BS EN ISO 4034-2012 Hexagon regular nuts (style 1) Product grade C《六角螺母(1型) 产品等级C级》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 4034:2012Hexagon regular nuts (style 1) Product grade C Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduc

2、tion or networking permitted without license from IHS-,-,-BS EN ISO 4034:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 4034:2012.It supersedes BS EN ISO 4034:2001 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCom

3、mittee FME/9, Fasteners.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. P

4、ublished by BSI StandardsLimited 2013ISBN 978 0 580 78559 7ICS 21.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2013.Amendments issued since pub

5、licationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 4034 December 2012 ICS 21.060.20 Supersedes EN

6、ISO 4034:2000English Version Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012) crous hexagonaux normaux (style 1) - Grade C (ISO 4034:2012) Sechskantmuttern - Produktklasse C (ISO 4034:2012) This European Standard was approved by CEN on 15 November 2012. CEN members are bound to compl

7、y with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

8、Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the sam

9、e status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

10、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All ri

11、ghts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 4034:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN I

12、SO 4034:2012EN ISO 4034:2012 (E) 3 Foreword This document (EN ISO 4034:2012) has been prepared by Technical Committee ISO/TC 2 “Fasteners“ in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a n

13、ational standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

14、rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 4034:2000. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European S

15、tandard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

16、 Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 4034:2012 has been approved by CEN as a EN ISO 4034:2012 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or ne

17、tworking permitted without license from IHS-,-,-BS EN ISO 4034:2012ISO 4034:2012(E) ISO 2012 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope 12 Normative references . 13 Dimensions . 14 Requirements and reference International Standards 35 Designation . 3Bibliography . 4Copyrigh

18、t European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 4034:2012ISO 4034:2012(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national

19、standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International

20、 organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules gi

21、ven in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least

22、75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 4034 was prepared by Technical Committee ISO/TC 2, Fasten

23、ers, Subcommittee SC 12, Fasteners with metric internal thread.This fourth edition cancels and replaces the third edition (ISO 4034:1999), of which it constitutes a minor revision.iv ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNo

24、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 4034:2012ISO 4034:2012(E)IntroductionThis International Standard belongs to a complete group of product standards developed by ISO on external hexagon drive fasteners. It comprises the following:a) hexagon hea

25、d bolts (ISO 4014, ISO 4015, ISO 4016 and ISO 8765);b) hexagon head screws (ISO 4017, ISO 4018 and ISO 8676);c) hexagon nuts (ISO 4032, ISO 4033, ISO 4034, ISO 4035, ISO 4036, ISO 7040, ISO 7041, ISO 7042, ISO 7719, ISO 7720, ISO 8673, ISO 8674, ISO 8675, ISO 10511, ISO 10512 and ISO 10513);d) hexag

26、on bolts with flange (ISO 4162, ISO 15071 and ISO 15072);e) hexagon nuts with flange (ISO 4161, ISO 7043, ISO 7044, ISO 10663, ISO 12125, ISO 12126 and ISO 21670). ISO 2012 All rights reserved vCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo re

27、production or networking permitted without license from IHS-,-,-BS EN ISO 4034:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 4034:2012Hexagon regular nuts (style

28、1) Product grade C1 ScopeThis International Standard specifies the characteristics of hexagon regular nuts (style 1) with threads from M5 up to and including M64 and product grade C.If, in special cases, specifications other than those listed in this International Standard are required, they can be

29、selected from existing International Standards, for example ISO 724, ISO 898-2, ISO 965-1 and ISO 4759-1.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For dated references, only the edition ci

30、ted applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensionsISO 724, ISO general-purpose metric screw threads Basic dimensionsISO 898-2, Mechanical propert

31、ies of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch threadISO 965-1, ISO general-purpose metric screw threads Tolerances Part 1: Principles and basic dataISO 3269, Fasteners Acceptance inspectionISO 4042, Fasteners Electropl

32、ated coatingsISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and CISO 8992, Fasteners General requirements for bolts, screws, studs and nutsISO 10683, Fasteners Non-electrolytically applied zinc flake coatingsISO 10684, Fasteners Hot dip galvanized coat

33、ings3 DimensionsSee Figure 1 and Tables 1 and 2.Symbols and descriptions of dimensions are specified in ISO 225.INTERNATIONAL STANDARD ISO 4034:2012(E) ISO 2012 All rights reserved 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction o

34、r networking permitted without license from IHS-,-,-BS EN ISO 4034:2012ISO 4034:2012(E)a = 15 to 30.b = 90 to 120.Figure 1Table 1 Preferred threadsDimensions in millimetresThread DM5 M6 M8 M10 M12 M16 M20Pa0,8 1 1,25 1,5 1,75 2 2,5dwmin. 6,70 8,70 11,50 14,50 16,50 22,00 27,70e min. 8,63 10,89 14,20

35、 17,59 19,85 26,17 32,95mmax. 5,60 6,40 7,90 9,50 12,20 15,90 19,00min. 4,40 4,90 6,40 8,00 10,40 14,10 16,90mwmin. 3,50 3,70 5,10 6,40 8,30 11,30 13,50snom. = max. 8,00 10,00 13,00 16,00 18,00 24,00 30,00min. 7,64 9,64 12,57 15,57 17,57 23,16 29,16Thread M24 M30 M36 M42 M48 M56 M64Pa3 3,5 4 4,5 5 5

36、,5 6dwmin. 33,30 42,80 51,10 60,00 69,50 78,70 88,20e min. 39,55 50,85 60,79 71,30 82,60 93,56 104,86mmax. 22,30 26,40 31,90 34,90 38,90 45,90 52,40min. 20,20 24,30 29,40 32,40 36,40 43,40 49,40mwmin. 16,20 19,40 23,20 25,90 29,10 34,70 39,50snom. = max. 36,00 46,00 55,00 65,00 75,00 85,00 95,00min.

37、 35,00 45,00 53,80 63,10 73,10 82,80 92,80aP is the pitch of the thread.2 ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 4034:2012ISO 4034:

38、2012(E)Table 2 Non-preferred threadsDimensions in millimetresThread DM14 M18 M22 M27 M33 M39 M45 M52 M60Pa2 2,5 2,5 3 3,5 4 4,5 5 5,5dwmin. 19,20 24,90 31,40 38,00 46,60 55,90 64,70 74,20 83,40e min. 22,78 29,56 37,29 45,20 55,37 66,44 76,95 88,25 99,21mmax. 13,90 16,90 20,20 24,70 29,50 34,30 36,90

39、 42,90 48,90min. 12,10 15,10 18,10 22,60 27,40 31,80 34,40 40,40 46,40mwmin. 9,70 12,10 14,50 18,10 21,90 25,40 27,50 32,30 37,10snom. = max. 21,00 27,00 34,00 41,00 50,00 60,00 70,00 80,00 90,00min. 20,16 26,16 33,00 40,00 49,00 58,80 68,10 78,10 87,80aP is the pitch of the thread.4 Requirements an

40、d reference International StandardsSee Table 3.Table 3 Requirements and reference International StandardsMaterial SteelGeneral requirements International Standard ISO 8992ThreadTolerance class 7HInternational Standards ISO 724, ISO 965-1Mechanical propertiesProperty classM5 M39: as agreedInternation

41、al StandardD M39: ISO 898-2D M39: as agreed (specified in ISO 898-2:2012, Annex A)ToleranceProduct grade CInternational Standard ISO 4759-1Finish CoatingAs processedRequirements for electroplating are specified in ISO 4042.Requirements for non-electrolytically applied zinc flake coatings are specifi

42、ed in ISO 10683.Requirements for hot dip galvanized coatings are specified in ISO 10684.Additional requirements or other finishes or coatings shall be agreed between the supplier and the purchaser.Acceptability Acceptance inspection is specified in ISO 3269.5 DesignationEXAMPLE A hexagon regular nut

43、 (style 1) with thread M12 and property class 5 is designated as follows:Hexagon regular nut ISO 4034 - M12 - 5 ISO 2012 All rights reserved 3Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license f

44、rom IHS-,-,-BS EN ISO 4034:2012ISO 4034:2012(E)Bibliography1 ISO 4014, Hexagon head bolts Product grades A and B2 ISO 4015, Hexagon head bolts Product grade B Reduced shank (shank diameter approximately equal to pitch diameter)3 ISO 4016, Hexagon head bolts Product grade C4 ISO 4017, Hexagon head sc

45、rews Product grades A and B5 ISO 4018, Hexagon head screws Product grade C6 ISO 4032, Hexagon regular nuts (style 1) Product grades A and B7 ISO 4033, Hexagon high nuts (style 2) Product grades A and B8 ISO 4035, Hexagon thin nuts chamfered (style 0) Product grades A and B9 ISO 4036, Hexagon thin nu

46、ts unchamfered (style 0) Product grade B10 ISO 4161, Hexagon nuts with flange, style 2 Coarse thread11 ISO 4162, Hexagon flange bolts Small series Product grade A with driving feature of product grade B12 ISO 7040, Prevailing torque type hexagon regular nuts (with non-metallic insert) Property class

47、es 5, 8 and 1013 ISO 7041, Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 1214 ISO 7042, Prevailing torque type all-metal hexagon high nuts Property classes 5, 8, 10 and 1215 ISO 7043, Prevailing torque type hexagon nuts with flange (with non-metallic

48、insert), style 2 Product grades A and B16 ISO 7044, Prevailing torque type all-metal hexagon nuts with flange, style 2 Product grades A and B17 ISO 7719, Prevailing torque type all-metal hexagon regular nuts Property classes 5, 8 and 1018 ISO 7720, Prevailing torque type all-metal hexagon nuts, style 2 Property class 919 ISO 8673, Hexagon regular nuts (style 1) with metric fine pitch thread Product grades A and B20