BS EN ISO 4762-2004 Hexagon socket head cap screws《内六角圆柱头螺钉》.pdf

1、BRITISH STANDARD BS EN ISO 4762:2004 Hexagon socket head cap screws The European Standard EN ISO 4762:2004 has the status of a British Standard ICS 21.060.10 BS EN ISO 4762:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 March 2004 BS

2、I 10 March 2004 ISBN 0 580 43547 4 National foreword This British Standard is the official English language version of EN ISO 4762:2004. It is identical with ISO 4762:2004. It supersedes BS EN ISO 4762:1998 which is withdrawn. The UK participation in its preparation was entrusted by Technical Commit

3、tee FME/9, Nuts, bolts and accessories, to Subcommittee FME/9/8, Hexagon socket screws, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or Europ

4、ean publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include al

5、l the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries o

6、n the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, th

7、e ISO title page, pages ii to iv, pages 1 to 11 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO4762 March2004 ICS21.060.10

8、 SupersedesENISO4762:1997 Englishversion Hexagonsocketheadcapscrews(ISO4762:2004) Visttecylindriquesixpanscreux(ISO4762:2004) ZylinderschraubenmitInnensechskant(ISO4762:2004) ThisEuropeanStandardwasapprovedbyCENon16January2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstip

9、ulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,Frenc

10、h,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Gr

11、eece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brus

12、sels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO4762:2004EINESO74:2602(40E) 2 Foreword Thisdocument(ENISO4762:2004)hasbeenpreparedbyTechnicalCommitteeISO/TC2 “Fasteners“incollaborationwithTechnicalCommitteeCEN/TC185“Threadedandnon thread

13、edmechanicalfastenersandaccessories“,thesecretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationof anidenticaltextorbyendorsement,atthelatestbySeptember2004,andconflictingnational standardsshallbewithdrawnatthelatestbySeptember2004. Thisdocument

14、supersedesENISO4762:1997. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium, Cyprus,CzechRepublic,Denmark,Estonia,Finland,France,Germany,Greece,Hungary, Iceland,Ireland,Italy,Latvia,Lithuania,

15、Luxembourg,Malta,Netherlands,Norway,Poland, Portugal,Slovakia,Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. Endorsementnotice ThetextofISO4762:2004hasbeenapprovedbyCENasENISO4762:2004withoutany modifications. ENISO4762:2004INTERNATIONAL STANDARD ISO 4762 Fourth edition 2004-03-01 Reference numb

16、er ISO 4762:2004(E) OSI 2004 Hexagon socket head cap screws Vis tte cylindrique six pans creuxENISO4762:2004ISO :2674(4002)E ii ISO 4002 All rithgs reresvde id FDPscalimer ThFDP si fam eliy ctnome niat deddebyepfa.sec In cacnadrociw eth sebodA sneciliycilop gn, thf siam elirp eb ytnide or viewb detu

17、 llahs ton tide ebed lnuet sst ehyfepcaa hcihw serdebme et desnecil era dedo tsni dnat no dellahpmoc eturep reformign ttide ehign. In odt gnidaolnwsih liferap ,tcca seitpe trehnie snopser ehtitiliby fo nto fnirA gnigniycilop gnisnecil sebod. Teh SItneC Olar Seerctraiat catpecs ibail ontily t nih.aer

18、a si Aebod t a sirramedak fo AsyS ebodtmeI snocrropta.de teDlias fo tfos ehtwcudorp erats t desutaerc ot esih FDP fb nac elif et ni dnuoG ehreneI lafnr oleative tt of eh;eli tP ehDF-rctaenoi temaraptpo erew sremizif deorp rinti.gn Evrey t neeb sah eracakt neo rusnee ttah tf ehtius si elibaf elosu re

19、 by ISO memdob rebsei. In eht kilnuyle evtne ttah a borplme rtaleit gno it si f,dnuo esaelp ifnrom thtneC erla ceSrteraita ta teh sserdda vigoleb new. IOS 4002 Alr lithgs reresv.de sselnU toesiwreh sficep,dei rap ont fo thbup silitaciam nocudorper eb yde or tuilidez na nif yorm ro by nam ysnae, tcel

20、erm ro cinocinahcela, tohp gnidulcnicopom dna gniyicrfomli, tiwuoht repsimsi noin wrtif gnirtie mohI reSO ta the asserdd ebwol or ISOmem sreb obyd t nitnuoc ehry fo teh euqertsre. SIc Oopyrigho tfifce saCsop etela 65 -HCG 1121eneva 02 T.le 22 14 + 10 947 11 Fxa + 22 14 0 94774 9 Eam-il ocpyrithgios.

21、ogr Web wwwi.soo.rg ENISO4762:2004OSI 6744002:2)E( ISO 4002 r llAithgs reservde iii Contents Page 1 Scope 1 2 Normative references 1 3 Dimensions 2 4 Requirements and reference International Standards . 9 5 Designation 9 Annex A (informative) Masses . 10 ENISO4762:2004ISO :2674(4002)E iv ISO 4002 Al

22、l rithgs reresvde Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a sub

23、ject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (I

24、EC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical commit

25、tees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be

26、 held responsible for identifying any or all such patent rights. ISO 4762 was prepared by Technical Committee ISO/TC 2, Fasteners. This fourth edition cancels and replaces the third edition (ISO 4762:1997), which has been technically revised. ENISO4762:2004ANRETNIITOTS LANDNADRA OSI 6744002:2)E( ISO

27、 4002 r llAithgs reservde 1 Hexagon socket head cap screws 1S c o p e This International Standard specifies the characteristics of hexagon socket head cap screws with coarse pitch thread from M1,6 up to and including M64 and product grade A. For approximate masses of screws see Annex A. If, in speci

28、al cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, e.g ISO 261, ISO 888, ISO 898-1, ISO 965-2. ISO 3506-1, ISO 8839 and ISO 4759-1. 2 Normative references The following referenced documents are

29、indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and designations of dimensions

30、ISO 261, ISO general-purpose metric screw threads General plan ISO 888, Bolts, screws and studs Nominal lengths, and thread lengths for general purpose bolts ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs ISO 965-2, ISO general purp

31、ose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium quality ISO 965-3, ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads ISO 3269, Fasteners Acceptance inspection ISO 3506-1,

32、Mechanical properties of corrosion-resistant stainless-steel fasteners Part 1: Bolts, screws and studs ISO 4042, Fasteners Electroplated coatings ISO 4753, Fasteners Ends of parts with external ISO metric thread ISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grade

33、s A, B and C ISO 6157-1, Fasteners Surface discontinuities Part 1: Bolts, screws and studs for general requirements ISO 6157-3, Fasteners Surface discontinuities Part 3: Bolts, screws and studs for special requirements ISO 8839, Mechanical properties of fasteners Bolts, screws, studs and nuts made o

34、f non-ferrous metals ISO 8992, Fasteners General requirements for bolts, screws, studs and nuts ENISO4762:2004ISO :2674(4002)E 2 ISO 4002 All rithgs reresvde ISO 10683, Fasteners Non-electrolytically applied zinc flake coatings ISO 23429, Gauging of hexagon sockets 3 Dimensions See Figure 1 and Tabl

35、e 1. Symbols and designations of dimensions are defined in ISO 225. Maximum underhead fillet , see Table 1 Figure 1 l f, max = 1,7r max r max = d a, max d s, max 2 r min ENISO4762:2004OSI 6744002:2)E( ISO 4002 r llAithgs reservde 3 Permissible alternative form of socket Top and bottom edge opf the h

36、ead For broached sockets which are at the maximum limit of size the overcut resulting from drilling shall not exceed 1/3 of the length of any flat of the socket which is . a A slight rounding or countersink at the mouth of the socket is permissible. b Point chamfered or for sizes M4 and below “as ro

37、lled” according to ISO 4753. c Incomplete thread . dapplies if values of are specified. e Top edge of head may be rounded or chamfered as shown at the option of the manufacturer. f Bottom edge of head may be rounded or chamfered to but in every case shall be free from burrs. Figure 1 (continued) e/2

38、 u 2P d s l s, min d w ENISO4762:2004ISO :2674(4002)E 4 ISO 4002 All rithgs erresvde Table 1 Dimensions Dimensions in millimetres Thread ( ) M1,6 M2 M2,5 M3 M4 M5 M6 M8 M10 M12 a 0,35 0,4 0,45 0,5 0,7 0,8 1 1,25 1,5 1,75 b ref. 15 16 17 18 20 22 24 28 32 36 max. c 3,00 3,80 4,50 5,50 7,00 8,50 10,00

39、 13,00 16,00 18,00 max. d 3,14 3,98 4,68 5,68 7,22 8,72 10,22 13,27 16,27 18,27 min. 2,86 3,62 4,32 5,32 6,78 8,28 9,78 12,73 15,73 17,73 max. 2 2,6 3,1 3,6 4,7 5,7 6,8 9,2 11,2 13,7 max. 1,60 2,00 2,50 3,00 4,00 5,00 6,00 8,00 10,00 12,00 min. 1,46 1,86 2,36 2,86 3,82 4,82 5,82 7,78 9,78 11,73 e, f

40、 min. 1,733 1,733 2,303 2,873 3,443 4,583 5,723 6,863 9,149 11,429 max 0,34 0,51 0,51 0,51 0,6 0,6 0,68 1,02 1,02 1,45 max. 1,60 2,00 2,50 3,00 4,00 5,00 6,0 8,00 10,00 12,00 min. 1,46 1,86 2,36 2,86 3,82 4,82 5,7 7,64 9,64 11,57 min. 0,1 0,1 0,1 0,1 0,2 0,2 0,25 0,4 0,4 0,6 f nom. 1,5 1,5 2 2,5 3 4

41、 5 6 8 10 max. 1,58 1,58 2,08 2,58 3,08 4,095 5,14 6,14 8,175 10,175 min. 1,52 1,52 2,02 2,52 3,02 4,020 5,02 6,02 8,025 10,025 min. 0,7 1 1,1 1,3 2 2,5 3 4 5 6 max. 0,16 0,2 0,25 0,3 0,4 0,5 0,6 0,8 1 1,2 min 2,72 3,48 4,18 5,07 6,53 8,03 9,38 12,33 15,33 17,23 min. 0,55 0,55 0,85 1,15 1,4 1,9 2,3

42、3,3 4 4,8 g Shank length and grip length nom. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. 2,5 2,3 2,7 3 2,8 3,2 4 3,76 4,24 5 4,76 5,24 6 5,76 6,24 8 7,71 8,29 10 9,71 10,29 12 11,65 12,35 d P b d k d a d s e l f k r s t v d w w l l s

43、 l g l s l g l s l g l s l g l s l g l s l g l s l g l s l g l s l g l s l g l s l g ENISO4762:2004OSI 402:267)E(40 ISO 4002 All rithgs reresvde 5 16 15,65 16,35 20 19,58 20,42 2 4 25 24,58 25,42 5,75 8 4,5 7 30 29,58 30,42 9,5 12 6,5 10 4 8 35 34,5 35,5 11,5 15 9 13 6 11 40 39,5 40,5 1 6 , 52 01 41

44、 81 11 65 , 7 51 2 45 44,5 45,5 19 23 16 21 10,75 17 5,5 13 50 49,5 50,5 24 28 21 26 15,75 22 10,5 18 55 54,4 55,6 26 31 20,75 27 15,5 23 10,25 19 60 59,4 60,6 31 36 25,75 32 20,5 28 15,25 24 65 64,4 65,6 30,75 37 25,5 33 20,25 29 70 69,4 70,6 35,75 42 30,5 38 25,25 34 80 79,4 80,6 45,75 52 40,5 48

45、35,25 44 90 89,3 90,7 50,5 58 45,25 54 100 99,3 100,7 60,5 68 55,25 64 110 109,3 110,7 65,25 74 120 119,3 120,7 75,25 84 130 129,2 130,8 140 139,2 140,8 150 149,2 150,8 160 159,2 160,8 180 179,2 180,8 200 199,075 200,925 220 219,075 220,925 240 239,075 240,925 260 258,95 261,05 280 278,95 281,05 300

46、 298,95 301,05 Table 1 Dimensions (continued) ENISO4762:2004ISO :2674(4002)E 6 ISO 4002 All rithgs erresvde Dimensions in millimetres Thread ( ) (M14) h M16 M20 M24 M30 M36 M42 M48 M56 M64 a 222 , 533 , 544 , 555 , 56 b ref. 40 44 52 60 72 84 96 108 124 140 max. c 21,00 24,00 30,00 36,00 45,00 54,00

47、 63,00 72,00 84,00 96,00 max. d 21,33 24,33 30,33 36,39 45,39 54,46 63,46 72,46 84,54 96,54 min. 20,67 23,67 29,67 35,61 44,61 53,54 62,54 71,54 83,46 95,46 max. 15,7 17,7 22,4 26,4 33,4 39,4 45,6 52,6 63 71 max. 14,00 16,00 20,00 24,00 30,00 36,00 42,00 48,00 56,00 64,00 min. 13,73 15,73 19,67 23,6

48、7 29,67 35,61 41,61 47,61 55,54 63,54 e, f min. 13,716 15,996 19,437 21,734 25,154 30,854 36,571 41,131 46,831 52,531 max 1,45 1,45 2,04 2,04 2,89 2,89 3,06 3,91 5,95 5,95 max. 14,00 16,00 20,00 24,00 30,00 36,00 42,00 48,00 56,00 64,00 min. 13,57 15,57 19,48 23,48 29,48 35,38 41,38 47,38 55,26 63,26 min. 0,6 0,6 0,8 0,8