BS EN ISO 862-1991 Glossary of terms for surface active agents《表面活性剂术语词汇》.pdf

1、BRITISH STANDARD BS EN ISO 862:1995 Incorporating Amendment Nos. 1 and 2 Glossary of Terms for surface active agents The European Standard EN ISO 862:1995 has the status of a British Standard ICS 71.100.40BSENISO862:1995 This British Standard, having been prepared under the directionof the Chemicals

2、 Standards Policy Committee, waspublished under the authorityof the Standards Boardand comes into effect on 31 October 1991 BSI 04-2000 The following BSI references relate to the work on this standard: Committee reference CIC/34 Draft for comment 91/52313 DC ISBN 0 580 20113 9 Committees responsible

3、 for this British Standard The preparation of this British Standard was entrusted by the Chemicals Standards Policy Committee (CIC/-) to Technical Committee CIC/34, upon which the following bodies were represented: British Association for Chemical Specialities Chemical Industries Association Chemica

4、l Industries Association (GOSIP) Department of Trade and Industry (Laboratory of the Government Chemist) Ministry of Defence Royal Society of Chemistry Soap and Detergent Industry Association Amendments issued since publication Amd. No. Date Comments 7838 August 1993 8572 December 1995 Indicated by

5、a sideline in the marginBSENISO862:1995 BSI 04-2000 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN ISO 862 3BSENISO862:1995 ii BSI 04-2000 National foreword This British Standard has been prepared under the direction of the Chemicals Standards Po

6、licy Committee. It is identical with ISO 862:1984 “Surface active agents Vocabulary”, published by the International Organization for Standardization (ISO). In 1991 the European Committee for Standardization (CEN) accepted ISO 862:1984 as European Standard EN ISO 862:1995. As a consequence of implem

7、enting the European Standard this British Standard is renumbered BS EN ISO 862 and any reference to BS 7498 should be read as a reference to BS EN ISO 862. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their

8、correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISOtitle page, pages2 to 60 and a back cover. This standard has been updated (see co

9、pyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 862 August 1995 ICS 71.100.40 Descriptors: Surfactants, vocabulary English version Surface active agents Vocabulary

10、 Trilingual version (ISO 862:1984/Cor 1:1993) Agents de surface Vocabulaire Edition trilingue (ISO 862:1984/Cor 1:1993) Grenzflchenaktive Verbindungen Begriffe (ISO 862:1984/Cor 1:1993) This European Standard was approved by CEN on 1995-02-05. CEN members are bound to comply with the CEN/CENELEC Int

11、ernal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN memb

12、er. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members

13、 are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches

14、Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members Ref. No. EN ISO 862:1995 EENISO862:1995 BSI 04-2000 2 Foreword The text of the International Sta

15、ndard from ISO/TC 91, Surface active agents, of the International Organization for Standardization (ISO) has been taken over as a European Standard by the Technical Committee CEN/TC 276, Surface active agents. This European Standard shall be given the status of a national standard, either by publica

16、tion of an identical text or by endorsement, at the latest by February 1996, and conflicting national standards shall be withdrawn at the latest by February 1996. According with the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belg

17、ium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 Scope 3 Classification 3 Annex A 37 Annex B 46 English alphabetical index 50ENISO862:1995 BSI 04-2000 3ENISO

18、862:1995 4 BSI 04-2000ENISO862:1995 BSI 04-2000 5ENISO862:1995 6 BSI 04-2000ENISO862:1995 BSI 04-2000 7ENISO862:1995 8 BSI 04-2000ENISO862:1995 BSI 04-2000 9ENISO862:1995 10 BSI 04-2000ENISO862:1995 BSI 04-2000 11ENISO862:1995 12 BSI 04-2000ENISO862:1995 BSI 04-2000 13ENISO862:1995 14 BSI 04-2000ENI

19、SO862:1995 BSI 04-2000 15ENISO862:1995 16 BSI 04-2000ENISO862:1995 BSI 04-2000 17ENISO862:1995 18 BSI 04-2000ENISO862:1995 BSI 04-2000 19ENISO862:1995 20 BSI 04-2000ENISO862:1995 BSI 04-2000 21ENISO862:1995 22 BSI 04-2000ENISO862:1995 BSI 04-2000 23ENISO862:1995 24 BSI 04-2000ENISO862:1995 BSI 04-20

20、00 25ENISO862:1995 26 BSI 04-2000ENISO862:1995 BSI 04-2000 27ENISO862:1995 28 BSI 04-2000ENISO862:1995 BSI 04-2000 29ENISO862:1995 30 BSI 04-2000ENISO862:1995 BSI 04-2000 31ENISO862:1995 32 BSI 04-2000ENISO862:1995 BSI 04-2000 33ENISO862:1995 34 BSI 04-2000ENISO862:1995 BSI 04-2000 35ENISO862:1995 3

21、6 BSI 04-2000ENISO862:1995 BSI 04-2000 37ENISO862:1995 38 BSI 04-2000ENISO862:1995 BSI 04-2000 39ENISO862:1995 40 BSI 04-2000ENISO862:1995 BSI 04-2000 41ENISO862:1995 42 BSI 04-2000ENISO862:1995 BSI 04-2000 43ENISO862:1995 44 BSI 04-2000ENISO862:1995 BSI 04-2000 45ENISO862:1995 46 BSI 04-2000ENISO86

22、2:1995 BSI 04-2000 47ENISO862:1995 48 BSI 04-2000ENISO862:1995 BSI 04-2000 49ENISO862:1995 50 BSI 04-2000ENISO862:1995 BSI 04-2000 51ENISO862:1995 52 BSI 04-2000ENISO862:1995 BSI 04-2000 53ENISO862:1995 54 BSI 04-2000ENISO862:1995 BSI 04-2000 55ENISO862:1995 56 BSI 04-2000ENISO862:1995 BSI 04-2000 5

23、7ENISO862:1995 58 BSI 04-2000ENISO862:1995 BSI 04-2000 59ENISO862:1995 60 BSI 04-2000blankBS EN ISO 862:1995 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards i

24、n Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our p

25、roducts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers membe

26、rs an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In re

27、sponse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards throu

28、gh its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standa

29、rds developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the pu

30、blications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written p

31、ermission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.