BS EN ISO 5620-1-1997 Shipbuilding and marine structures Filling connection for drinking water tanks General requirements《造船和海上建筑物 饮用水箱注水接头 总要求》.pdf

1、BRITISH STANDARD BS EN ISO 5620-1:1997 Shipbuilding and marine structures Filling connection for drinking water tanks Part 1: General requirements The European Standard EN ISO 5620-1:1996 has the status of a British Standard ICS 47.020.30BSENISO5620-1:1997 This British Standard, having been prepared

2、 under the directionof the Engineering SectorBoard, was published underthe authority of the Standards Board and comes intoeffect on 15 March 1997 BSI 12-1998 The following BSI references relate to the work on this standard: Committee reference SME/32 Draft for comment 91/73831 DC ISBN 0 580 26649 4

3、Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee SME/32, Steering Committee for shipbuilding and marine standards, upon which the following bodies were represented: British Marine Equipment Council British Maritime Technol

4、ogy British Motor Ship Owners Association British Waterways Board Chamber of Shipping Lloyds Register of Shipping Marine Safety Agency Ministry of Defence Shipbuilders and Shiprepairers Association Amendments issued since publication Amd. No. Date CommentsBSENISO5620-1:1997 BSI 12-1998 i Contents Pa

5、ge Committees responsible Inside front cover National foreword ii Foreword 2 Text of ISO 5620-1 1 List of references Inside back coverBSENISO5620-1:1997 ii BSI 12-1998 National foreword This British Standard has been prepared by Technical Committee SME/32 and is the English language version of EN IS

6、O 5620-1:1996 Shipbuilding and marine structures Filling connection for drinking water tanks Part 1: General requirements, published by the European Committee for Standardization (CEN). It is identical with ISO 5620-1:1992 published by the International Organization for Standardization. It supersede

7、s BS MA 85:1979 which is withdrawn. EN ISO5620-1:1996 was produced as a result of international discussions in which the United Kingdom took an active part. Cross-references The British Standards corresponding to the European Standards referred to in the text are identical in number and title with t

8、hose given in annex ZA. The Technical Committee has reviewed the provisions of ISO1461:1973, to which reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. A British Standard does not purport to include all the necessary provisions of a co

9、ntract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISO title page, page 2,

10、 the ISO title page, page ii to iv, pages 1 to 4, aninsidebackcover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM

11、 EN ISO 5620-1 November 1996 ICS 47.020.30 Descriptors: See ISO document English version Shipbuilding and marine structures Filling connectionfordrinking water tanks Part1:Generalrequirements (ISO 5620-1:1992) Construction navale et structures maritimes Raccordement de remplissage des rservoirs eau

12、potable Partie 1: Exigences gnrales (ISO 5620-1:1992) Schiffbau und Meerestechnik bernahme-Flanschanschlu fr Trinkwassertanks Teil1: Allgemeine Anforderungen (ISO 5620-1:1992) This European Standard was approved by CEN on 1996-10-19. CEN members are bound to comply with the CEN/CENELEC Internal Regu

13、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The Eu

14、ropean Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the na

15、tional standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr

16、Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN ISO 5620-1:1996 EENISO5620-1:1996 BSI 12-1998 2 Foreword The text of the International Standard from Technical Committee ISO/TC8 “Ships and mairne technology” of the International Orga

17、nization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 300 “Sea-going vessels and mairne technology”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an id

18、entical text or by endorsement, at the latest by May1997 and conflicting national standards shall be withdrawn at the latest by May1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: A

19、ustria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 5620-1:1988 has been approved by CEN as a European Standard

20、 without any modification. NOTENormative references to International Standards are listed in annex ZA (normative).EN ISO5620-1:1996 ii BSI 12-1998 Contents Page Foreword ii 1 Scope 1 2 Normative references 1 3 General requirements 1 3.1 Connection principle 1 3.2 Flange connection 1 3.3 Securing of

21、connection and main dimensions 1 3.4 Sealing 1 3.5 Materials and finish 1 4 Composition 1 5 Designation 3 6 Installation recommendation 3 Annex ZA (normative) Normative references to international publications with their relevant European publications 4 Figure 1 Connection principle 2 Figure 2 Matin

22、g dimensions for watering flanges 2 Figure 3 Composition and main dimensions of ship piping connection 2 Figure 4 Installation example 3 Table 1 Parts list 3 List of references Inside back coverEN ISO 5620-1:1996 BSI 12-1998 iii Foreword ISO (the International Organization for Standardization) is a

23、worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented

24、 on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards ado

25、pted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 5620-1 was prepared by Technical Committee ISO/TC 8, Shipbuilding and marine st

26、ructures. This first edition of ISO5620-1 together with ISO5620-2 cancel and replace the first edition of ISO5620, of which they constitute a technical revision. ISO 5620 consists of the following parts, under the general title Shipbuilding and marine structures Filling connection for drinking water

27、 tanks: Part 1: General requirements; Part 2: Components. Descriptors: Shipbuilding, ships, water supply, potable water, tanks (containers), piping, water pipelines, pipe joints, connecting joints, specifications, dimensions, designation, installation.iv blankENISO5620-1:1996 BSI 12-1998 1 1 Scope I

28、SO5620 specifies the drinking water connection aboard ships for attachment of piping from another ship or from a land distribution system. This part of ISO5620 specifies the general requirements, the composition and the designation of the complete filling connection and gives a recommendation for th

29、e installation aboard ships. NOTE 1Details for the components of the filling connection are given in ISO5620-2, both for the distribution system and for the ship. NOTE 2The general rules for drinking water distribution systems fall within the competence of national port authorities and are outside t

30、he scope of ISO5620. The connection specified in ISO5620 safeguards drinking water tanks from being filled with any other fluid. Additionally it safeguards the supply piping of the drinking water from contamination by any other liquids. NOTE 3ISO5620 may be applied to inland vessels if agreed betwee

31、n the users. NOTE 4Users of ISO5620 should note that, while observing the requirements of the standard, they should at the same time ensure compliance with such statutary requirements, rules and regulations as may apply to the individual ship concerned. 2 Normative references The following standards

32、 contain provisions which, through reference in this text, constitute provisions of this part of ISO5620. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO5620 are encouraged to investigate the po

33、ssibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO1461:1973, Metallic coatings Hot dip galvanized coatings on fabricated ferrous products Requirements. ISO5620-2:1992, Shipbuilding

34、 and marine structures Filling connection for drinking water tanks Part 2: Components. 3 General requirements 3.1 Connection principle The connection is carried out by means of special watering flanges. A flange fitted to the ship piping (flange B inFigure 1) and a second one (flange A) to the pipin

35、g or hose line from the drinking water supply source, at which the ship watering flange (B) has a blind flange (C). 3.2 Flange connection 3.2.1 The watering flanges A, B and C shall have a special five-point connection in accordance with the dimensions given inFigure 2. 3.2.2 The nominal diameter of

36、 flange connections and piping shall be DN 65. 3.2.3 The nominal pressure of flange connections and piping shall be PN 16. 3.3 Securing of connection and main dimensions To prevent unauthorized access to the connection on the ship, the blind flange (C) shall be secured by a corrosion-resistant padlo

37、ck which is fitted to a securing bolt at the lower part of the connection, as shown inFigure 3. 3.4 Sealing A gasket of suitable material for drinking water systems shall be fitted to the ship watering flange(B). 3.5 Materials and finish 3.5.1 The flange connection shall be made of weldable steel wi

38、th a tensile strength of at least360MPa (360 N/mm 2 ). 3.5.2 Corrosion protection shall be obtained by hot galvanizing in accordance with ISO1461 or by other coating which does not constitute a health hazard. 4 Composition The composition (code letter Z) of the ship piping connection shall be as giv

39、en inFigure 3 consisting of components as listed inTable 1. For details of components, see ISO5620-2. The stud-bolt (serial No. 5) and the securing bolt (serial No. 3) shall be spot-welded or fastened by means of suitable adhesive into the ship watering flange (serial No. 1).ENISO5620-1:1997 2 BSI 1

40、2-1998 Figure 1 Connection principle Figure 2 Mating dimensions for watering flanges Figure 3 Composition and main dimensions of ship piping connectionENISO5620-1:1996 BSI 12-1998 3 Table 1 Parts list 5 Designation For reference and ordering purposes, the complete ship piping connection for drinking

41、 water tanks shall be designated, by the following elements, in the order given: denomination, abbreviated: Connection; number of this part of ISO5620: ISO 5620-1; code letter for the composition: Z. EXAMPLE A ship piping connection for drinking water tanks according to this part of ISO5620, composi

42、tion Z is designated as follows: Connection ISO 5620-1 Z 6 Installation recommendation The ships flange connection should be installed in a suspended position as shown inFigure 4. The use of a bent pipe is recommended. Serial No. Number of components Description Code letter Reference clause in ISO 5

43、620-2:1992 1 1 Ship watering flange B 4 2 1 Ship watering blind flange C 5 3 1 Securing bolt D 6 4 1 Gasket E 7 5 5 Stud-bolt 8 6 5 Nut 9 7 1 Padlock 10 8 1 Securing chain 11 Figure 4 Installation exampleENISO5620-1:1997 4 BSI 12-1998 Annex ZA (normative) Normative references to international public

44、ations with their relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subseque

45、nt amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. Publication Year Title EN Year ISO 5620-2 1992 Shipbuilding and marine s

46、tructures Filling connection for drinking water tanks EN ISO 5620-2 1996 Part 2: ComponentsBSENISO5620-1:1997 BSI 12-1998 List of references See national foreword.BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

47、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on

48、 standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the qu

49、ality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all