BS EN ISO 10111-2002 Metallic and other inorganic coatings Measurement of mass per unit area Review of gravimetric and chemical analysis methods《金属和其它无机覆层 单位面积质量的测量 重量法和化学分析方法概述》.pdf

1、BRITISH STANDARD BS EN ISO 10111:2002 Metallic and other inorganic coatings Measurement of mass per unit area Review of gravimetric and chemical analysis methods The European Standard EN ISO 10111:2001 has the status of a British Standard ICS 25.220.40; 25.220.99 NO COPYING WITHOUT BSI PERMISSION EX

2、CEPT AS PERMITTED BY COPYRIGHT LAWBS EN ISO 10111:2002 This British Standard, having been prepared under the direction of the Sector Policy and Strategy Committee for Materials and Chemicals, was published under the authority of the Standards Policy and Strategy Committee on 15 January 2002 BSI 15 J

3、anuary 2002 ISBN 0 580 38844 1 National foreword This British Standard is the official English language version of EN ISO 10111:2001. It is identical with ISO 10111:2000. The UK participation in its preparation was entrusted to Technical Committee STI/37, Method of test for metallic and related inor

4、ganic coatings including corrosion tests, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may

5、 be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British S

6、tandards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals fo

7、r change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pag

8、es 1 to 15, the Annex ZA page, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO10111 December2001 ICS25.

9、220.20;25.220.40 Englishversion MetallicandotherinorganiccoatingsMeasurementofmass perunitareaReviewofgravimetricandchemicalanalysis methods(ISO10111:2000) Revtementsmtalliquesetautresrevtements inorganiquesMesuragedelamassesurfacique Prsentationdesmthodesdanalysegravimtriqueet chimique(ISO10111:200

10、0) MetallischeundandereanorganischeberzgeMessung derflchenbezogenenMassebersichtber gravimetrischeundchemischeAnalyseverfahren(ISO 10111:2000) ThisEuropeanStandardwasapprovedbyCENon16November2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthis

11、Europe an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlan

12、guagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherla

13、nds,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.N

14、o.ENISO10111:2001EForeword ThetextoftheInternationalStandardfromTechnicalCommitteeISO/TC107“Metallicand otherinorganiccoatings“oftheInternationalOrganizationforStandardization(ISO)hasbeen takenoverasanEuropeanStandardbyTechnicalCommitteeCEN/TC262“Metallicand otherinorganiccoatings“,thesecretariatofw

15、hichisheldbyBSI. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublication ofanidenticaltextorbyendorsement,atthelatestbyJune2002,andconflictingnational standardsshallbewithdrawnatthelatestbyJune2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizatio

16、nsof thefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium, CzechRepublic,Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy, Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnited Kingdom. Endorsementnotice ThetextoftheInternationalStandardISO101

17、11:2000hasbeenapprovedbyCENasa EuropeanStandardwithoutanymodification. NOTENormativereferencestoInternationalStandardsarelistedinannexZA(normative). ENISO10111:2001 Reference number ISO 10111:2000(E) INTERNATIONAL STANDARD ISO 10111 First edition 2000-06-15 Metallic and other inorganic coatings Meas

18、urement of mass per unit area Review of gravimetric and chemical analysis methods Revtements mtalliques et autres revtements inorganiques Mesurage de la masse surfacique Prsentation des mthodes danalyse gravimtrique et chimique ENISO10111:2001 ii ENISO10111:2001 iii Contents Page Foreword.iv 1 Scope

19、 1 2 Normative references 2 3 Terms and definitions .2 4 Principle3 5 Special equipment .3 6 Preparation of test specimen .3 7 Measurement of coated area 4 8 Determination of mass of coating by chemical analysis.4 9 Gravimetric determination of mass of coating.5 10 Calculations6 Annex A (normative)

20、Reagents for selective dissolution of metal layers.7 Bibliography13 ENISO10111:2001 iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out t

21、hrough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO colla

22、borates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are

23、 circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall

24、not be held responsible for identifying any or all such patent rights. International Standard ISO 10111 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings, Subcommittee SC 2, Test methods. Annex A forms a normative part of this International Standard. ENISO10111:2001