BS EN ISO 5620-2-1997 Shipbuilding and marine structures Filling connection for drinking water tanks Components《造船和海上建筑物 饮用水箱注水接头 组件》.pdf

1、BRITISH STANDARD MARINE SERIES BS EN ISO 5620-2:1997 Shipbuilding and marine structures Filling connection for drinking water tanks Part 2: Components The European Standard EN ISO 5620-2:1996 has the status of a British Standard ICS 47.020.30BSEN ISO 5620-2:1997 This British Standard, having been pr

2、epared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 April 1997 BSI 11-1998 The following BSI references relate to the work on this standard: Committee reference: SME/32 Draft for comment: 91/73832 DC ISBN 0

3、580 26650 8 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee SME/32, Steering Committee for shipbuilding and marine standards, upon which the following bodies were represented: British Marine Equipment Council British Mari

4、time Technology British Motor Ship Owners Association British Waterways Board Chamber of Shipping Lloyds Register of Shipping Marine Safety Agency Ministry of Defence Shipbuilders and Shiprepairers Association Amendments issued since publication Amd. No. Date CommentsBS EN ISO5620-2:1997 BSI 11-1998

5、 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN ISO 5620-2 1 List of references Inside back coverBS EN ISO 5620-2:1997 ii BSI 11-1998 National foreword This British Standard has been prepared by Technical Committee SME/32 and is the English langu

6、age version of ENISO5620-2:1996 Shipbuilding and marine structures Filling connection for drinking water tanks Part 2: Components, published by the European Committee for Standardization (CEN). It is identical with ISO5620-2:1992 published by the International Organization for Standardization. It su

7、persedes BSMA 85:1979 which is withdrawn. EN ISO 5620-2:1996 was produced as a result of international discussions in which the United Kingdom took an active part. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible fo

8、r their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references The British Standards corresponding to the European Standards referred to in the text are identical in number and title with those given in annex ZA. Publicatio

9、n referred to Corresponding British Standard ISO 4026:1977 BS 4168 Hexagon socket screws and wrench keys: metric series Part 2:1994 Specification for hexagon socket set screws with flat point Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theENISO titl

10、e page, page 2, the ISO title page, page ii, pages1to10, aninsideback cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPIS

11、CHE NORM EN ISO 5620-2 November 1996 ICS 47.020.30 Descriptors: See ISO document English version Shipbuilding and marine structures Filling connection for drinking water tanks Part 2: Components (ISO5620-2:1992) Construction navale et structures maritimes Raccordement de remplissage des rservoirs ea

12、u potable Partie 2: Elments constitutifs (ISO 5620-2:1992) Schiffbau und Meerestechnik bernahme-Flanschanschlu fr Trinkwassertanks Teil 2: Einzelteile (ISO5620-2:1992) This European Standard was approved by CEN on 1996-10-19. CEN members are bound to comply with the CEN/CENELEC Internal Regulations

13、which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European S

14、tandards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national s

15、tandards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung

16、Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN ISO 5620-2:1996 EENISO5620-2:1996 BSI 11-1998 2 Foreword The text of the International Standard from Technical Committee ISO/TC8 “Ships and mairne technology” of the International Organization

17、 for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC300 “Sea-going vessels and marine technology”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical t

18、ext or by endorsement, at the latest by May1997 and conflicting national standards shall be withdrawn at the latest by May 1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

19、Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO5620-2:1992 has been approved by CEN as a European Standard without

20、any modification. NOTENormative references to International Standards are listed in annexZA (normative). Contents Page Foreword ii 1 Scope 5 2 Normative references 5 3 Supply watering flange 5 4 Ship watering flange 5 5 Ship watering blind flange 7 6 Securing bolt 8 7 Gasket 8 8 Stud-bolts 8 9 Nuts

21、8 10 Padlock 8 11 Securing chain 8 Annex ZA (normative) Normative references to international publications with their relevant European publications 10 Figure 1 Dimensions of supply watering flange 6 Figure 2 Dimensions for ship watering flange 6 Figure 3 Dimensions of ship watering blind flange 7 F

22、igure 4 Dimensions of securing bolt 9 Figure 5 Dimensions of gasket 9 Figure 6 Example for securing chain 9ENISO 5620-2:1996 ii BSI 11-1998 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISOmemberbodies). The work of preparin

23、g International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liai

24、son with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publicatio

25、n as an International Standard requires approval by at least 75% of the member bodies casting a vote. International Standard ISO5620-2 was prepared by Technical Committee ISO/TC8, Shipbuilding and marine structures. This first edition of ISO5620-2 together with ISO5620-1 cancel and replace the first

26、 edition of ISO5620, of which they constitute a technical revision. ISO 5620 consists of the following parts, under the general title Shipbuilding and marine structures Filling connection for drinking water tanks: Part 1: General requirements Part 2: Components Descriptors: Shipbuilding, ships, wate

27、r supply, potable water, tanks (containers), piping, water pipelines, pipe joints, connecting joints, components, specifications, dimensions, designation.ENISO 5620-2:1996 BSI 11-1998 5 1 Scope ISO 5620 specifies the drinking water connection aboard ships for attachment of piping from another ship o

28、r from a land distribution system. This part of ISO 5620 specifies the technical details of the components of the filling connection and lays down the designation of the main components such as flanges, securing bolts and gasket. NOTE 1Part 1 of ISO5620 specifies the general requirements, the compos

29、ition and the designation of the complete filling connection. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO5620. At the time of publication, the editions indicated were valid. All standards are subje

30、ct to revision, and parties to agreements based on this part of ISO5620 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 630:1980, Structural

31、steels. ISO 683-1:1987, Heat-treatable steels, alloy steels and free-cutting steels Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products. ISO 1302:1992, Technical drawings Method of indicating surface texture. ISO 2341:1986, Clevis pins with head. ISO

32、4016:1988, Hexagon head bolts Product grade C. ISO 4026:1977, Hexagon socket set screws with flat point. ISO 5620-1:1992, Shipbuilding and marine structures Filling connection for drinking water tanks Part 1: General requirements. 3 Supply watering flange The supply watering flange (flange A in ISO5

33、620-1) shall be used for the piping or hose line to the drinking water supply source. 3.1 Dimensions The dimensions of the supply watering flange shall be as shown in Figure 1. 3.2 Material The supply watering flange shall be made of steel in accordance with ISO630, grade Fe360, as the minimum quali

34、ty. Alternatively ship-quality steel plate grade A may be used, provided that it has equivalent mechanical and welding properties. 3.3 Designation A supply watering flange (flange A) that meets the requirements of this part of ISO5620 shall be designated: Flange ISO 5620-2 A 4 Ship watering flange 4

35、.1 Dimensions The dimensions of the ship watering flange (flangeBinISO5620-1) shall be as given in Figure 2. 4.2 Material The ship watering flange shall be made of steel in accordance with ISO630, grade Fe360, as the minimum quality. Alternatively ship-quality steel plate grade A may be used, provid

36、ed that it has equivalent mechanical and welding properties. 4.3 Designation A ship watering flange (flange B) that meets the requirements of this part of ISO5620 shall be designated: Flange ISO 5620-2 BENISO 5620-2:1996 6 BSI 11-1998 Figure 1 Dimensions of supply watering flange Figure 2 Dimensions

37、 for ship watering flangeENISO 5620-2:1996 BSI 11-1998 7 5 Ship watering blind flange 5.1 Dimensions The dimensions of the ship watering blind flange (flangeCinISO5620-1) shall be as given in Figure 3. 5.2 Material The ship watering blind flange shall be made of steel in accordance with ISO630, grad

38、e Fe360, as the minimum quality. Alternatively ship-quality steel plate grade A may be used, provided that it has equivalent mechanical and welding properties. 5.3 Designation A ship watering blind flange (flange C) that meets the requirements of this part of ISO5620 shall be designated: Flange ISO

39、5620-2 C Figure 3 Dimensions of ship watering blind flangeENISO 5620-2:1996 8 BSI 11-1998 6 Securing bolt 6.1 Dimensions The dimensions of the securing bolt in (codeletterDinISO5620-1) shall be as given Figure 4. Where semi-finished products are used, a clevis pin according to ISO2341A20 85St shall

40、be used. 6.2 Material The securing bolt shall be made of non-corrodible steel in accordance with ISO683-1, grade H as the minimum quality. 6.3 Designation A securing bolt (code letter D) that meets the requirements of this part of ISO5620 shall be designated: Bolt ISO 5620-2 D 7 Gasket 7.1 Dimension

41、s The dimensions of the gasket (code letter E in ISO5620-1) shall be as given inFigure 5. 7.2 Material Gaskets shall be made of seawater-resistant elastomer material, which is acceptable for drinking water. 7.3 Designation A gasket (code letter E) that meets the requirements of this part of ISO5620

42、shall be designated: Gasket ISO 5620-2 E 8 Stud-bolts Stud-bolts M16 of non-corrodible steel of grade H in accordance with ISO683-1, as the minimum quality, shall be used and fitted in the watering flange. Alternatively hexagon socket set screws with a flat point in accordance with ISO4026 or normal

43、 hexagon bolts in accordance with ISO4016, both made of non-corrodible steel, may be used. 9 Nuts Hexagon cap nuts M16 shall be used. They shall be made of non-corrodible steel grade H in accordance with ISO683-1, as the minimum quality. Alternatively ordinary hexagon nuts M16 may be used, provided

44、that they are of same material. 10 Padlock The hinged locking shall have a width of approximately 30mm, with its diameter approximately 8mm. The internal components of the padlock shall be of non-corrodible metallic materials (for instance brass). All other components of the padlock may be made of s

45、teel. The padlock should have an eye serving for the connection of the securing chain. 11 Securing chain Securing chains shall be made of non-corrodible steel. The securing chain should have at one end an S-shaped hook for fastening the chain at the securing bolt: on the other end it should have a s

46、ecuring ring for padlock connection. Common small chains without quality requirements may be used, for instance knotted link chains as shown in Figure 6.ENISO 5620-2:1996 BSI 11-1998 9 Figure 4 Dimensions of securing bolt Figure 5 Dimensions of gasket Figure 6 Example for securing chainENISO 5620-2:

47、1996 10 BSI 11-1998 Annex ZA (normative) Normative references to international publications with their relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places

48、in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred

49、 to applies. Publication Year Title EN Year ISO 2341 1986 Celvis pins with head EN 22341 1992 ISO 4016 1988 Hexagon head bolts Product grade C EN 24016 1991 ISO 5620-1 1992 Shipbuilding and marine structures Filling connection for drinking water tanks Part 1: General requirements EN ISO 5620-1 1996BSEN ISO 5620-2:1997 BSI 11-1998 List of references See national foreword.BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |