1、BS EN ISO10472-3:2008ICS 97.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSafety requirementsfor industrial laundrymachineryPart 3: Washing tunnel linesincluding component machines (ISO10472-3:1997)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/0
2、8/2009 08:12, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 May2009. BSI 2009ISBN 978 0 580 63654 7Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 10472-3:2008National forewordThis British Stand
3、ard is the UK implementation of EN ISO10472-3:2008. It is identical to ISO 10472-3:1997. It supersedes BS ENISO 10472-3:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/33, Textile machinery.A list of organizations represented on this committee
4、can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE C
5、HINA STANDARDS, 27/08/2009 08:12, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 10472-3October 2008ICS 97.060 Supersedes EN ISO 10472-3:1997 English VersionSafety requirements for industrial laundry machinery - Part 3:Washing tunnel lines including component machine
6、s (ISO10472-3:1997)Exigences de scurit pour les machines de blanchisserieindustrielle - Partie 3: Trains de lavage incluant lesmachines composantes (ISO 10472-3:1997)Sicherheitsanforderungen fr industrielleWschereimaschinen - Teil 3: Durchlaufwaschanlageneinschlielich Einzelmaschinen (ISO 10472-3:19
7、97)This European Standard was approved by CEN on 12 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical re
8、ferences concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member
9、into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia
10、, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 20
11、08 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 10472-3:2008: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:12, Uncontrolled Copy, (c) BSIBS EN ISO 10472-3:2008EN ISO 10472-3:2008 (E) 3 Foreword The tex
12、t of ISO 10472-3:1997 has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10472-3:2008 by Technical Committee CEN/TC 214 “Textile
13、machinery and accessories” the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest
14、by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10427-3:1997. This document has been
15、 prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CEN
16、ELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem
17、bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10472-3:1997 has been approved by CEN as a EN ISO 10472-3:2008 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA
18、 STANDARDS, 27/08/2009 08:12, Uncontrolled Copy, (c) BSIBS EN ISO 10472-3:2008EN ISO 10472-3:2008 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by
19、the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive Machinery 98/37/EC, amended by 98/79/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and h
20、as been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements (except 1.7.4. (f) of that Directive and asso
21、ciated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:12, Uncontrolled Copy, (c) BSIBS EN ISO 10472-3:2008EN ISO 10472-3:2008 (E)
22、5 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to
23、Essential Requirements of the New Approach Directive Machinery 2006/42/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this
24、standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements (except 1.4.2.1 2, 1.7.3, 1.7.4.2 t) and u) of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable
25、to the product(s) falling within the scope of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:12, Uncontrolled Copy, (c) BSIBS EN ISO 10472-3:2008ISO ISO 10472-3:1997(E)iiiForewordISO (the International Organization for Standardization) is a worldwide federation o
26、f national standardsbodies (ISO member bodies). The work of preparing International Standards is normally carried out throughISO technical committees. Each member body interested in a subject for which a technical committee hasbeen established has the right to be represented on that committee. Inter
27、national organizations,governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaboratesclosely with the International Electrotechnical Commission (IEC) on all matters of electrotechnicalstandardization.Draft International Standards adopted by the technical committ
28、ees are circulated to the member bodies forvoting. Publication as an International Standard requires approval by at least 75 % of the member bodiescasting a vote.International Standard ISO 10472-3 was prepared by Technical Committee ISO/TC 72, Textile machinery andmachinery for dry-cleaning and indu
29、strial laundering, Subcommittee SC 5, Industrial laundry anddry-cleaning machinery.ISO 10472 consists of the following parts, under the general title Safety requirements for industrial laundrymachinery: Part 1: Common requirements Part 2: Washing machines and washer-extractors Part 3: Washing tunnel
30、 lines including component machines Part 4: Air dryers Part 5: Flatwork ironers, feeders and folders Part 6: Ironing and fusing pressesLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:12, Uncontrolled Copy, (c) BSIBS EN ISO 10472-3:2008ISO 10472-3:1997(E) ISOivIntroductionThis pa
31、rt of ISO 10472 is intended to instruct the designer of industrial laundry machinery in a systematicmanner, focusing on his particular type of machine, regarding the relevant essential safety requirements,and to suggest possible state-of-the-art safety solutions.The extent to which hazards are cover
32、ed is indicated in the scope of this part of ISO 10472. In addition,machinery should comply as appropriate with ISO/TR 12100-1 and ISO/TR 12100-2 for hazards which are notspecifically referred to in this part of ISO 10472.All examples given in this part of ISO 10472 represent the state of the art. E
33、quivalent solutions areacceptable, provided they attain at least the same safety level.The designer is presumed to have taken into account all the provisions of ISO 10472-1 before consideringthis part of ISO 10472.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:12, Uncontrolled
34、Copy, (c) BSIBS EN ISO 10472-3:2008INTERNATIONAL STANDARD ISO ISO 10472-3:1997(E)1Safety requirements for industrial laundry machinery Part 3:Washing tunnel lines including component machines1 ScopeThis part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with was
35、hingtunnel lines including component machines such as: continuous tunnel washing machines; squeeze presses or centrifugal extraction machines; transfer conveyor systems; automatic transfer tumblers; loading or unloading system interfaces; access platform and ladders.This part of ISO 10472 does not c
36、over particular hazards for continuous stand-alone washing lines forendless towels.This part of ISO 10472 does not cover the hazards caused by processing work which may create anexplosive or flammable atmosphere inside the machine.This part of ISO 10472 complements the basic requirements laid down i
37、n ISO/TR 12100-1 andISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards(see EN 1050) and on selecting measures for attaining the required safety level.This part of ISO 10472 does not apply to ancillary equipment, e. g. chemical store and supply p
38、umps, steamvalves and supply pipework, vent systems, work feed systems and discharge systems and ducting to theatmosphere.2 Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisions ofthis part of ISO 10472. At the time of publication
39、, the editions indicated were valid. All standards are subjectto revision, and parties to agreement based on this part of ISO 10472 are encouraged to investigate thepossibility of applying the most recent editions of the standards indicated below. Members of IEC and ISOmaintain registers of currentl
40、y valid International Standards.ISO 6182-1:1993, Fire protection Automatic sprinkler systems Part 1: Requirements and test methodsfor sprinklers.ISO 10472-1:1997, Safety requirements for industrial laundry machinery Part 1: Common requirements.ISO/TR 12100-1:1992, Safety of machinery Basic concepts,
41、 general principles for design Part 1: Basicterminology, methodology.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:12, Uncontrolled Copy, (c) BSIBS EN ISO 10472-3:2008ISO 10472-3:1997(E) ISO2ISO/TR 12100-2:1992, Safety of machinery Basic concepts, general principles for design
42、 Part 2:Technical principles and specifications.ISO 13849-1:1), Safety of machinery Safety-related parts of control systems Part 1: General principlesfor design.ISO 13852:1996, Safety of machinery Safety distances to prevent danger zones being reached by theupper limbs.ISO 14119:1), Safety of machin
43、ery Interlocking devices associated with guards Principles for designand selection.EN 616:1), Continuous handling equipment and systems Common safety requirements for design,manufacturing, erection and commissioning stages.EN 620:1), Continuous handling equipment and systems Equipment for mechanical
44、 handling both unitloads and bulk materials Special safety requirements for design, manufacturing, erection andcommissioning stages.EN 746-2:1997, Industrial thermoprocessing equipment Part 2: Safety requirements for combustion andfuel handling systems.EN 953:1997, Safety of machinery General requir
45、ements for the design and construction of guards (fixed,movable).EN 1037:1995, Safety of machinery Prevention of unexpected start-up.EN 1050:1996, Safety of machinery Risk assessment.EN 1760-1:1997, Safety of machinery Pressure sensitive protective devices Part 1: General principlesfor the design an
46、d testing of pressure sensing mats and floors.EN 1760-2:1), Safety of machinery Pressure sensitive protective devices Part 2: General principles forthe design and testing of pressure sensitive edges and pressure sensitive bars.EN 50100-1:1), Safety of machinery Electro-sensitive protective devices P
47、art 1: General requirementsand tests.EN 60204-1:1992, Safety of machinery Electrical equipment of machines Part 1: General requirements.IEC 204-1:1992, modified3 DefinitionsFor the purposes of this part of ISO 10472, the following definitions apply:3.1washing tunnel lineComplete integrated system of
48、 linked machines for the washing, moisture extraction and drying ordisentangling of discrete batches of textile fabric, including all necessary equipment for supply of water,steam, gas, electricity and chemicals.3.2continuous tunnel washing machineMachine designed to wash items in successive loads a
49、s a continuous process.NOTE This machine may consist of one cage rotating around a longitudinal axis and subdivided into separatecompartments, or several cages or several machines linked by means of a transfer system.1)To be published.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2009 08:12, Uncontrolled Copy, (c) BSIBS EN ISO 10472-3:2008ISO ISO 10472-3:1997(E)33.3squeeze pressMachine for the mechanical extraction of moisture from textile fabrics by the application of
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1