17.040.20; 25.220.40; 25.220.99 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Metallic and other inorganic coatings Definitions and conventions concerning the measurement of thicknessThis B

3、ritish Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 July 2000 BSI 07-2000 ISBN 0 580 34331 6 BS EN ISO 2064:2000 Amendments issued since publication Amd

4、. No. Date Comments National foreword This British Standard is the official English language version of EN ISO 2064:2000. It is identical with ISO 2064:1996. It supersedes BS EN ISO 2064:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee STI/37, Met

5、hods of test for metallic and related coatings, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related interna

6、tional and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references

7、 to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Fi

8、nd” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from lega

9、l obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii and iii, a blank page, pages 1 and 2, the annex ZA page and a back cover. The BSI copyright notice displayed in this document in

10、dicates when the document was last issued.EUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO2064 March2000 ICS25.220.30,25.220.40 SupersedesENISO2064:1994 Englishversion MetallicandotherinorganiccoatingsDefinitionsand conventionsconcerningthemeasurementofthickness(ISO 2064:1996) Revtementsmtalliqu

11、esetautresrevtements inorganiquesDfinitionsetprincipesconcernantle mesuragedelpaisseur(ISO2064:1996) MetallischeundandereanorganischeSchichten DefinitionenundFestlegungen,diedieMessungder Schichtdickebetreffen(ISO2064:1996) ThisEuropeanStandardwasapprovedbyCENon24January2000. CENmembersareboundtocom

12、plywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropean

13、Standardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepub

14、lic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG CentralSecretariat:ruedeStassart,36B1050Brussels 2000CEN Allri

15、ghtsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO2064:2000EForeword ThetextoftheInternationalStandardfromTechnicalCommitteeISO/TC107“Metallicandotherinorganic coatings“oftheInternationalOrganizationforStandardization(ISO)hasbeentakenoverasanEuropean Standa

16、rdbyTechnicalCommitteeCEN/TC262“Metallicandotherinorganiccoatings“,thesecretariatof whichisheldbyBSI. ThisEuropeanStandardreplacesENISO2064:1994. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsement,atthelatestbySeptember2000,andconflictin

17、gnationalstandardsshallbe withdrawnatthelatestbySeptember2000. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxe

18、mbourg,Netherlands,Norway,Portugal, Spain,Sweden,SwitzerlandandtheUnitedKingdom. Endorsementnotice ThetextoftheInternationalStandardISO2064:1996hasbeenapprovedbyCENasaEuropeanStandard withoutanymodification. NOTE:NormativereferencestoInternationalStandardsarelistedinannexZA(normative). EN ISO 2064:2

19、000EN ISO 2064:2000EN ISO 2064:2000EN ISO 2064:2000EN ISO 2064:2000EN ISO 2064:2000EN ISO 2064:2000AnnexZ A (normative) Normativereferencestointernationalpublications withtheirrele vantEuropeanpublications ThisEuropeanStandardincorporatesbydatedorundatedre ference,provisions fromotherpublications .

20、These normativereferencesarecitedattheappropriateplacesinthetextandthepublicationsareliste dhereafter. Fordatedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothis European Standard onlywhenincorporatedinitbya mendmentorrevision.Forundatedre ferencesthelatest editionof the

21、publicationre ferredtoapplies. Publication Year Title EN Year ISO1463 1982 Metallic andoxidecoatings Measurementofcoatingthickness Microscopicalmethod ENISO1463 1994 EN ISO 2064:2000BS EN ISO 2064:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

22、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing Britis

23、h Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is th

24、e constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cov

25、er. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed t

26、o Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of

27、information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax:

28、020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsi

29、sts in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any

30、 means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.