BS EN ISO 4619-2010 Driers for paints and varnishes《涂料和清漆用干燥剂》.pdf

1、BRITISH STANDARDDriers for paints and varnishesICS 87.060.99BS EN ISO4619:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 08:12, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN ISO 4619:2010. It is identical to ISO 4619:1998. It s

2、upersedes BS ISO 4619:1998 which is withdrawn.NOTE The ISO has a typographical error in 9.1.1.6; “ethylene diaminetetraacetatic acid (EDTA)” should read “ethylene diaminetetraacetic acid (EDTA)”.The UK participation in its preparation was entrusted by Technical Committee STI/3, Paint media and relat

3、ed products.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer im

4、munity from legal obligations.BS EN ISO 4619:2010This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 July 1998 BSI 2011Amendments/corrigenda issued since

5、publicationDate Comments 28 February 2011 This corrigendum renumbers BS ISO 4619:1998 as BS EN ISO 4619:2010ISBN 978 0 580 71384 2Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 08:12, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 4619 November

6、2010 ICS 87.060.99 English Version Driers for paints and varnishes (ISO 4619:1998) Siccatifs pour peintures et vernis (ISO 4619:1998) Trockenstoffe fr Beschichtungsstoffe (ISO 4619:1998) This European Standard was approved by CEN on 16 October 2010. CEN members are bound to comply with the CEN/CENEL

7、EC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any

8、CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. C

9、EN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

10、 Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nation

11、al Members. Ref. No. EN ISO 4619:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 08:12, Uncontrolled Copy, (c) BSIForeword The text of ISO 4619:1998 has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” of the International Organization for Standardizatio

12、n (ISO) and has been taken over as EN ISO 4619:2010 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b

13、y May 2011, and conflicting national standards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent r

14、ights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

15、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 4619:1998 has been approved by CEN as a EN ISO 4619:2010 without any modification. ii BS EN

16、ISO 4619:2010EN ISO 4619:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 08:12, Uncontrolled Copy, (c) BSI BSI 2011ContentsPageNational foreword Inside front coverForeword ii1 Scope 12 Normative references 13 Definition 14 Descriptions 15 Requirements and test methods 16 Sa

17、mpling 27 Methods of test for solid driers 28 Methods of test for liquid driers 49 Methods for determination of metal content of driers containing only one metal 510 Methods for determination of metal contents of mixed driers 1111 Test report 11Figure 1 Example of a suitable ion-exchange column 5Tab

18、le 1 Requirements and test methods 2iiiBS EN ISO 4619:2010EN ISO 4619:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 08:12, Uncontrolled Copy, (c) BSIivblankBS EN ISO 4619:2010EN ISO 4619:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/06/2011 08:12, Unco

19、ntrolled Copy, (c) BSI11 ScopeThis International Standard specifies the requirements and the corresponding test methods for driers for paints, varnishes and related products. The requirements relate to driers in the solid or liquid form.CAUTION The procedures described in this International Standard

20、 are intended to be carried out by qualified chemist or by other suitably trained and/or supervised personnel. The substances and procedures used in this method may be injurious to health if adequate precautions are not taken. This International Standard refers only to its technical suitability and

21、does not absolve the user from statutory obligations relating to health and safety.Attention is particularly drawn to the health hazards of heavy metals which may be a constituent of driers (e.g. cobalt, lead, cerium, zirconium, vanadium; see clauses 3, 4 and 8).2 Normative referencesThe following s

22、tandards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged

23、 to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.ISO 150:1980, Raw, refined and boiled linseed oil for paints and varnishes Specifications and methods of test. I

24、SO 842:1984, Raw materials for paints and varnishes Sampling. ISO 1523:1983, Paints and varnishes Determination of flashpoint Closed cup method. ISO 2431:1993, Paints and varnishes Determination of flow time by use of flow cups. ISO 2592:1973, Petroleum products Determination of flash and fire point

25、s Cleveland open cup method. ISO 2811-1:1997, Paints and varnishes Determination of density Part 1: Pyknometer method. ISO 3219:1993, Plastics Polymers/resins in the liquid state or as emulsions or dispersions Determination of viscosity using a rotational viscometer with defined shear rate. ISO 3251

26、:1993, Paints and varnishes Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes. ISO 3696:1987, Water for analytical laboratory use Specifications and test methods. ISO 4793:1980, Laboratory sintered (fritted) filters Porosity grading, classification and de

27、signation. 3 DefinitionFor the purposes of this International Standard, the following definition applies.3.1 driera compound, usually a metallic soap, that is added to products drying by oxidation in order to accelerate this process4 Descriptions4.1 Solid driersSolid driers are materials which may b

28、e manufactured in a hard, soft (highly viscous) or powder form.4.2 Liquid driersLiquid driers are materials which are supplied as solutions in organic solvents, usually white spirit.NOTE Emulsifiable driers are also available, but no requirements for this type are given in this International Standar

29、d.All these types of drier, when dissolved in solvents (normally hydrocarbons), impart specific drying properties depending on the metal used.4.3 Metals usedThe following metals are used: cobalt, manganese, lead, zinc, calcium, cerium (or other rare earths), iron, zirconium, vanadium, barium, alumin

30、ium, strontium, etc.NOTE In this International Standard, methods for determination of metal content are given only for those metals which are in common use.4.4 Acids usedThe following acids are used: fatty acids of linseed oils, tall-oil fatty acids, resinic acids, naphthenic acids, 2-ethylhexanoic

31、acid, fatty iso-acids with 9 carbon atoms, other fatty acids with 9 to 11 carbon atoms, etc.5 Requirements and test methods5.1 Driers for paints shall comply with the requirement given in Table 1. BSI 2011BS EN ISO 4619:2010EN ISO 4619:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 1

32、4/06/2011 08:12, Uncontrolled Copy, (c) BSI25.2 Driers named according to the commercial name of the main acid used shall contain at least 90 % of this acid, except for driers based on naphthenic acids, which shall contain at least 70 % of these acids, expressed as a percentage of the total mass of

33、acid present.NOTE If desired, the type and content of the acids may be determined by gas-chromatographic (GC) analysis, except in the case of naphthenic acids.6 SamplingTake a representative sample of the drier to be tested, as described in ISO 842.7 Methods of test for solid driersDuring the analys

34、is, use only reagents of recognized analytical grade and only water of at least grade 3 purity in accordance with ISO 3696.7.1 Appearance and consistencyExamine the sample visually for uniformity. If the consistency is specified, a method for its determination shall be agreed between the interested

35、parties7.2 ColourDissolve 1 part by mass of the drier in 1 part by mass of white spirit or other agreed solvent and compare the colour against an agreed sample or colour standard.Table 1 Requirements and test methodsCharacteristic Requirement Test methodSolid driers Liquid driersAppearance Clear and

36、 uniform; no suspended matter or sedimentSubclause 7.1 Subclause 8.1Consistency, if required To be agreed between the interested partiesColour As agreed between the interested partiesSubclause 7.2 Subclause 8.2Solubility (miscibility) in solvent, raw linseed oil and other drying mediaNo separation o

37、r depositSubclause 7.3 Subclause 8.3Stability of solution Clear solution; no clouding gelation or sedimentationSubclause 7.4 Subclause 8.4Suspended solid matterof liquid driers % (m/m)max. 0,1 Subclause 7.5 Subclause 7.5of solid driers As agreed between the interested partiesViscosity, only for liqu

38、id driers Subclause 8.5Volatile matter at 105 C Subclause 7.6 Subclause 7.6Flashpoint ISO 2592 ISO 1523Density To be agreed between the interested partiesISO 2811-1Acidity or basicity Subclause 7.7 Subclause 7.7Drying characteristics To be agreed between the interested partiesup to 10 % (m/m) 0,2 %a

39、Clause 9 or 10above 10 % (m/m)to 20 % (m/m) 0,3 %aMetal content (range)above 20 % (m/m)to 30 % (m/m) 0,4 %aabove 30 % (m/m) 0,5 %aa Tolerance (absolute value) on the metal content declared or agreed. BSI 2011BS EN ISO 4619:2010EN ISO 4619:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS

40、, 14/06/2011 08:12, Uncontrolled Copy, (c) BSI37.3 Solubility (miscibility) in solvents, raw linseed oil or other drying mediaSlowly heat, raising the temperature at a rate of 1 C/min, 5 g of the drier and 20 g of an agreed solvent (or drying medium) under reflux on a sand bath, with stirring, until

41、 a homogeneous solution is obtained.Allow to cool to room temperature and examine the solution for clarity, clouding and any separation or deposit.7.4 Stability of solutionAllow three portions of the solution obtained by the method specified in 7.3 to stand for 7 days in stoppered bottles, one at ea

42、ch of the following temperatures:a) 0 C;b) ambient temperature;c) 50 C.After 1 day and again after 7 days, examine the solutions for clarity, clouding sedimentation or gelation.The bottle used for the test at 50 C shall be able to withstand the pressure generated.7.5 Suspended solid matterWeigh, to

43、the nearest 0,1 g, 5 g of solid drier (or 10 g of liquid drier) into a glass flask and dissolve in (or dilute with) 100 g of white spirit or an agreed solvent. Stopper the flask allow to stand at ambient temperature for 3 days, then filter off the sediment or suspended matter using a glass filter cr

44、ucible of porosity P 16 (see ISO 4793). Wash the residue on the filter with the solvent and dry it at 105 C for 3 h. Cool to ambient temperature and weigh to the nearest 1 mg.Calculate the suspended solid matter, as a percentage by mass, using the formulawhere7.6 Volatile matterProceed according to

45、ISO 3251, taking a flat-bottomed glass of aluminium dish and a test portion of (1 0,02) g. Place the dish with the test portion in the air oven, maintained at (105 2) C. Leave it in the oven at this temperature for 3 h.7.7 Acidity or basicity7.7.1 PrincipleA solution of the drier in toluene/propan-2

46、-ol is passed through a strong acid cation exchanger and the total acid in the eluate is determined. From the total acid determined, the acid combined with the metal is subtracted.If a negative value for the acidity is obtained, the drier tested is a basic drier.The method is suitable for driers con

47、taining barium, calcium, cobalt, lead or zinc as metals, but is not applicable to driers containing cerium, iron, manganese or zirconium as metals.In such cases, the method shall be agreed between the interested parties.7.7.2 Reagents7.7.2.1 Cation exchanger: a strong-acid, ring-sulfonated polystyre

48、ne resin (for example, Merck 1, Dowex 50, Amberlite IR 120)1).7.7.2.2 Propan-2-ol7.7.2.3 Toluene7.7.2.4 Hydrochloric acid, approximately 5 % (m/m) solution.7.7.2.5 Potassium hydroxide, approximately 0,2 mol/l standard volumetric solution in 96 % (V/V) ethanol.7.7.2.6 Phenolphthalein, 1% (m/m) soluti

49、on in 96 % (V/V) ethanol.7.7.3 ApparatusOrdinary laboratory apparatus and glassware, together with the following:7.7.3.1 Suitable ion-exchange column, as shown in Figure 1, for instance.7.7.4 Preparation of the ion-exchange columnFill the ion-exchange column (7.7.3) with a quantity of the swollen ion-exchange resin (7.7.2.1) so that the height of resin in the column is about 170 mm. Pour 250 ml of the hydrochloric acid solution (7.7.2.4) gradually into the exchange column in order to change the resin into the hydrogen f