BS EN ISO 4263-4-2006 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for industrial gear oils《石油及其产品 抑制.pdf

1、BRITISH STANDARDBS EN ISO 4263-4:2006Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 4: Procedure for industrial gear oilsThe European Standard EN ISO 4263-4:2006 has the status of a British StandardICS 75.100g49g50g3g38g50g51g60g44g49

2、g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN ISO 4263-4:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on

3、 3 March 2006 BSI 3 March 2006ISBN 0 580 47920 XNational forewordThis British Standard is the official English language version of EN ISO 4263-4:2006. It is identical with ISO 4263-4:2006.The UK participation in its preparation was entrusted to Technical Committee PTI/13, Petroleum testing and termi

4、nology, which has the responsibility to:A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogueunder t

5、he section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicat

6、ion. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor r

7、elated international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 15and a back cover.The BSI copyright notice displ

8、ayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 4263-4February 2006ICS 75.100English VersionPetroleum and related products - Determination of the ageingbehaviour of inhibi

9、ted oils and fluids - TOST test - Part 4:Procedure for industrial gear oils (ISO 4263-4:2006)Ptrole et produits connexes - Dtermination ducomportement au vieillissement des fluides et huilesinhibs - Essai TOST - Partie 4: Mthode pour les huilespour engrenages industriels (ISO 4263-4:2006)Minerallerz

10、eugnisse und verwandte Produkte -Bestimmung des Alterungsverhaltens von inhibierten lenund Flssigkeiten - TOST-Verfahren - Teil 4: Verfahren frIndustriegetriebele (ISO 4263-4:2006)This European Standard was approved by CEN on 9 January 2006.CEN members are bound to comply with the CEN/CENELEC Intern

11、al Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.Th

12、is European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the

13、national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United K

14、ingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 4263-4:2006: EFo

15、reword This document (EN ISO 4263-4:2006) has been prepared by Technical Committee ISO/TC 28 “Petroleum products and lubricants“ in collaboration with Technical Committee CEN/TC 19 “Petroleum products, lubricants and related products“, the secretariat of which is held by NEN.This European Standard s

16、hall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at the latest by August 2006. According to the CEN/CENELEC Internal Regulations, the national standards o

17、rganizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,

18、 Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 4263-4:2006 has been approved by CEN as EN ISO 4263-4:2006 without any modifications. EN ISO 4263-4:2006Reference numberISO 4263-4:2006(E)INTERNATIONAL STANDARDISO4263-4First edition2006-02-01Petro

19、leum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 4: Procedure for industrial gear oils Ptrole et produits connexes Dtermination du comportement au vieillissement des fluides et huiles inhibs Essai TOST Partie 4: Mthode pour les huiles pour e

20、ngrenages industriels EN ISO 4263-4:2006iiiiiContents PageForeword iv1 Scope . 12 Normative references . 13 Terms and definitions. 24 Principle. 25 Reagents and materials . 26 Apparatus 37 Sampling 38 Preparation of apparatus Cleaning of glassware . 59 Procedure 510 Expression of results . 611 Preci

21、sion 612 Test report . 7Annex A (normative) Liquid-in-glass thermometer specifications . 8Annex B (normative) Method for the determination of the insoluble content (precipitation number) 9Annex C (informative) Method for the determination of the sediment content by filtration. 11Annex D (informative

22、) Method for the determination of the variation of the additives content. 12Annex E (informative) Method for the determination of the infra-red oxidation 13Bibliography . 15EN ISO 4263-4:2006ivForeword ISO (the International Organization for Standardization) is a worldwide federation of national sta

23、ndards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International or

24、ganizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules give

25、n in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 7

26、5 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 4263-4 was prepared by Technical Committee ISO/TC 28, Pe

27、troleum products and lubricants.ISO 4263 consists of the following parts, under the general title Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test: Part 1: Procedure for mineral oils Part 2: Procedure for category HFC hydraulic fluids Part 3

28、: Anhydrous procedure for synthetic hydraulic fluids Part 4: Procedure for industrial gear oils EN ISO 4263-4:20061Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 4: Procedure for industrial gear oils WARNING The use of this part of IS

29、O 4263 may involve hazardous materials, operations and equipment. This part of ISO 4263 does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this part of ISO 4263 to establish appropriate safety and health practices and determine the

30、 applicability of regulatory limitations prior to use. 1 Scope This part of ISO 4263 specifies a method for the determination of the ageing behaviour of gear oils of categories CKC, CKD, CKS and CKT as defined in ISO 6743-65. The ageing is accelerated by the presence of air and elevated temperatures

31、, and the degradation of the oil is assessed by the change in kinematic viscosity at 100 C, the insoluble content (precipitation number), and possibly the acid number increase, the sediment content by filtration, the additives content variation and the infra-red oxidation. 2 Normative references The

32、 following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2977:1997, Petroleum products and hydrocarbon so

33、lvents Determination of aniline point and mixed aniline pointISO 3104:1994, Petroleum products Transparent and opaque liquids Determination of kinematic viscosity and calculation of dynamic viscosityISO 3170:2004, Petroleum liquids Manual samplingISO 3405:2000, Petroleum products Determination of di

34、stillation characteristics at atmospheric pressureISO 3696:1987, Water for analytical laboratory use Specification and test methodsISO 3734:1997, Petroleum products Determination of water and sediment in residual fuel oils Centrifuge methodISO 12185:1996, Crude petroleum and petroleum products Deter

35、mination of density Oscillating U-tube methodEN ISO 4263-4:200623 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1insoluble content precipitation numbernumber of millilitres of precipitate formed when 10 ml of lubricating oil are mixed with 90 m

36、l of precipitation naphtha, and centrifuged under the conditions of the test 3.2sediment by filtration amount of insoluble matter, expressed in milligrams per 100 ml, retained on a filtration membrane of 1,2 mpore size after filtration under vacuum 4 Principle A test portion is reacted, in the absen

37、ce of light, in the presence of air, and at a temperature appropriate to the type of industrial gear oil under test: 95 C for CKC type; 121 C for CKD type; 150 C for CKS and CKT types. At the end of a 312 h period, the increase in kinematic viscosity at 100 C, the insoluble content (precipitation nu

38、mber), the increase in acid number (if required), the sediment content by filtration, the additives depletion and the infra-red oxidation, are determined. 5 Reagents and materials 5.1 Water, unless otherwise specified, in accordance with the requirements of grade 2 as defined in ISO 3696:1987. Potab

39、le water means tap water, unless normal piped supplies are contaminated with particulate or highly soluble mineral content. 5.2 Heptane (C7H16), of reagent grade and of minimum purity 99,75 %. 5.3 Acetone, (CH3COCH3), of general purpose reagent grade (GPR). 5.4 Air, dried, oil-free, at constant pres

40、sure. Supply from air cylinders or from a compressed air circuit is possible; this should be utilized via a regulation system to improve the consistency of the air flow. 5.5 Cleaning solutions 5.5.1 Strong oxidizing acid solution The reference strong oxidizing cleaning solution on which precision wa

41、s based, is chromosulfuric acid (see the following warning), but alternative non-chromium containing solutions, such as ammonium persulfate in concentrated sulphuric acid (8 g/l) have been found to give satisfactory cleanliness. A 10 % solution of three parts of hydrochloric acid (1 mol/l) and one p

42、art of orthophosphoric acid (concentrated GPR grade) removes iron oxide deposits. WARNING Chromosulfuric acid is a health hazard. It is toxic, a recognized carcinogen as it contains Cr(VI) compounds, highly corrosive and potentially hazardous in contact with organic materials. When using chromosulfu

43、ric acid cleaning solution, eye protection and protective clothing are essential. Never pipette the cleaning solution by mouth. After use, do not pour cleaning solution down the drain, but neutralize it with great care owing to the concentrated sulfuric acid present, and dispose of it in accordance

44、with standard procedures for toxic laboratory waste (chromium is highly dangerous to the environment). EN ISO 4263-4:20063Strongly oxidizing acid cleaning solutions that are chromium-free are also highly corrosive and potentially hazardous in contact with organic materials, but do not contain chromi

45、um which has special disposal problems. 5.5.2 Surfactant cleaning fluid A proprietary strong surfactant cleaning fluid is a preferred alternative to the strong oxidizing cleaning solution whenever the condition of the glassware permits this. 5.5.3 Laboratory detergent The detergent shall be water so

46、luble. 6 Apparatus 6.1 Oxidation cell, consisting of a large test tube of borosilicate glass, 600 mm in length, of 41 mm inside diameter, with a graduation mark to indicate a volume of 300 ml r 1 ml at 20 C, an air-delivery tube and a slotted cork stopper. The design and dimensions shall be as illus

47、trated in Figure 1. New corks should be used for each test. 6.2 Heating bath, consisting of a thermostatically controlled bath capable of maintaining the test oil portion in the oxidation cell at the specified temperature r 0,2 C. It shall be large enough to hold the required number of oxidation cel

48、ls (6.1) immersed in the heat-transfer medium so that the bath liquid is at least 50 mm above the level of the oil sample. It shall be constructed to ensure that light is excluded from the test portions during the test. If a fluid bath is used, it shall be fitted with a suitable stirring system to p

49、rovide a uniform temperature throughout the bath. If the fluid bath is fitted with a top, the total length of the oxidation cell within the bath shall be 390 mm r 10 mm. 6.3 Flowmeters, capable of measuring a flow of air of 10 l/h with an accuracy of r 0,5 l/h, one per oxidation cell is required. 6.4 Temperature-measurement devices 6.4.1 Heating bath. The temperature in liquid heating baths shall be measured by either a liquid-in-glass thermometer meeting the requirements of the specification