BS EN ISO 636-2017 Welding consumables Rods wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels Classification《焊接消耗品 非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属 分类》.pdf

1、Welding consumables Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels Classification (ISO 636:2017)BS EN ISO 636:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 636

2、June 2017 ICS 25.160.20 Supersedes EN ISO 636:2015English Version Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017) Produits consommables pour le soudage - Baguettes et fils pour dpts par soudage TIG des a

3、ciers non allis et des aciers grains fins - Classification (ISO 636:2017) Schweizustze - Stbe, Drhte und Schweigut zum Wolfram-Inertgasschweien von unlegierten Sthlen und Feinkornsthlen - Einteilung (ISO 636:2017) This European Standard was approved by CEN on 20 April 2017. CEN members are bound to

4、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CEN

5、ELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has th

6、e same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb

7、ourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000

8、 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 636:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 636:2017. It is identical to ISO 636:2017. It supersedes BS EN ISO 636:2015, whi

9、ch is withdrawn.The UK participation in its preparation was entrusted to Technical Committee WEE/39, Welding consumables.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a co

10、ntract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 96128 1ICS 25.160.20Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the

11、authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 636:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 636 June 2017 ICS 25.160.20 Supersedes EN ISO 636:2015English Version We

12、lding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017) Produits consommables pour le soudage - Baguettes et fils pour dpts par soudage TIG des aciers non allis et des aciers grains fins - Classification (ISO 636:

13、2017) Schweizustze - Stbe, Drhte und Schweigut zum Wolfram-Inertgasschweien von unlegierten Sthlen und Feinkornsthlen - Einteilung (ISO 636:2017) This European Standard was approved by CEN on 20 April 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

14、 conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard

15、exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national

16、 standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia,

17、 Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any

18、 means reserved worldwide for CEN national Members. Ref. No. EN ISO 636:2017 EBS EN ISO 636:2017EN ISO 636:2017 (E) 2 European foreword This document (EN ISO 636:2017) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 1

19、21 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2017, and conflicting national standards shall be withdrawn at t

20、he latest by December 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 636:2015. According to the CEN-CENELEC In

21、ternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,

22、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 636:2017 has been approved by CEN as EN ISO 636:2017 without any modificati

23、on. ISO 636:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Classification 24.1 General . 25 Symbols and requirements 25.1 Symbol for the product/process 25.2 Symbol for strength and elongation of all-weld metal . 35.3 Symbol for impact properties of a

24、ll-weld metal . 45.4 Symbol for the chemical composition of rods or wires . 46 Mechanical tests 96.1 Preheating and interpass temperatures . 96.2 Welding conditions and pass sequence 106.3 PWHT condition 107 Chemical analysis 108 Rounding procedure 119 Retesting 1110 Technical delivery conditions 11

25、11 Examples of designation 11Bibliography .13 ISO 2017 All rights reserved iiiContents PageBS EN ISO 636:2017ISO 636:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Classification 24.1 General . 25 Symbols and requirements 25.1 Symbol for the product/p

26、rocess 25.2 Symbol for strength and elongation of all-weld metal . 35.3 Symbol for impact properties of all-weld metal . 45.4 Symbol for the chemical composition of rods or wires . 46 Mechanical tests 96.1 Preheating and interpass temperatures . 96.2 Welding conditions and pass sequence 106.3 PWHT c

27、ondition 107 Chemical analysis 108 Rounding procedure 119 Retesting 1110 Technical delivery conditions 1111 Examples of designation 11Bibliography .13 ISO 2017 All rights reserved iiiContents PageBS EN ISO 636:2017ISO 636:2017(E)ForewordISO (the International Organization for Standardization) is a w

28、orldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented

29、on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this

30、 document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Dir

31、ectives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the de

32、velopment of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of

33、 ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.The committee responsible for this doc

34、ument is ISO/TC 44, Welding and allied processes, Subcommittee SC 3, Welding consumables.This fifth edition cancels and replaces the fourth edition (ISO 636:2015), of which it constitutes a minor revision with the following changes: updates to the latest ISO style (including mandatory Clause 3 and s

35、ubsequent renumbering of clauses and subclauses); in Table 3B, the limits for Ti in the last column have been correctly assigned against NCCT1, NCCT2 and N1M2T and not against N9, NCC and NCC1 as in the 2015 edition; the newly agreed wording for Clause 8, “Rounding procedure”, has been introduced.Re

36、quests for official interpretations of any aspect of this document should be directed to the Secretariat of ISO/TC 44/SC 3 via your national standards body. A complete listing of these bodies can be found at www .iso .org.iv ISO 2017 All rights reservedBS EN ISO 636:2017ISO 636:2017(E)ForewordISO (t

37、he International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical commit

38、tee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotech

39、nical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted

40、in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent righ

41、ts. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not const

42、itute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ i

43、so/ foreword .html.The committee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 3, Welding consumables.This fifth edition cancels and replaces the fourth edition (ISO 636:2015), of which it constitutes a minor revision with the following changes: updates to

44、 the latest ISO style (including mandatory Clause 3 and subsequent renumbering of clauses and subclauses); in Table 3B, the limits for Ti in the last column have been correctly assigned against NCCT1, NCCT2 and N1M2T and not against N9, NCC and NCC1 as in the 2015 edition; the newly agreed wording f

45、or Clause 8, “Rounding procedure”, has been introduced.Requests for official interpretations of any aspect of this document should be directed to the Secretariat of ISO/TC 44/SC 3 via your national standards body. A complete listing of these bodies can be found at www .iso .org.iv ISO 2017 All right

46、s reserved ISO 636:2017(E)IntroductionThis document provides a classification for the designation of rods and wires in terms of their chemical composition and, where required, in terms of the yield strength, tensile strength, and elongation of the all-weld metal. The ratio of yield to tensile streng

47、th of weld metal is generally higher than that of parent metal. Matching weld metal yield strength to parent metal yield strength will not necessarily ensure that the weld metal tensile strength matches that of the parent material. Where the application requires matching tensile strengths, selection

48、 of consumables is made by reference to column 3 of Table 1A or Table 1B.Of note is that the mechanical properties of all-weld metal test specimens used to classify the rods and wires vary from those obtained in production joints because of differences in welding procedure such as diameter, width of

49、 weave, welding position, and material composition.The classification according to system A is mainly based on EN 1668:19971. The classification according to system B is mainly based upon standards used around the Pacific Rim. ISO 2017 All rights reserved vBS EN ISO 636:2017BS EN ISO 636:2017Welding consumables Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels Classification1 ScopeThis document specifies requirements for classification of rods and wires in the as-welded cond