BS EN ISO 3611-2010 Geometrical product specifications (GPS) Dimensional measuring equipment Micrometers for external measurements Design and metrological characteristics《产品几何技术规范(.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 3611:2010Geometrical productspecifications (GPS) Dimensional measuringequipment: Micrometersfor external measurements Design and metrologicalcharacteristics (ISO 3611:2

2、010)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/07/2011 07:29, Uncontrolled Copy, (c) BSIBS EN ISO 3611:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 3611:2010.It supersedes BS 870:2008, which remains current and obsolescent.BS 870:2008

3、will remain current for the foreseeable future as it canbe used as guidance to specify the metrological characteristics whencompleting the data sheet presented in Annex B of EN ISO 3611.The UK participation in its preparation was entrusted to TechnicalCommittee TDW/4/4, Technical Product Realization

4、 - Gauging andMeasurement Equipment.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 62617

5、3ICS 17.040.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHA

6、NGE CHINA STANDARDS, 14/07/2011 07:29, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 3611 November 2010 ICS 17.040.30 English Version Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements -Design and met

7、rological characteristics (ISO 3611:2010) Spcification gomtrique des produits (GPS) - quipement de mesurage dimensionnel: Micromtres dextrieur - Caractristiques de conception et caractristiques mtrologiques (ISO 3611:2010) Geometrische Produktspezifikation (GPS) - Lngenmessgerte: Bgelmessschrauben -

8、 Konstruktionsmerkmale und messtechnische Merkmale (ISO 3611:2010) This European Standard was approved by CEN on 11 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stan

9、dard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in a

10、ny other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Rep

11、ublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN D

12、E NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 3611:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/07/2

13、011 07:29, Uncontrolled Copy, (c) BSIBS EN ISO 3611:2010EN ISO 3611:2010 (E) 3 Foreword This document (EN ISO 3611:2010) has been prepared by Technical Committee ISO/TC 213 “Dimensional and geometrical product specifications and verification” in collaboration with Technical Committee CEN/TC 290 “Dim

14、ensional and geometrical product specification and verification” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national stand

15、ards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Intern

16、al Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo

17、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 3611:2010 has been approved by CEN as a EN ISO 3611:2010 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDAR

18、DS, 14/07/2011 07:29, Uncontrolled Copy, (c) BSIBS EN ISO 3611:2010ISO 3611:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Normative references1 3 Terms and definitions .1 4 Design characteristics 2 4.1 General design and nomenclature 2 4.2 Main dimension

19、s .3 4.3 Types of indicating devices .3 4.3.1 General .3 4.3.2 Analogue indicating devices4 4.3.3 Digital indicating devices, with mechanical digital display 5 4.3.4 Digital indicating devices with electronic digital display6 4.4 Protection for field use .6 4.5 Frame7 4.6 Measuring faces 7 4.7 Measu

20、ring force limiting device.7 4.8 Adjustment devices.7 4.9 Design characteristics (manufacturers specification)7 5 Metrological characteristics.8 5.1 General .8 5.2 Effect of spindle clamp .8 5.3 Maximum permissible error of indication (limited by MPE)8 5.3.1 General .8 5.3.2 Full surface contact err

21、or, J (limited by MPEJ) 8 5.3.3 Repeatability, R (limited by MPER).8 5.3.4 Partial surface contact error, E (limited by MPEE).8 5.4 Measuring forces (limited by MPL) 8 5.5 Instrument specification sheet 8 6 Proof of conformance with specifications9 7 Marking.9 Annex A (informative) Example of an err

22、or-of-indication curve 10 Annex B (informative) Example of data sheet for micrometers for external measurements11 Annex C (informative) Calibration of metrological characteristics12 Annex D (informative) Error tests13 Annex E (informative) Notes on use .15 Annex F (informative) Relation to the GPS m

23、atrix model.16 Bibliography18 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/07/2011 07:29, Uncontrolled Copy, (c) BSIBS EN ISO 3611:2010ISO 3611:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national

24、standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International

25、 organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules g

26、iven in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at leas

27、t 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 3611 was prepared by Technical Committee ISO/TC 213,

28、Dimensional and geometrical product specifications and verification. This second edition cancels and replaces the first edition (ISO 3611:1978), which has been technically revised. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/07/2011 07:29, Uncontrolled Copy, (c) BSIBS EN ISO 3611:2010I

29、SO 3611:2010(E) ISO 2010 All rights reserved vIntroduction This International Standard is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO/TR 14638). It influences the chain link 5 of the chain of standards on size in the general GPS matrix.

30、 For more detailed information on the relation between this International Standard, other standards and the GPS matrix model, see Annex F. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/07/2011 07:29, Uncontrolled Copy, (c) BSIBS EN ISO 3611:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA

31、 STANDARDS, 14/07/2011 07:29, Uncontrolled Copy, (c) BSIBS EN ISO 3611:2010INTERNATIONAL STANDARD ISO 3611:2010(E) ISO 2010 All rights reserved 1Geometrical product specifications (GPS) Dimensional measuring equipment: Micrometers for external measurements Design and metrological characteristics 1 S

32、cope This International Standard specifies the most important design and metrological characteristics of micrometers for external measurements: with analogue indication; with digital indication: mechanical or electronic digital display. 2 Normative references The following referenced documents are i

33、ndispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 14253-1, Geometrical Product Specifications (GPS) Inspection by measurement of workpi

34、eces and measuring equipment Part 1: Decision rules for proving conformance or non-conformance with specifications ISO 14253-2, Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guidance for the estimation of uncertainty in GPS measureme

35、nt, in calibration of measuring equipment and in product verification ISO 14978:2006, Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment IEC 60529, Degrees of protection provided by enclosures (IP Code) ISO/IEC Guide 98-3, Uncertainty of measuremen

36、t Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) ISO/IEC Guide 99, International vocabulary of metrology Basic and general concepts and associated terms (VIM) 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 14978, ISO/IEC Gu

37、ide 99 and the following apply. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/07/2011 07:29, Uncontrolled Copy, (c) BSIBS EN ISO 3611:2010ISO 3611:2010(E) 2 ISO 2010 All rights reserved3.1 micrometer for external measurements measuring instrument which gives the evaluation of a dimension

38、al quantity of an external feature of a workpiece on the basis of movement of a spindle with a measuring face, moving relatively to a material measure and an anvil, with the movement generated by a screw thread NOTE 1 The guiding elements of the spindle and of the anvil are connected by a frame. NOT

39、E 2 Usually, micrometers for external measurements have a thread as a material measure with the anvil, spindle and material measure arranged in a line. 3.2 measuring face contact contact between the measuring face and a feature of a workpiece 3.2.1 full measuring face contact contact between the ful

40、l area of the measuring face and a feature of a workpiece 3.2.2 partial measuring face contact contact between a partial area of the measuring face and a feature of a workpiece 4 Design characteristics 4.1 General design and nomenclature The general design and workmanship of the micrometer for exter

41、nal measurements shall be such that its metrological characteristics comply with the requirements of this International Standard under all operational orientations, unless otherwise specified by the manufacturer. See Figure 1 for the general design. Key 1 measuring faces 7 sleeve 2 anvil 8 fiducial

42、line 3 measuring spindle 9 analogue indication 4 frame 10 thimble 5 thermally insulating plate 11 fast drive 6 spindle clamp Figure 1 Nomenclature and general design of a micrometer for external measurements Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/07/2011 07:29, Uncontrolled Copy,

43、(c) BSIBS EN ISO 3611:2010ISO 3611:2010(E) ISO 2010 All rights reserved 34.2 Main dimensions The micrometer for external measurements shall conform to the dimensions specified in Figure 2 and Table 1. Figure 2 Dimensions of a micrometer for external measurements Table 1 Dimensions of a micrometer fo

44、r external measurements Dimension Nominal value Anvil length, L1Spindle length in end position, L2Maximum dimension measurable, L3Measuring span, L425 mmcFrame depth, L5bSpindle and anvil diameter, D16,35 mm, 6,5 mm, 7,5 mm, 8 mmaNOTE The dimensions D1, L1and L2are important for the interchangeabili

45、ty of accessories mounted on the measuring faces. aAt the manufacturers discretion. Other diameters are possible. bUsually, the frame is shaped to permit the measurement of a cylinder whose diameter is equal to the last value of the measuring range. cUsually, the measuring span L4is 25 mm. Other mea

46、suring spans are possible. 4.3 Types of indicating devices 4.3.1 General Several types of indicating devices are possible: analogue indicating devices; digital indicating devices with mechanical digital display; digital indicating devices with electronic digital display. On micrometers with analogue

47、 indicating devices, the scale interval and its unit shall be labelled. On micrometers with a digital indicating device, the unit of the indication shall be labelled. NOTE Combinations of analogue and digital indicating devices are possible. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/

48、07/2011 07:29, Uncontrolled Copy, (c) BSIBS EN ISO 3611:2010ISO 3611:2010(E) 4 ISO 2010 All rights reserved4.3.2 Analogue indicating devices 4.3.2.1 General The measuring spindle should have a pitch of 0,5 mm or 1 mm. In the case of micrometers with spindles having a pitch of 0,5 mm, the 0,5 mm grad

49、uation lines on the main scale shall be clearly distinguishable from the 1 mm graduation lines by means of their arrangement above and below the fiducial line. The secondary scale on the thimble should have a scale graduated with 50 (pitch 0,5 mm) or 100 (pitch 1 mm) graduation lines, each scale interval representing 0,01 mm. For graduations of 0,001 mm, a vernier scale can be added on the sleeve. See Figures 3 to 5 for scales and arrangement of scales. 4.3.2.2 Main scale and secondary scale Key 1 main sc