BS EN ISO 10140-2-2010 Acoustics Laboratory measurement of sound insulation of building elements Measurement of airborne sound insulation《声学 建筑构件隔声的实验室测量 空中隔音测量》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 10140-2:2010Acoustics Laboratorymeasurement of soundinsulation of building elementsPart 2: Measurement of airborne soundinsulationLicensed Copy: Wang Bin, ISO/EXCHANGE

2、CHINA STANDARDS, 03/06/2011 04:00, Uncontrolled Copy, (c) BSIBS EN ISO 10140-2:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO10140-2:2010. Together with BS EN ISO 10140-1:2010, BS EN ISO10140-3:2010, BS EN ISO 10140-4:2010 and BS EN ISO 10140-5:2010it

3、supersedes BS EN ISO 140-1:1998, BS EN ISO 140-3:1995, BS EN ISO140-6:1998, BS EN ISO 140-8:1998, BS EN 20140-10:1992, BS EN ISO140-11:2005 and BS EN ISO 140-16:2006 which are withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EH/1/6, Building acoustics.A list of o

4、rganizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 53732 5ICS 91.120.20Compliance with a British Standar

5、d cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 04:00, Uncon

6、trolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10140-2 September 2010 ICS 91.120.20 Supersedes EN 20140-10:1992, EN ISO 140-1:1997, EN ISO 140-11:2005, EN ISO 140-16:2006, EN ISO 140-3:1995, EN ISO 140-6:1998, EN ISO 140-8:1997English Version Acoustics - Laboratory mea

7、surement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) Acoustique - Mesurage en laboratoire de lisolation acoustique des lments de construction - Partie 2: Mesurage de lisolation au bruit arien (ISO 10140-2:2010)Akustik - Messung der S

8、challdmmung von Gebudeteilen im Prfstand - Teil 2: Messung der Luftschalldmmung (ISO 10140-2:2008) This European Standard was approved by CEN on 14 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

9、the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Ge

10、rman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cypr

11、us, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION CO

12、MIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10140-2:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA ST

13、ANDARDS, 03/06/2011 04:00, Uncontrolled Copy, (c) BSIBS EN ISO 10140-2:2010EN ISO 10140-2:2010 (E) 3 Foreword This document (EN ISO 10140-2:2010) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building eleme

14、nts and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at the latest by

15、March 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 20140-10:1992, EN ISO 140-6:1998, EN ISO 140-1

16、1:2005, EN ISO 140-8:1997, EN ISO 140-1:1997, EN ISO 140-16:2006, EN ISO 140-3:1995. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Re

17、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10140-2:2010 h

18、as been approved by CEN as a EN ISO 10140-2:2010 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 04:00, Uncontrolled Copy, (c) BSIBS EN ISO 10140-2:2010ISO 10140-2:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2

19、Normative references1 3 Terms and definitions .2 4 Facilities and equipment.3 5 Test procedure and evaluation 3 6 Test arrangement 5 7 Limits of performance.7 8 Precision.8 9 Test report8 Annex A (normative) Measurement of sound transmission through the filler wall and any flanking construction for

20、small-sized or reduced-size test openings 9 Annex B (informative) Form for the expression of results .11 Bibliography13 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 04:00, Uncontrolled Copy, (c) BSIBS EN ISO 10140-2:2010ISO 10140-2:2010(E) iv ISO 2010 All rights reservedForeword

21、 ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical

22、 committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of elec

23、trotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the

24、 member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for iden

25、tifying any or all such patent rights. ISO 10140-2 was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics. This first edition of ISO 10140-2, together with ISO 10140-1, ISO 10140-3, ISO 10140-4 and ISO 10140-5, cancels and replaces ISO 140-1:1997, ISO 140-3:1

26、995, ISO 140-6:1998, ISO 140-8:1997, ISO 140-10:1991, ISO 140-11:2005 and ISO 140-16:2006, which have been technically revised. It also incorporates the Amendments ISO 140-1:1997/Amd.1:2004 and ISO 140-3:1995/Amd.1:2004. ISO 10140 consists of the following parts, under the general title Acoustics La

27、boratory measurement of sound insulation of building elements: Part 1: Application rules for specific products Part 2: Measurement of airborne sound insulation Part 3: Measurement of impact sound insulation Part 4: Measurement procedures and requirements Part 5: Requirements for test facilities and

28、equipment Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 04:00, Uncontrolled Copy, (c) BSIBS EN ISO 10140-2:2010ISO 10140-2:2010(E) ISO 2010 All rights reserved vIntroduction ISO 10140 (all parts) concerns laboratory measurement of the sound insulation of building elements (see Ta

29、ble 1). ISO 10140-1 specifies the application rules for specific elements and products, including specific requirements for preparation, mounting, operating and test conditions. This part of ISO 10140 and ISO 10140-3 contain the general procedures for airborne and impact sound insulation measurement

30、s, respectively, and refer to ISO 10140-4 and ISO 10140-5 where appropriate. For elements and products without a specific application rule described in ISO 10140-1, it is possible to apply this part of ISO 10140 and ISO 10140-3. ISO 10140-4 contains basic measurement techniques and processes. ISO 10

31、140-5 contains requirements for test facilities and equipment. For the structure of ISO 10140 (all parts), see Table 1. ISO 10140 (all parts) was created to improve the layout for laboratory measurements, ensure consistency and simplify future changes and additions regarding mounting conditions of t

32、est elements in laboratory and field measurements. It is intended for ISO 10140 (all parts) to present a well-written and arranged format for laboratory measurements. It is intended to update ISO 10140-1 with application rules for other products. It is also intended to incorporate ISO 140-18 into IS

33、O 10140 (all parts). Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 04:00, Uncontrolled Copy, (c) BSIBS EN ISO 10140-2:2010ISO 10140-2:2010(E) vi ISO 2010 All rights reservedTable 1 Structure and contents of ISO 10140 (all parts) Relevant part of ISO 10140 Main purpose, contents a

34、nd use Detailed content ISO 10140-1 It indicates the appropriate test procedure for elements and products. For certain types of element/product, it can contain additional and more specific instructions about quantities and test element size and about preparation, mounting and operating conditions. W

35、here no specific details are included, the general guidelines are according to ISO 10140-2 and ISO 10140-3. Appropriate references to ISO 10140-2 and ISO 10140-3 and product-related, specific and additional instructions on: specific quantities measured; size of test element; boundary and mounting co

36、nditions; conditioning, testing and operating conditions; additional specifics for test report. ISO 10140-2 It gives a complete procedure for airborne sound insulation measurements according to ISO 10140-4 and ISO 10140-5. For products without specific application rules, it is sufficiently complete

37、and general for the execution of measurements. However, for products with specific application rules, measurements are carried out according to ISO 10140-1, if available. Definitions of main quantities measured General mounting and boundary conditions General measurement procedure Data processing Te

38、st report (general points) ISO 10140-3 It gives a complete procedure for impact sound insulation measurements according to ISO 10140-4 and ISO 10140-5. For products without specific application rules, it is sufficiently complete and general for the execution of measurements. However, for products wi

39、th specific application rules, measurements are carried out according to ISO 10140-1, if available. Definitions of main quantities measured General mounting and boundary conditions General measurement procedure Data processing Test report (general points) ISO 10140-4 It gives all the basic measureme

40、nt techniques and processes for measurement according to ISO 10140-2 and ISO 10140-3 or facility qualifications according to ISO 10140-5. Much of the content is implemented in software. Definitions Frequency range Microphone positions SPL measurements Averaging, space and time Correction for backgro

41、und noise Reverberation time measurements Loss factor measurements Low-frequency measurements Radiated sound power by velocity measurement ISO 10140-5 It specifies all information needed to design, construct and qualify the laboratory facility, its additional accessories and measurement equipment (h

42、ardware). Test facilities, design criteria: volumes, dimensions; flanking transmission; laboratory loss factor; maximum achievable sound reduction index; reverberation time; influence of lack of diffusivity in the laboratory. Test openings: standard openings for walls and floors; other openings (win

43、dows, doors, small technical elements); filler walls in general. Requirements for equipment: loudspeakers, number, positions; tapping machine and other impact sources; measurement equipment. Reference constructions: basic elements for airborne and impact insulation improvement; corresponding referen

44、ce performance curves. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 04:00, Uncontrolled Copy, (c) BSIBS EN ISO 10140-2:2010INTERNATIONAL STANDARD ISO 10140-2:2010(E) ISO 2010 All rights reserved 1Acoustics Laboratory measurement of sound insulation of building elements Part 2: M

45、easurement of airborne sound insulation 1 Scope This part of ISO 10140 specifies a laboratory method for measuring the airborne sound insulation of building products, such as walls, floors, doors, windows, shutters, faade elements, faades, glazing, small technical elements, for instance transfer air

46、 devices, airing panels (ventilation panels), outdoor air intakes, electrical raceways, transit sealing systems and combinations, for example walls or floors with linings, suspended ceilings or floating floors. The test results can be used to compare the sound insulation properties of building eleme

47、nts, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings. The measurements are performed in laboratory test facilities in which sound transmission via fl

48、anking paths is suppressed. The results of measurements made in accordance with this part of ISO 10140 are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions and total loss factor. 2 Norma

49、tive references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 140-2, Acoustics Measurement of sound insulation in buildings and of building elements Part 2: Determination, verification and application of precision data ISO 717-1, Acoustics Rating